How to reduce high ping to server or game. How to reduce high ping to server or game High ping of a router due to a network adapter

Probably the worst dream of any avid gamer is a high ping in the game. And how to lower it is one of the main questions in such a situation.
What are pings? This is the time of passage of a special ECHO package from the computer to the server of the online game (World of Tanks, Warface, CS, etc.) and back. It is best played when it is low. With a high ping, it's bad to play and everything slows down. If it's too big, it's impossible to play. There are delays, which in the language of gamers are called "lags". What can be done and how to be in this case ?!
First you need to determine which ping is good, which is normal, and which is bad. Well, everything is simple - the lower the indicator, the better. On average, a good ping is considered up to 30-40 milliseconds. From 40 ms. up to 100ms, depending on the game, is considered normal. But above a hundred, the indicator is considered bad. But then again, light and simple online games can work fine at high values \u200b\u200b(for example, the old "Contra"), while the same Dota or Warface will start to lag wildly.
There are two kinds of factors affecting response speed - which depend on your hardware and which depend on the provider. How to define "Where to dig"?

From this trace, it is immediately clear that the problems begin immediately, already on the subscriber's equipment, namely on a home router or modem:

And the next trace shows the appearance of significant delays on the 4th hop, that is, already on the provider's side:

For reference - all points after the first, that is, after your equipment, this is the area of \u200b\u200bresponsibility of your telecom operator.

If the problem is on your side:

First things first, eliminate any third party load on the communication channel. Do not be surprised that the ping is high if at this time you download two or three movies from the Internet. Disable the torrent client and any other file sharing programs. Check if any application is downloading a large archive with updates.

The second thing that can significantly affect the response rate is the firewall, or firewall. Try to add the game to the list of exceptions to reduce ping. For the sake of experiment, you can try to turn it off altogether and take a measurement.

If you have a router and you are connected to it via WiFi, then try connecting via a cable and see if there is a difference. The fact is that sometimes, for various reasons, the speed of the wireless network can drop significantly, due to which the connection becomes unstable and even packets can be lost. Cable connection will be able to completely eliminate this scenario.

Also, sometimes placing the computer's IP in the DMZ in the router settings helps to slightly reduce the ping. This allows most of the packets to go directly to the computer without being filtered by the router's firewall.

Ping increases on the provider side:

If there are any problems on the side of your telecom operator, then in this case there are only two ways out to reduce the ping in Warface, Worlds of Tanks or another game.

1. Communication with technical support
This path can only give a result if the high ping starts already at the second or third step of the trace, that is, the reason is in the line or access equipment.
For example, if you are connected using ADSL technology, then it makes sense to apply for enabling the special Fast Mode on the port. It turns off the error correction mode, due to which the travel speed is slightly increased. But it won't be possible to reduce pings especially strongly.

If you are connected via fiber optic (FTTB, GPON), then it is unlikely that anything can be done at all. Therefore, it remains to wait. Perhaps this is caused by a malfunction of the network equipment and the next couple of days the malfunction will be eliminated and the ping will become normal.

2. Change of provider
If the trace to the game server is very large (12 steps or more), then it makes sense to walk among friends connected to other telecom operators and start tracing. Providers usually use different trunk channels and you can choose the one who will have the shortest trace and the smallest ping. Most often, by the way, this is the only working way to reduce ping and achieve a high-quality and comfortable level of network play.

Every modern child living with video games, and an adult too, has probably repeatedly come across such a concept as "ping". It is also an integral part of the computer networks set up by the master. Next, let's take a closer look at what this concept means and how to reduce ping in order to optimize gameplay or network performance.

What is ping and how to check it

Ping is a time period during which one information packet is transmitted from the client to the server and returned. Associating this process with real life, we can say that ping is like the time spent on the transition from home to the store and on the way back. The store is the server and the person is the client. The unit of measurement is millisecond (ms).

To determine the Windows OS ping, it is enough to enter the command line by entering the cmd command in the Run menu, which is called by the WIN + R key combination, or the Start menu search bar.

Then, you need to enter the "ping" command and specify the address of the remote machine / site through a space, the connection to which will be checked.

As you can see in the screenshot, the basic information allows you to see the average value and determine if there are sharp changes in case of a bad connection.

How to reduce ping - current ways

There are a number of basic actions during which the user may think that the ping value should be reduced relative to the connection to a particular server / site. Of course, this is necessary when it comes to playing online video games, where it greatly influences how the player's battle goes. It may also be required when setting up an integral computer network, where you simply cannot do without a high-quality connection.

If it is excessively high or constantly "jumps" relative to any of the directions of the client's connection to the server, then the problem may be as follows:

• Bad internet connection. It is corrected as follows: the method of connecting to the network changes (the modem changes to a direct cable connection or another), the provider changes, if a low-quality connection is its flaw, the tariff is updated to increase the bandwidth allocated to the channel client.
• Outdated network card driver. Everything is quite simple - you need to update it by downloading the necessary files from the manufacturer's website or any other thematic resource.
• Viruses, startup list, bootloaders. All of the above can have a negative impact on the speed of the network. Naturally, the system needs to be cleaned of viruses, the startup list should be adjusted, leaving only what is necessary, the bootloaders should be disabled at the time of the game or any other actions related to connecting to a specific server. The latter is especially true for torrent clients, which, when downloaded, can "clog" the entire Internet channel allocated to the user.

You can also make certain changes to the system registry, but you should do it with caution, remembering that the consequences of the performed actions with the registry are sometimes quite difficult to fix.

After starting the registry with the "regedit" command entered in the same paragraphs as for the command line, you must do the following:

Parameters that do not exist can be created, but, again, we remind you that it is better to entrust the introduction of such changes to a specialist who feels confident when setting up system registry configurations. All of these actions will help reduce, but be careful.

How to reduce ping on the modem

People who use 3G modems to connect to the Internet are a separate category of users. The problem with working with such equipment is that they pick up the signal from the mobile towers of various operators, but this signal itself can be blocked by anything. All actions to improve the operation of a 3G modem and reduce ping require an increase in the power of the device itself.

Experienced players and specialists in working with such devices recommend the following methods of signal amplification:

Each of these actions will have a positive effect on the speed of the Internet and will significantly reduce the ping. You can check the connection level through the MDMA (Mobile Data Monitoring Application) application, which, after downloading and starting, will determine the connected modem (maybe not the first time), and then give the signal quality value in dbm units. Dynamic reading of information in real time with a delay of 5-30 seconds will determine the best place to place the modem.

How to reduce ping in games

Finally, we come to the most important stage, since the decrease in online games worries users most of all, because poor Internet connection and its other defects affect their success in battles. Let's consider making the necessary settings using the example of two very popular games: World Of Tanks and Counter-Strike: Global Offensive.

How to reduce ping in CS: GO

When playing CS: GO, you can change the ping by all the means described above, as well as by competently making changes to the launch parameters. To do this, you need to enter the library of games of the STEAM platform and select CS GO in it. Further actions are shown in the screenshot.

In the window that opens, click "Set launch parameters" and enter the values \u200b\u200bshown in the screenshot in the line that appears.

Also, the player is advised to indicate the optimal ping to the game to start the competitive mode so that it does not select servers for him more than a certain bar, if this, of course, is possible. To do this, in the menu "Settings" - "Game options", you must set the slider to the minimum value.

How to reduce ping in World Of Tanks

The peculiarity of World Of Tanks is that the game is played on a large number of servers, each of which is located regionally in different locations. Below is the geographical location of the main servers from the Russian cluster of the game.

You can control it by installing a special game modification or software, such as WOT Pinger.

With the help of this software, you can track the servers that are most optimal for the game and use them exclusively.

Thus, we can conclude that ping has a significant impact on the efficiency of working with certain servers / sites. To reduce it, you can use any of the above methods. You can also contact the specialists who will make the necessary settings in the system and specific applications, significantly speeding up the operation of your computer / laptop. It is recommended to order the same setting from the provider, where the user will be able to tell which high-speed Internet access tariff will be much more profitable for him.

Now it becomes even easier to check the quality of the connection. The built-in tools of modern routers greatly expand the user's capabilities. You can get statistics on the quality of the connection with the built-in means of Wi-Fi routers, ping and traceroute from a Wi-Fi routerconnecting to a Wi-Fi router, even from a phone wirelessly. How to check the quality of communication with the Internet through a router, and what is ping and tracing.

What is a ping to a site or to an IP from a Wi-Fi router?

Ping utility, which can be run on Windows and Linux systems using the command line, shows statistics (packet travel time to / from specified IP and percentage of loss packages, i.e. units of information lost on the road). This utility can be run both on a computer and on some routers, especially if it is not possible to use a computer.

What do we need for verification?

Have tablet, phone (smartphone) with Wi-Fi and internet browser. Then, it takes enter the Wi-Fi router settings. To do this, you need to enter the Internet address bar browser, enter the address 192 .168 .0 .1 or 192 .168 .1 .1. Then you need to enter in the "username" and "password" fields, your own name and password to get into the Wi-Fi router settings. By default, these are usually admin and admin.

We carry out ping from a Wi-Fi router from TP-LINK

For example was taken TP -LINK tl -wr841nd like most routers from this company, it supports the ping and traceroute utilities. In the settings of the router in the "System Tools" tab - "Diagnostic". Opposite "Diagnostic Tool:" choose "Ping" or "Traceroute".
Then in the field "IP Address / Domain Name:" we enter the address of the site with which we will check the connection. You can also change the parameters of the ping utility. "Ping Count:" is the number of packets that will be sent, usually 100. "Ping Packet Size" is the size of the sent packet, the larger it is, the more on the network, the maximum value is 1472. "Ping Timeout" is not that important, you can leave it alone.

To start ping, click the "Start" button.

In the "Diagnostic Results" area, you can observe the result.
The line "Packets: Sent \u003d 100, Received \u003d 100, Lost \u003d 0 (0% loss)", says that 100 packets were sent and 100 packets were received, loss is 0%. And if there are problems with the network, then Lost will be more than 2.

Ping on ASUS Wi-Fi router

Again, not all old ASUS RT router firmwares contain the ability to use network utilities. Therefore, we advise you to update the router's firmware if you cannot find this functionality there.Let's get started.

It is required to enter the address 192 .168 .1 .1 in the address bar of the Internet browser. Then you need to enter "username" and "password" to enter the settings. Usually, if they were not intentionally changed, these are admin and admin. In the window that appears, select "Network tool" from the menu in the "Method" drop-down list, you can select the utility you want to use. In the "Target" field, enter the address of the resource with which you are checking the connection. Go to the "Count" field - the number of packets.
In the window below the parameters, you will see statistics similar to the one we described for TP -LINK.
That's all, ask