How to disable the proximity sensor on Android? Disabling the proximity sensor on Androide How to enable the proximity sensor asus zenfone 2

The Android operating system contains many useful functions, but some of them may not be needed, in particular the proximity sensor. This is a special sensor that is installed on the front side of the device, and when an approaching object is detected, it performs some action, in particular:

1. Turn off the backlight of the phone when bringing the smartphone to your ear;
2. Automatic call reception when the motion sensor is triggered;
3. Automatically increase the volume when the phone is in your pocket.

In some cases, it does not work correctly, so users prefer to turn it off for the convenience of using a mobile phone. There are several ways to disable the sensor: using standard settings, third-party software, and using

Using default settings

A simple and extremely affordable way to disable the proximity sensor on Android is to use the standard settings. In each model, this function can be located in different places. However, the general "formula" for disabling a sensor consists of the following steps:

1. Go to the "Settings" section of your android smartphone.
2. Select the sub-item "Calls";
3. Find the item "Proximity sensor", and then uncheck it.

In some devices this item is called differently, in particular, "turn off the screen during a call." Then you can make a call and check that everything is turned off.

Using third-party software

There are times when such manipulations have no effect and the proximity sensor still works as before. There is no need to be upset, because on the Internet you will find several applications that allow you to disable this sensor bypassing the standard android settings.

One such application is Smart Screen Off. It provides ample opportunity to customize various sensors and phone buttons. The functionality of this program also includes disabling the proximity sensor. In the program interface, you need to find the appropriate item, respectively, disable the proximity sensor.

After that, when you call and bring the device to the auricle, the sensor will not work, that is, it will not perform any action. You can download the application on Google Play, and then:

1. Enter the title in the search bar;
2. Go to the program page;
3. Click install.

Engineering menu and service codes - the solution to any problems

Most modern mobile operating systems, as well as Android, have a so-called engineering menu. It is an advanced smartphone settings that can be used to configure almost any component of the phone, including the proximity sensor if it is not working properly. Before using this menu, be sure to read all the information you can find for your model. The engineering menu is used only by developers or advanced users. Setting the wrong settings can lead to extremely unfavorable consequences. To enter the engineering menu, you must:

1. Enable dialing on your phone.
2. On the keyboard, enter the following combination of characters - * # * # 3646633 # * # * (depending on the manufacturer, there may be other combinations).
3. If after that the engineering menu does not appear, press the call button.

There is an easier way - enter the service tag. This is a special combination of symbols and numbers, thanks to which you can perform a specific action. If the sensor does not work correctly, you should find a code for your specific phone model by which the shutdown will be performed. Be sure to check out several sources of information on the net, as there are engineering codes that produce.

Other solutions to the problem

Incorrect operation of the sensor can be associated with errors in the Android OS. Try updating and then upgrade to the new version. To do this, follow these steps:

1. Go to phone settings.
2. Select "About phone".
3. Click on "System Update".

For users of modern smartphones in various circumstances, it is important to learn how to disable the proximity sensor on an android, which is activated when you try to bring the device to your ear during a conversation. In general, such features are quite useful and allow, in addition to lower power consumption, to prevent accidental touches. However, if you need to use a messenger or a smartphone at the same time while bringing your hand to the device, the display may go blank. Also, in situations where the screen is not deactivated during calls or, conversely, it turns off uncontrollably, it is highly probable that the cause of the malfunction is presented in the built-in sensor.

Main problem

Mobile gadget owners and experts often point out that the accumulation of dirt is a common cause of problems with the proximity module. It is localized in the upper area of \u200b\u200bthe case, while in addition you can find a number of other sensors that are built into the smartphone. Visually, the elements resemble small slots located near the speakers and covered with glass. In case of debris penetration, the performance of the components may be impaired, therefore, before fully deactivating the sensor, it is recommended to thoroughly clean the device.

To remove foreign particles from the speaker for normal operation, several simple steps are proposed:

1. Turn off your smartphone and use compressed air on the speaker grill;
2. Make sure to remove all the dirt, and if necessary, you can use a toothpick or other improvised means that will be effective for removing fine dirt or dust;
3. Restart the device and try to use the functionality normally.

How to disable the proximity sensor on Android

To complete the procedure yourself, you need to implement a simple procedure on your smartphone:

1. Open the desktop and go to the settings section, after which the category " System Applications»;
2. From the menu that opens, select the section " Phone»;
3. Go to " Incoming calls»;
4. Deactivate the proximity module by unchecking the corresponding function in the interface. The whole process and individual steps may differ slightly on different smartphones using other versions of Android software and proprietary skins. At the same time, for the current instruction, a Xiaomi smartphone with the MIUI 9 version was used;
5. When finished, check the result during the conversation. If all actions are performed correctly, the display will not turn off when the smartphone is brought closer to the ear or when objects are brought to the sensors on the front panel of the smartphone.

Disable proximity sensor on Android using tools

If the above instructions are ineffective in practice for individual reasons, then you can use the specialized mobile program Smart Screen Off. In fact, the program, in addition to a tool for deactivating modules, allows you to perform a calibration, which helps to restore correct operation in case of problems.

The application can be downloaded independently in the public domain through official resources, therefore it is not recommended to use and download to a smartphone any software that is distributed through non-recommended sites. It is advisable to use only the built-in Play Market. Otherwise, the possibility of downloading viruses to the device is not excluded, which will further complicate the use of the phone and the troubleshooting process.

Other ways

In order to deactivate the proximity sensor, you can use special codes that must be entered on the virtual keyboard of your smartphone. However, in practice, for each device, the user will need to independently find the desired combination, since they are unique and cannot be used on smartphones of all manufacturers and operating systems everywhere. To find such digital parameters, it is advisable to use the publicly available search, offering your own model of a mobile device.

For example, on many smartphones, a request is extremely common, which is represented by the sequence * # * # 0588 # * # * ... Open the phonebook section and enter the proposed code in the number field, then click on the call button. Despite the possibility of no effect, it is recommended to test several methods, starting from the simplest.

It is also important to note that in case of malfunctions caused by technical breakdowns, you should contact the workshop, since the likelihood of more serious damage and failure of the entire mobile device is not excluded.

It should be assumed that you have learned how to disable the proximity sensor using the example of the Android mobile operating system, so if any difficulties arise, you can use both the built-in functionality and a separate program or more unique methods. In other situations, you can turn to thematic forums to find out the cause and solve a problem that has not received significant publicity. You can also describe your own peculiarities of the problem or the reasons for the need to deactivate the automatic screen off function.

Our site has already talked about what is on smartphones and phones. Recall that this is an electronic device for registering the presence or absence of a certain class of objects in its area of \u200b\u200boperation. In simple terms, the sensor turns off the screen if you bring the smartphone to your ear or just cover it with your hand. This is done so that during a conversation there is no possibility to accidentally press the touch keys.

In some cases, it is required to disable the proximity sensor. Can this be done? It is possible, but not all devices have such an item in their settings. For example, Samsung smartphones have. Let's show an example on it.

Go to "Settings".

Select the "Device" section, the "Calls" subsection.

Uncheck the Turn off screen during call checkbox.

After that, the proximity sensor will be disabled.

The second way is to use special applications. They do not require obtaining, however, they need administrator rights, so you use such an application only at your own risk. Removing such applications may cause confusion, since for this you first need to disable administrator rights, and such rights are disabled in the settings of the application itself, after which it can be removed.

For example, you can use the Sanity app. It has a whole section called Proximity that has a lot of settings for the proximity sensor.

As you can see, nothing complicated, but we strongly recommend using the standard smartphone settings without installing third-party applications.

Most often, the proximity sensor (or Proximity Sensor) is installed in the same area with the front camera lens and speaker. Therefore, if you bring your smartphone to your ear during a phone conversation, it will send a signal to the processor and lock the screen, protecting it from accidental clicks.

If the sensor stops working normally or you don't need it, then we will tell you how to turn off the proximity sensor on Android.

On some Android devices, the proximity sensor is disabled through the standard settings menu. Depending on the version of the operating system, this option may be hidden in different menus. Procedure:

Step 1... Go to "Settings" and find the item here "System Applications".

Step 2... Click on the line "Challenges" and select "Incoming calls".

Step 3... Find the line "Proximity sensor" and put the slider in the state "Turned off".

Depending on the manufacturer of the smartphone and the version of the operating system used, the names of some menus and options may differ.

How to disable the proximity sensor via Sensor Disabler

Price: Free

If the required option is not in the system settings, then on an Android phone you can try to disable the sensor using a third-party application. In this tutorial, we will be using Sensor Disabler. Procedure:

Step 1... Launch Play Store and download Sensor Disabler to your phone. Wait for the installation to finish and click on the button "Open"to start using the application.

Step 2... Call up the menu "Settings"... To do this, swipe to the right or click on the three-bar icon (in the upper left corner). In the menu that opens, click on the item "Proximity".

Step 3... Please select "Remove sensor"to disable the proximity sensor ( "Do nothing" - leave the default values, "Mock sensor values" - calibrate values \u200b\u200bmanually) and click on the icon "Save" in the lower right corner.

The changes will take effect immediately. With Sensor Disabler, you can also return the default values \u200b\u200bat any time. To do this, in the settings "Proximity" should choose "Do nothing".

How to calibrate the proximity sensor

Price: Free

If the proximity sensor stops working normally (for example, it does not work when approaching or randomly locks the screen while listening to voice messages), then it can be calibrated. To do this, you will have to use a third-party application.

In this tutorial we will use the Proximity Sensor Reset Repair utility from Mobile Direction. This is a free application with which you can configure the proximity sensor on Android. Procedure:

Step 1... Launch the Play Store on your phone and use the search bar to find "Proximity sensor Reset repair".

Step 2... Click on the green button "Install" and wait for the installation to complete. Then tap on "Open"to start using the utility.

Step 3... On the home screen, click on the big button "Fix It".

Step 4... Calibration instructions will appear. Follow the prompts on the screen to set up your sensor.

Step 5... Finally, tap on the checkmark icon to confirm and save the new calibration settings, then tap on the button "OK".

Reboot your device for the changes to take effect. If, after the steps described above, the sensor was still not configured, then most likely the problem is of a hardware nature and the device needs to be repaired.