How to roll back to a windows 7 restore point. How to create a restore point in Windows and roll back the system. System recovery settings

There are times when, after installing a program or other actions: the Windows operating system does not work correctly; programs that worked do not work; previously working games are not launched. In this case, a very wonderful feature from Microsoft will help us, likesystem Restore (rollback to restore point). Also, this function can help us in case your computer is infected with ransomware banner. In this article we will tell you how to do it, what you need to make it work.

1. If the system is functional.

On the desktop, right-click on the "computer" or "my computer" icon and select properties,

sthen on the right side select system protection.

Attention! Here we can see if this component is enabled and

how it is configured.

If next to the specified system disk is not written switched on, we cannot restore the system, but we can enable this function by clicking on any disk and pressing the button customize, sthen check the box next to restore system settings and previous versions of files, select a specific space with the slider that will be used for recovery files. The more space is allocated, the more restore points the system will create. So if your component is enabled, press the button recovery

Eif you are satisfied recommended recovery(the date of the computer state corresponds to the time when everything worked for you), click further,if not, then you need a tab choose a different restore pointand so on.

In this window you need to check the box show other restore pointsand select the most desired point. We selected we press further.

Push readyand we are waiting for the end of the process (If you have a laptop or netbook, make sure that the battery is well charged, if the charge is low, connect it to the power source)

2. If the system does not turn on or when you turn on the ransomware banner pops up

When loading the operating system, press the key F8,further

troubleshoot computer problems and Enter.

choose the desired language

Hello everyone who has a buggy operating system, a "blue screen of death" pops up or other failures occur that depress the performance of the computer.

I want to help you resolve these issues by showing you how to roll back Windows 7. In this article, I offer TOP 5 effective and easy ways to restore the OS. So do not rush to seek help from specialists - you can do it yourself.

Method 1. The fastest

Does the PC start up the system as usual? How it works is another matter. The main thing is that it is loaded. So, you can also try this recovery method:

• There is a search bar in the start menu. Enter the words "System Restore" in it.

• Click on the corresponding result, and then on the "Next" button.
• In the next window, you will see a list of the saved OS configurations. She makes them during emergency shutdowns of the computer.

• Roll back to the restore point when the operating system was still working normally and click "Next" again.

This screenshot of mine shows only one point (for example). If you didn’t remove the points then you should have a lot more of them naturally.

• In confirmation, click the "Finish" button, and then - "Close".

Then a window will appear informing you about the preparation for rollback. After that, the computer will restart and you will see a message that the process was successful.

Method 2. If there are problems with starting the OS

Does the system not want to boot normally? Let's roll it back from. Here's the instruction:

• When the PC just starts to start, press the F8 key until a black settings window opens.

• Next, the computer will start booting the system, only in safe mode. After it completes, follow the same process as in the previous instructions. Upon completion, Windows will restart in normal mode.

By the way, if you don't want to choose a restore point yourself, you can provide it to your computer. In this case, in the second step, click the Last Known Good Configuration option.

Method 3. Nothing helps?

Having difficulty turning on your computer in any mode? Arm yourself with a bootable disk with a "seven" or.

Usually the system boots from the hard drive, but in your case, you should set the parameters in the BIOS so that it starts from the disk in the drive. How to do it?

• In order to get into the BIOS, you must press the Delete or F2 key at the initial stage of turning on the computer.
• Then you need to go to the "Advanced BIOS Features" tab, and after it - to the "Boot Sequence", or "Boot device priority" (depending on the type of your BIOS).

• Put "CD / DVD" first on the list.

• To save the settings press F10 and then Enter.

When you start the boot disk and see its menu on the screen, follow these steps:

• Select the "System Restore" option.

• The search for installed OS will start. Do you have several of them? Then specify the one you want to rollback and click the "Next" button.
• You will be prompted to select a recovery tool. You know where to click.

• Then you should follow the same steps that I described in Method 1.

In principle, this is all so. I think the described methods on how to roll back Windows 7 to a restore point are suitable for you.

There is, of course, another option - this is to restore using various Live CDs. There will be a separate post about this, since there is a lot of information there and I see no reason to enlarge this article. I don’t want to mix everything into porridge as they say :).

Okay, I hope this article was useful to you at least a little.

This step-by-step instruction will show you how to roll back Windows 7. You may need to rollback if your computer starts to malfunction: it does not work properly or does not turn on periodically. Rollback Windows 7 will allow you to get files and system settings back from a two-day-old backup, for example.

How to roll back Windows 7:

The first method is suitable for users whose computer works, but works poorly. This often happens after installing a new program. In this case, rolling back Windows 7 should help.

• Press the "Start" button on the computer;
• We drive the word "recovery" into the search line;
• From the presented list, select "System Restore".

We see a window in front of us in which you need to click "Next".

How to rollback windows 7 to a specific date? We just decide on the date until which the rollback will be carried out. Click "Next".

We indicate that we have chosen everything correctly and click "Finish". We see another warning, our choice is "Yes".

After that, you will see a window with preparation for recovery. The system will reboot and you will see a message indicating that the system has been restored successfully. If your problem is not resolved, then another Windows 7 rollback point should be selected. If this does not help, then it is better to contact a computer specialist.

How to rollback Windows 7 from Safe Mode:

Windows 7 system rollback can be performed from Safe Mode. This method is suitable when the system cannot be started normally. First, we go into safe mode. To do this, reboot the system and as soon as the computer starts to turn on, press F8.

• After that, from the pop-up window you need to select the "Safe Mode" boot type;
• Press "Enter". We are waiting for the system to boot into safe mode;
• Then all actions are identical to the first method.

After that, the computer will reboot and start working normally. Of course, if the rollback point is chosen correctly.

How to roll back Windows 7 updates:

Rolling back a Windows 7 update is very easy. To do this, follow the simple instructions. In the "Start" menu, open the "Control Panel". We select the item "System". After that, go to "View installed updates. We select the one that prevented us from updating and click "delete". Perhaps this is the easiest way to rollback Windows 7.

From this article, you learned 3 ways to roll back Windows 7. They are all workable. And if you strictly follow the instructions, the chances of solving the problem are very high.

And how to create a restore point, I have already written. Now is the time to write how to do system restore in Windows 7, and to put it more simply, now I will write about how to roll back the system.

If you have any problem with your computer, well, for example, it has become very buggy, or even worse, it does not start at all, then the first step is to try to roll back the system, thereby we will return the settings and system files from the backup that was created for example two days ago, when the computer was still working normally.

This is a good opportunity to quickly fix your computer and get it back to normal working order. I will write three ways that you can rollback in Windows 7.

• The first way: how to rollback from under Windows.
• Second way: how to do a system recovery from safe mode.
• Method three: recovery using a Windows 7 boot disk.

During a system restore, your personal files will not be affected.

System rollback from Windows 7

This method is useful when the computer turns on and works, no matter how it works, the main thing is that it works :). For example, after installing a program or driver, there were problems with the computer. You removed the program, but the problems remain. In this case, rolling back the system should help.

We do this: press "Start" and start writing in the search bar "Recovery"... Find and run the program in the search results "System Restore".

A window will open in which we click "Next".

Now you need to select the restore point to which you want to roll back and click "Next".

Confirming the restore point. Click “Finish”.

One more warning, click “Yes”.

A recovery preparation window will appear. Then the computer will restart and a message will appear stating that.

We are waiting for the computer to boot into safe mode. Further, all actions are almost the same as restoring from under Windows, but I'll write again, just in case :).

Click start and enter "restored ...", run the utility "System Restore".

Since I just did a system rollback, I got an item with the ability to cancel the restore. We choose "Choose another restore point" and click "Next" (you probably just need to click on).

Select the point to rollback and click "Next".

Click on the "Finish" button.

We answer “Yes” to one more warning.

The computer will restart and turn on in normal mode. Of course, if a rollback to the previous settings helped to solve your problem with the system boot.

Rollback to previous settings using a boot disk

I left this method for dessert, because here you will need a bootable disk with Windows 7. But this method has its advantages. For example, you can rollback when even safe mode does not work, in short, in the most severe cases :).

As I already wrote, you need a bootable disk with Windows 7, the article describes how to create it. Then you need to enter BIOS and boot from the installation disk.

The system searches for installed systems. If you have more than one of them, then select the one you need and click "Next".

Then choose "System Restore"... Further, the whole process does not differ from the first two methods.

In the next window, click the "Finish" button and respond to the warning.

We pull out the disc from the drive, and the computer should boot in the usual way. Everything!

This is an interesting story about how to roll back the system, you can finish :). It seems that I wrote everything, I am waiting for your comments and wishes in the comments. Good luck!

So, today we will talk with you about how to roll back the system in Windows 7. The point is that modern viruses and Trojans are capable of causing all sorts of failures. Then the computer stops working normally. So there is a need to do "kickbacks". Let's learn how this is done.

If there is no choice

But when is a rollback necessary for Windows 7? Let's try to figure it out with you in this difficult matter.

To begin with, it is worth understanding that such "things" are not done just like that. You must have a good reason for any manipulation with your operating system. The first option, when the user may need to roll back the system for Windows 7, is trivial clutter, which cannot be corrected by normal methods. Moreover, this option is suitable only when the computer starts to slow down due to "trash".

The second reason why you may need to rollback Windows 7 is constant crashes and factory reset.

Of course, one cannot ignore such a scenario as the introduction of a virus or trojan onto your computer. Sometimes it is the rollbacks that help you cope with the problem. So, now let's see how to properly prepare and carry out the "operation".

Training

Of course, after you have noticed that your computer has ceased to "obey" and constantly slows down, then a completely logical conclusion comes to mind - to roll back. After all, it returns the computer to the state in which it was on the selected date. Very comfortably. True, if you decide to pull off such an action, then you should prepare well. In Windows 7, system rollback can be accomplished in several ways, which we will talk about today. But for now we are just getting ready.

You will need to save all your data that is important. Of course, as a rule, rollbacks do not affect personal information, but in case of a "failure" during the process, you can "lose" Windows along with all the data. So it's better to play it safe. In addition, it is advisable to scan your computer for viruses. Some Trojans can interfere with the recovery process. So, if you are not afraid, then all that remains is to choose how to rollback the Windows 7 system, and then proceed to action. Let's see what's available for this.

System

Well, the first and most popular way is to restore the "operating system" using built-in functions. It is very convenient to do this in Windows 7. System rollback will occur rather quickly, however, you will need to enable the function of setting "rollback points" in advance. It is enabled by default.

But how can you roll back the operating system when you logged into it? To do this, you need a "recovery tool". It can be found in the Start Menu. From there, go to "Standard" and then select "System". Then it remains only to click on the "recovery tool". Now let's do a system rollback together in Windows 7.

After you have clicked on the button, a window will open in front of you, which will warn you of the inevitability of the system returning to the state that you have "installed" now. Just agree with him and follow along. Now you need to select a restore point. As a rule, they are done automatically. If there are none, then you are out of luck - if successful, all settings will "fly off" to "zero". Click next and wait for the process to finish. During this process, the system may reboot several times. Now you know how to roll back the system in Windows 7. But this is only the first option. Others are worth talking about.

Command line

Of course, you can't go anywhere without the so-called command line. It is she who will help us carry out today's idea. True, you need to carry out the process correctly so as not to lose important data.

First thing you need to do is start the system in safe mode. Made? Call the command line (by pressing Win + R), and then enter a special combination. Suitable for performing a system rollback in Windows 7 with the "rstrui.exe" command. Now press "Enter". The already familiar "restorer" window will open in front of you. In it, select a rollback point and confirm your actions. Now it only remains to wait for the completion. In Windows 7, rolling back the system when booting in Safe Mode is another very popular method used by system administrators. But there is one more scenario. It is not suitable for everyone. Let's get to know him.

Installation disc

So, another way that you can roll back the system in Windows 7 is with the installation disc. If you already have one, that's great. No? Then it is better to use one of the already familiar options. After all, the whole problem is that the computer will refuse to work with a disk that is not identical for your OS.

In the case when the user uses a "pirate", especially one that he himself installed, problems should not arise. In general, let's assume that we already have a disk. Now you need to set up your computer and get started.

Insert the disc into the floppy drive and enter BIOS. There you need to put the boot from DVD-ROM first "a. Save and restart your computer. Wait until the Windows 7 installer starts to open. You will see the system rollback immediately.

Look in the lower left corner of the window - there will be a "recovery". In the window that opens, select "system restore". Read the information about the irreversibility of the process and click "next". Now it's worth choosing a rollback point. If the computer was configured correctly, then you will already have at least 2-3 pieces. Have you chosen? Click next.

In the window that opens, click "done". A warning from the series "did you think well?" Will pop up. Yes, we were good at brains! So, boldly press "yes" and watch how our system will recover. After that, just click on the "restart" button. That's all - you know how to rollback with all possible methods.

Doesn't always help

True, very often it turns out that in Windows 7, system rollback does not help. Moreover, it can start and then "stall" in the middle or, even worse, at the very end. And no matter how hard you try to get the recovery tool to work, you can't do it. What then?

In this situation, only a complete reinstallation of "Windows" is threatened. So, keep a close eye on your computer, make rollback points to be prepared for the fact that you need to perform a recovery. Good luck!