How to mount your smartphone to a camera tripod. Tripod Mount Review for iPhone and Android. Cons of sliding mount

And they are amazing, but do not forget about specially designed devices that help to use the full capabilities of the smartphone camera. Most have probably thought of tripods, but they are not the only solution for getting a clearer photo taken with a smartphone camera. In this post I will talk about 10 interesting accessories for mobile cameras that can meet the needs of the most critical photographers in photography.

The Photojojo Lens Series includes four interchangeable lenses (macro, wide-angle, fisheye, and telephoto) that attach to the body with a magnetic ring. By the way, the latter is glued to the phone on a sticky base. The Canon EOS 5D Mark III can be forgotten with Photojojo's Lens Series lenses, according to the manufacturer. The lenses have only one drawback - they are so large that they obscure the built-in flash. Photojojo's Lens Series is priced at $ 49.

The American company Joby offers a versatile tripod that is compatible with most smartphones and tablets on the market. What's more, the universal mount allows this tripod to be used in tandem with different lenses. The cost of the Joby GripTight tripod is $ 20.

3. Steadicam Smoothee

The Steadicam Smoothee stabilization system uses the same materials used in the professional equipment costing more than 60 thousand dollars, which is used in Hollywood for filming the masterpieces of the film industry. Rugged metal construction for stunning photo quality. The Steadicam Smoothee system consists of an elbow-supported grip and smartphone mounts. It should be noted that the device is also compatible with modern tripods, so it can be used as a convenient accessory to any camera. The cost of the stabilization system Steadicam Smoothee is $ 149.

4. Hama Wireless Data Reader

The compact Hama Wireless Data Reader supports the following types of memory cards: SD, SDHC, SDXC, MMC, MMC Plus, as well as MicroSD and RS-MMC. The device can act as a Wi-Fi router, is equipped with a USB port and is intended for use by iPhone smartphones and iPad tablets. The cost of the Hama Wireless Data Reader is about $ 90.

5. iRigMic microphone

IK Multimedia positions the iRigMic as the ideal device for professional sound recording. The microphone features three levels of gain control and a vocal processing software package. The iRigMic is priced at $ 50.

This two-piece cylinder-like device allows you to capture the slow motion effect of panoramic circular videos or capture stunning 360-degree panoramic shots of any location. The Camalapse 3 device acts as a link between a tripod and a GoPro, Contour, Drift or smartphone. Camalapse 3 consists of two parts that can rotate relative to each other. The top is a timer with a tripod screw and the bottom is a tripod screw hole. Camalapse 3 is priced at $ 30.

7. Glif +

The Glif + tripod is designed for use with iPhone smartphones. The device is very small in size, can be carried along with the keys as a key chain, and allows you to take photos and videos with your iPhone from different angles. The Glif + tripod costs $ 30.

This device provides users with the ability to fix their favorite smartphone on a tripod, move to the desired distance and take a picture at the right moment. The iPhone Shutter Remote uses Bluetooth wireless technology to transmit the command. The device allows you to control the camera capabilities of your iPhone smartphone at a distance of 10 meters, and its cost is $ 40.

9. Camera Table Dolly

The Camera Table Dolly has a rigid design and smooth motion throughout the frame. The only drawback is that the Camera Table Dolly requires a perfectly flat surface to work. According to the manufacturer, this drawback is compensated by good quality video recording without sudden jerks when the subject moves. The Camera Table Dolly is priced at $ 90.

The Bikepod turns your bike into a tripod. More precisely, the Bikepod is a tripod that firmly holds the smartphone while the owner pedals his bike. This device is aimed at lovers of cycling and will allow you to capture the most unusual and beautiful landscapes. A tripod with a smartphone that is equipped with a GPS satellite navigation receiver can also be used as a navigator.

Mounts for installing phones and, in particular, iPhones are sold in stores, but why spend money when you can make this mount with your own hands using materials at hand.

How to mount your phone to a photo tripod

If you are a motorist or you have a familiar driver, then you will probably find an unnecessary (if you have not yet thrown away) mount for your phone or navigator on the windshield. These mounts, especially the cheap ones, often break. As a rule, the suction cup stopper breaks, but the phone mount itself with its sliding fixing strips remains intact. To make a do-it-yourself fastener, in addition to a plastic part, you will need two pieces of plywood 4 and 10 mm thick, wood glue and small screws. From the tool, you need a jigsaw or a saw with a fine tooth, means for screwing self-tapping screws, a drill of 1.5 and 5 mm.

1. On a sheet of 10 mm plywood, mark the contours of the future heel of the attachment. The dimensions are taken from the heel of the tripod, but the mount being manufactured will be installed.

2. We outline the dimensions of the platform and stand for installing the phone. The dimensions are determined by the location and the way you choose to install the plastic mount. The Master's Secret will install the plastic mount on the self-tapping screws.

3. Trying on the heel and pad on the tripod. We put marks of their mutual position.

Heel and pad markings Strut markings Alignment marks

4. Using a clamp, glue the heel and pad.

5. We outline two holes for self-tapping screws for installing the stand from the mount. We drill with a thin drill ~ 1.5 mm a hole in the platform and in the rack. They must be made in a rack so that it does not crack. At the entry point of the conical head, we make a chamfer so that the head does not protrude from the back of the platform.

6. Glue and fasten the stand.

7. If desired, a corner can be provided for solidity, but the rigidity of the rack will be enough without it.

8. The photo below shows an example of installing a rotating mount on a rack. The assembly is neatly disassembled. Two balls and two ratchet springs are placed in a separate place. A hole is drilled in the wooden stand to assemble the rotation unit. The rotation unit is attached to the rack with three short self-tapping screws.

9. Springs and balls are placed in their original places. The plastic mount is pressed. The fixing screw is screwed through the drilled hole.

The mount is ready. Compared to purchased ones, the mount is much easier, since the heel is already included in the mount and installation on a tripod consists only in fixing the mount lever.

This mount is designed to be attached to selfies on mobile phone tripods (iPhone, Android, Windows). Such a fastener consists of a lower plastic part and an upper iron bracket - a spring clip.

The lower part has a standard 1/4 "tripod mount that you can use to screw this mount to the tripod. Also on the inside there is a soft foam insert that holds the smartphone and prevents it from slipping out.

The upper part can be extended and, thanks to the built-in springs, can hold a mobile phone. In the upper part there is a rubber insert, which is necessary in order to move the clip apart, and its second function is to prevent the clamped smartphone from being scratched or slipping. There are screws in the plastic tubes below that hold the springs and the sliding mechanism.

We were able to see several color options for such a mount in Selfishop, but the most popular is black with a metal insert.

How to secure your iPhone to this selfie mount

This mount fits all iPhones, we've tested from iPhone 2 to iPhone 6. It even fits the largest iPhone 6 to date at 5.7 ", and that's the maximum phone size it can fit.

Samsung Android Smartphone Models

All Samsung models that are smaller than 5.7 "fit well in this mount. For example, Samsung Galaxy 2. Models with a large screen such as the Samsung Note with force can of course fit in if you try, but the design is clearly not designed for this size.

Other smartphone models

All models with a screen smaller than 6 "are ideal. For large screens, Selfishop recommends other mounts, such as silicone or special sliding for large models.

Pros of a sliding layer of mass fastening

• Simple robust design
• Holds the phone well
• Quickly install or remove your phone
• Does not spoil the surface thanks to soft inserts.
• Not high price
• Suitable for most popular smartphone models

Cons of sliding mount

• The plastic at the bottom may crack during transportation or heavy load
• Not suitable for large smartphones (6 "screen)

conclusions

Simple, comfortable and compact design. If you have a smartphone from 3.5 "to 5", then this mount will suit you well. The mount can be broken if you put it in the back pocket of your jeans and accidentally sit on it. But if you do not treat it barbarously, then take it, it does its job The phone does not scratch, you can twist it at any angle, I never jumped out. In terms of size, this mount fits well for the entire iPhone line, as well as for other smartphones with a screen size less than 6 ".