home » Goods and services » Which Wi-Fi router should I choose for Beeline home Internet? Express loan for PTS How to set up a router for Beeline

Which Wi-Fi router should I choose for Beeline home Internet? Express loan for PTS How to set up a router for Beeline

Setting up a Beeline Wi-Fi router does not have to be done by a specialized technician. If you follow certain rules, you can configure it yourself, which will take you no more than 10-15 minutes.

Wi-Fi router - specifics of device settings

The most popular models of modern routers include D-Link, Asus, Zyxel, as well as TP-Link, which work with the Beeline provider. Internet setup of the router of these models is quite simple and will not take you much time and effort.

Setting up an Internet connection on routers consists of several steps:

connecting the router to the PC;
login to the setup system;
setting optimal router configurations;
connecting additional router capabilities;
saving parameters.

Depending on the selected device model, the process of setting up and connecting to the Internet may differ. Let's look at the process of setting up individual router models step by step.

If you have previously made changes or you have changed your login parameters and cannot remember them, you need to return the device settings to their defaults.

To do this, you need to hold down the “reset” button, which is located near the device’s power cable, for 5 seconds.

When you log in for the first time, you will be greeted by a quick configuration wizard that will help you quickly select the optimal settings for your router.

If you want to figure out the router settings yourself, you don’t have to use the automatic setup wizard. To do this, you need to immediately select the second group of the main menu “Manual Settings”.

Setting up the Beeline DIR-300 router - features and tips for proper connection

The D-Link DIR-300 Wi-Fi router is the most common Wi-Fi router model with a stylish, modern design. The model is designed for 24-hour operation and provides round-the-clock connection to high-speed Internet.

The technical features of the router of this model include:

Wi-Fi connection type - 802.11b/g/n;
data transfer speed - up to 300 Mb/sec;
number of built-in antennas - 2;
available connectors - 4 x RJ-45 (LAN), 1 x RJ-45 (WAN);
Dimensions - 126.5 mm/180 mm/32 mm.

The first thing you need to do when setting up a router is to connect the provider cable and establish a connection with your personal computer. In addition, it would be a good idea to check your device for viruses by scanning it with an anti-virus program installed on your computer.

The next step is to enter the settings system.

To open the settings window you need:

enter the standard IP address of the router into the browser line, which is 192.168.0.1;
when prompted to log in, enter your login and password, which, according to the standard device settings, is provided as the following parameters: login - admin, password - admin (these parameters can be found on the router box);
In the future, you can change these values at your own discretion.

After entering the menu, you will be offered several categories of working with the router: manual setup, setup wizard, checking the connection with a PC, setting up IPTV, setting up Wi-Fi and others.

Manually setting up the Beeline DIR-300 router requires entering all the configurations necessary for connection and normal operation of the device. After entering the “Manual Configuration” menu, you must select the “Network” tab, in which specify the “L2Tp + Dynamic IP” parameters as the connection type. In this menu you can also specify the connection name, login and password of your Beeline Internet. In the line “VPN Address” we indicate the standard address of the Beeline server - tp.internet.beeline.ru. After saving the specified settings, you will be able to see the created connection in the “WAN Connections” tab.

The next step in configuring the DIR-300 router is to configure the created connection. The main settings are setting a password for the connection, as well as setting the name of the access point.

After successfully entering the specified parameters, the installation of the Internet connection will be completed, and the router will be completely ready for use.

Wi-Fi routers from Beeline - key points and features of setting up different models

For owners of Beeline routers, setting up the Internet should not cause problems. The provider tried to make it as simple and fast as possible. The Beeline Wi-Fi router is configured according to the same type of scheme, indicating the standard provider data.

Standard values for connection connection:

WAN connection type - L2TP;
the user name is equal to the provider's payment number;
password - standard value set by the provider (admin);
VPN server parameters - tp.internet.beeline.ru.

However, each router model has its own characteristics, and therefore, the process of setting up devices may have slight differences.

Key points for configuring Asus router settings

One of the popular modern routers is Asus. Thanks to the efforts of the provider, setting up the Asus Beeline router has acquired an automatic process of searching for the most optimal configurations, thanks to a convenient settings wizard program.

As a rule, upon completion of work, the configuration wizard sets all the settings independently, but often it may be necessary to configure it manually. Therefore, it is necessary to know the key points of this process. Let's look at the features of setting up the Beeline router with standard firmware 3.0.0.x.

After connecting the Internet cable to the computer (the Internet cable is in the blue port, the Patchcort is in the yellow port), you need to connect the other end of the Patchcord to the PC’s network card, and also check that the settings of the card itself are correct. After successful connection, log in to the router. To do this, you must enter the value of the provider's IP address (192.168.1.1) in the browser line. After entering the standard login and password values, you will have access to the device settings menu.

In the “Internet” section, you must enter the standard data for connecting the connection provided by your provider.

Unlike routers of other models, the Asus router requires setting up a dynamic address, which is a distinctive feature of this device.

To obtain dynamic IP address parameters you need:

open the “Internet Settings” tab in the router settings;
check the “Enable connection” checkbox;
select “INTERNET” type, “IP Routing” service type, “DHCP” addressing.
save the specified settings.

TP-Link router - what you need to know for proper connection

Another popular router model is TP-Link. This router is a practical model of a budget device with support for 3G and Wi-Fi 802.11n with the support of the Beeline provider.

Setting up a TP-Link router — This is a fairly simple process that won't take you much time. The TP-Link router is in many ways similar to the Zyxel Keenetic router, therefore, the configuration process has similar parameters.

You can use a special automatic configuration wizard, which will automatically determine and set the optimal router parameters for connecting to the network. The manual process uses standard data provided by the provider.

TP-Link and Zyxel Keenetic routers - distinctive points

An important point in setting up Zyxel Keenetic is the L2TP connection. If in the case of the TP-Link router we can say that the procedure is mostly performed automatically, then in the case of the Zyxel Keenetic it is best to enter the data manually without using the Beeline settings wizard. Setting up a Zyxel Keenetic router involves creating two separate connections - Dynamic IP and a VPN connection.

The first connection is standard and is necessary for the operator's internal network. To configure the second one you need:

go to the VPN menu tab;
check the box next to “Enable L2TP LAC”;
in the “LNS address” field you need to enter the Beeline server name - tp.internet.beeline.ru.

In the lines below with the value “PPP Username” and “PPP Password”, enter the values you have chosen for authorization. Make sure Connection Mode is set to Auto. Don't forget to save the specified configurations.

"Beeline" - setting up a router and installing special features

A Wi-Fi router can be an excellent option for connecting high-speed Internet at home, as well as high-quality digital television IPTV.

To set up IPTV on your router you need:

go to the “IPTV Service” section;
check the box next to “IPTV Enable”;
select from the list of Lan Interface ports the port to which TV4 will be connected;
set the connection type to “Bridge Mode”;
set the value “4” in the “802.1P” field;
save settings.

Firmware for Beeline router yourself

Based on the features of the installed Beeline firmware, setting up the router may include various additional parameters.

Additional firmware for the device can help eliminate some malfunctions and operational errors, as well as expand its capabilities. In order to change the standard firmware, you need:

download the updated firmware version;
connect the device to the computer;
enter the settings panel;
open the “Maintenance” tab;
select “Software Update”;
select the file for firmware (downloaded software version);
click the “Update” button and wait for the update to complete;
check the settings, connect the provider cable.

Setting up a Beeline WiFi router does not have to be done by a specialized technician. If you follow certain rules, you can configure it yourself, which will take you no more than 10-15 minutes.

Many users have a question - how to set up a D-Link Dir Wi-Fi router for Beeline? After reading these instructions, you will be able to configure your router to work with the Beeline Internet provider. Setup will not take more than 10 minutes.

Beeline Internet provider uses L2tp connection type, which reduces the load on serving equipment, unlike PPoE or PPTP connections.

Before we begin setting up the Dlink router itself, we will need to correctly configure the network card of our personal computer. Setting up a network card for Windows Xp, Windows 7, Windows 8 takes a few simple steps (it is advisable to update the firmware to the latest version. The current firmware version is indicated on the sticker located on the bottom of the router)

Setting up a network card:

Let's go to " Start", select from the drop-down list " Control Panel"/Click on the shortcut " Network connections»
Next, you should click on “ Local network connection"/select " Internet protocols TCP/IP» /« Properties"/Remove the "tick" from the phrase that ends with the word "automatically"

Next, go to “Start”/Control Panel/Network and Internet Center, Network and Sharing Center/select “Change adapter settings”
Click on “Local Area Connection”/select “Properties”/select “Internet Protocols Version 4 (TCP/IPv4)”.
Place the checkboxes as indicated in the image

We connect our router to the network card

To connect, you must insert the network cable of the Beeline Internet provider into the “Internet” port, which is located on the back panel of the router. We connect the cable that came with our device to any of the “LAN” ports (rear panel), and the other end to the network card of our personal computer.

After we have connected the device to the PC, we should enter its settings. To do this, open your Internet browser (Mozilla, Opera, Chrome, etc.) and enter the IP address of our router in the address bar of the browser: 192.168.0.1, after which an authorization pop-up window will appear on the screen. In the login and password field you should enter the word “ admin" and press the Enter button.

Click on the link “Advanced settings”/“WAN”
On the page that opens, enter our data to connect to the Beeline Internet (login and password are specified in the contract)
Next, select the connection type “ L2TP + Dynamic IP»
Enter “VPN server address” - tp.internet.beeline.ru
After entering all the data, click on the “Change” button

SettingsWi-Fi for the D-Link router Deer for the Internet provider Beeline

Click on the “Advanced settings” link again
Click on the Wi-Fi link
Select the menu item “Basic settings”
Configure “SSID” (the name of your Wi-Fi network - enter any)
Click on the “Change” button
Go to “Security Settings”, where you should set a password for your new Wi-Fi network.

To set up IPTV, you will need to read the article, which you will find by following the link.

The setup has been completed successfully. Now you know how to set up a D-Link Dir Wi-Fi router for Beeline.

Video settings of the D-Link Dir router for Beeline

You can connect to Beeline Home Internet at any convenient time via wire and Wi-Fi at an address in Moscow. Fill out the form on the website, indicate the street, house, apartment and find out if the provider works at the address of your home. If there is a coverage area at your address, you can connect the very next day. Connection masters work from 7 am to 10 pm. For connection details, see the Beeline website or call to contact the operator.

Why Beeline?

Services are available to any categories of users. Choice of tariffs. It is possible to connect WI-FI and access the Internet from different devices. Many additional services: free blocking during departure, convenient payment methods (including “autopayment”), parental control, 24-hour technical support, trust payment, etc.

Which type to choose: WI-FI or wired?

When connecting, you need to determine your own preferences. WI-FI allows you to access the network from different devices simultaneously (computer, laptop, tablet, etc.). When connecting to WI-FI, we offer the latest generation router for just one ruble. It supports internet speeds up to 1 Gbps.

What connection technologies does the Beeline provider use?

The provider uses fiber optic communications. These are Fiber-to-the-building technologies. The use of FTTB does not require additional equipment along the cable route. In this case, the signal is supplied at a speed of 100 Mbit or more.

How long will it take to connect?

You can connect to Beeline Home Internet within 24 hours! If there are available masters - today! Leave a request to connect. Specialists will come at the time you choose. This is possible as early as the next day. You choose the time yourself. Our technicians will carry out the connection quickly and carefully. They will not cause you any inconvenience or unnecessary trouble.

What to do if you need an urgent connection?

If you urgently need to connect a telephone connection, the Internet or digital television, leave a request. Indicate when you will be there and we will do everything as quickly as possible. Beeline always goes to meet its clients.

Every user would like to receive the best services and use the Internet at the highest possible speed. But not all important nuances and details in this matter depend solely on the provider. It can only provide the basic connection conditions specified in the service contract. The subscribers themselves must take care of the rest. And not the least important place in ensuring communication quality is occupied by the Beeline home Internet router.

Incorrectly selected equipment can reduce the capabilities of users who have paid for even the most expensive, and therefore high-quality and high-speed tariff plans.

But how to choose the right technology so that not a single Mbit is wasted? What should you pay attention to and which model should you prefer? It is almost impossible to answer the questions posed without preparation. But, if you thoroughly study the information on the topic mentioned and consult with experts, it turns out that finding the optimal solution is not as difficult as it initially seems.

The main criterion for choosing the right router is the device’s compatibility with the Beeline network. Without meeting this requirement, its use will be impossible, and the purchase of the device itself will become useless. In addition to the mentioned condition, you need to think about:

the desired Wi-Fi distribution speed and channel width;
permissible number of connected devices;
device interface, presence of a USB port;
operating frequency range;
size and appearance of the equipment;
individual technical characteristics.

In this case, the most important, in addition to compatibility, of the listed selection criteria is the speed of information transfer. It is this factor that determines the loading time of sites and portals, the use of virtual services, watching videos and the quality of video games.

The least significant thing is the appearance of the equipment. It affects the visual impressions and the organic arrangement of equipment in the house. The design does not affect the reliability of the device in any way, so it is the last thing you should pay attention to.

You should not deliberately ignore Beeline's offer. The provider offers customers a wide selection of equipment that can satisfy the needs of most subscribers. You can get acquainted with the range of equipment available for purchase in the telephone company’s communication stores and on the official portal of the cellular operator. In the second case you will need:

visit the site;
switch to the “phones and gadgets” section;
Select from the suggested options a tab related to television and the Internet;
switch to the subsection dedicated to routers.

It features more than ten devices, including special sockets and signal amplifiers. At the same time, the equipment offered by the operator is produced by three companies:

TP-Link;
Alcatel;
the last option is Beeline wifi routers.

Branded devices have the greatest variety. Routers differ in models, appearance, color and operating parameters. But the final choice in any case remains with the user, who must personally decide which option will be the most convenient.

Recommended routers for home Internet Beeline

The list of devices distributed by the operator coincides with the list of recommended equipment, since the equipment available for sale is already synchronized with the services of the mobile company and tested by Beeline specialists. The main advantage of using it is convenience. Subscribers will not have to think about setting up and preparing their purchase for use. It is enough to connect and turn on the device for it to start working correctly.

You should not ignore third-party equipment models that are not available in the official store of the mobile operator, but are popular among ordinary customers.

So, before making a final decision, it is worth studying several models:

Asus;
Zyxel.

Perhaps their characteristics will be more attractive, and the price will be more favorable. The main thing is to consult with the store’s employees before purchasing and make sure that the selected model is compatible with Beeline home Internet, and that no unexpected difficulties will arise after the purchase.

Which Wi-Fi router is better to choose?

When choosing a Beeline wifi router for home Internet, it is important to consider every little detail so that the final connection parameters are optimal. Thus, the devices present in the provider’s stores make you seriously think about the connection speed. They allow you to support traffic distribution up to 1000 Mbit/s. The minimum available value will be 50 Mbit/s.

It is worth taking a closer look at the individual features of each model you like. For example, Smart box Pro is equipped with four LAN connectors at once. But ZTE is compact and reliable in any conditions. In addition, it has a SIM card slot, which allows you to take the device with you and use it anywhere where the subscriber needs access to the worldwide network.

It is important to emphasize that there is no unequivocally bad or ideal equipment. Each model has its own advantages and disadvantages. Therefore, in order to make the best decision, you should focus on your own preferences and needs. Only in this way will the equipment be as useful as possible, and operation will be convenient.

Where can I buy it?

If the user does not intend to use third-party devices and intends to use the branded stores of the mobile operator, it is worth:

log in to your personal account;
go to the page with a list of products;
buy the one you like;
get the equipment at your nearest communication store.

The list of retail outlets of the network is presented on the official website, so finding the right salon will not cause any difficulties for users.

It is worth adding that the cost of equipment varies from 2500 to 3900 rubles. Moreover, the indicated price includes not only the device chosen by the client, but also the tariff plan.

Choosing an alternative tariff or refusing a SIM card can change the cost. More detailed information can be obtained by contacting the contact center consultants. They will not only tell you about current prices, but also explain how to make a purchase and describe the main characteristics of the selected equipment.

Price for routers

The price range for devices established on the official portal of the provider has already been mentioned above. The most expensive is Smart box Pro Black, which provides customers with maximum data transfer speeds.

The cheapest Beeline Wi-Fi router is Smart box One. Its cost is 2500 rubles. For the specified amount, speeds of up to 100 Mbit/s are offered. The only cheaper option than this model is the TP-Link Re200 White signal amplifier, which requires payment of 2,190 rubles.

It is important to add that most of the equipment presented on the portal is valued at 3,290 rubles. Considering that in most cases the price turns out to be the same, it is impossible to call it the determining factor that you should focus on when choosing the optimal connection option.

Conclusion

To summarize, it is necessary to emphasize that it is not the model of the equipment you like or the quality of the signal that is decisive, but the user’s opinion. When choosing equipment, it is worth remembering the situations in which the devices will be used, the conditions for connecting to the Internet and the desires of the subscriber. In case of doubts or difficulties, it is advisable to consult with call center operators or managers working in communication shops. Only in this way will the quality of the services provided by the provider be maximum.

Many providers provide network access, but Beeline is considered one of the popular options. The company provides mobile 4G Internet or home connection. You can set up a connection through a proprietary modem or a router from another company to get Wi-Fi coverage. Configuration may vary depending on device model.

Setting up a router for Beeline

When using several computers at home, the task of setting up Wi-Fi becomes urgent. Wireless Internet is especially convenient if you have modern smartphones, tablets or laptops. Setting up Beeline through a router can be done automatically or manually, it depends on the device model. As a rule, when a contract is concluded, a master comes home to help create a connection. If the Wi-Fi installation was carried out later, or the device was replaced, then you will have to set up the connection again.

For each device there are instructions for setting parameters for proper operation, but there are points that are the same for each case. Eg:

connect the wire (cable) to the router;
connect the device via the second wire to the computer;
Configure the device (enter the Beeline router address, set the connection type, set a password and connection security).

There are several popular models of devices that are used by most customers. Few people take options without Wi-Fi, because, as a rule, the device is purchased for it. Setting up a Beeline dir router occurs in two stages: physical connection, managing the connection through the browser. First, you should make sure that your network card has the latest firmware. This applies more to owners of older computer models. The configuration is then carried out as follows:

Unpack the device, connect the power supply and cord to the connector labeled “WAN”. Connect the second cord to one of the additional inputs and connect it to the computer.
Next, set up the connection in the Start menu. Go to “Control Panel”, here click on “Network and Sharing Center...”. Click Adapter Settings. Set the line to Internet Protocol Version 4, then click “Properties”.
Make sure that items with automatic issuance of IP and DNS servers are active.
Next you need to go to the internal interface. To do this, in any browser, enter “192.168.1.1” into the site address field. A form for entering your login/password will be displayed to log into the admin panel. To go inside, you must enter the word “Admin” in both fields. These are factory access options, if they do not fit, it means they have been changed. You can reset the values by holding down the Reset button on the device. You should hold it for about 10 seconds.
When you log into the back-end interface, select “Configure manually.” Next, go to the “Network” tab, click “Add”.
Select the connection type - L2TP, dynamic IP.
Enter your Beeline-issued login and password into the appropriate fields.
Check the boxes next to “Keep Alive” and “Connect automatically”. Click "Save".
Click “Save” again. Next, an automatic connection will occur. To find out if the network is working properly, just go to any website from your phone.

Setting up an Asus Beeline router

Another popular device manufacturer is Asus. There is no program on the disk to automatically connect to the network, so you will have to do everything manually. You need to configure the Asus Beeline router as follows:

Connect the device to power, network and computer.
Open your browser, write 192.168.1.1 in the site address bar, press enter.
To access, enter the password and login “admin”.
In the internal interface, click on the “Advanced Settings” tab, select “Wan”. Next, specify the following data: “Connection Type” - “L2TP”, “Get the WAN IP automatically” - “Yes”, “Connect to DNS Server automatically” - “Yes”, “VPN Server” - “tp.internet.beeline. ru". In the login/password fields, indicate the access granted by your provider.
To turn on Wi-Fi, go to the “Network Map” item.
A table will appear on the right for quick wireless connection configuration. You need to configure it as follows: “Wireless name” - specify/create a name for your home network, “Security level” - “WPA-Auto-Personal”, “WPA Encryption” - “TKIP+AES”. On the “WPA-PSK key” line, write the Wi-Fi password. Click the “Apply” button.

Setting up a TP-Link router for Beeline

This is a popular model due to the presence of an installation wizard that is able to connect to the network independently. As a rule, a disk on which the program is located is sold along with the device. You just need to connect the router to your computer, insert the CD and launch the application. If the connection does not open, you need to do everything yourself. Setting up a TP-Link router for Beeline is carried out as follows:

After connecting the device, go to the browser, type in “192.168.1.1”, press “Enter”. Enter the login/password “admin”
Open the “Network” tab and the “WAN” item.
Specify the connection type “L2TP”, enter the login/password issued by your provider (Beeline), IP server – “tp.internet.beeline.ru”.
Specify automatic connection (“Connect Automatically”), MTU size – 1400. Click on the “Save” button.
To enable the Wi-Fi network, go to the “Wireless” section and click on “Wireless Settings”.
Come up with a name for the network, specify the region “Russia”, channel and mode – “automatic”. Click the “Save” button.
Next, go again to the “Wireless” section, click on “Wireless Security”.
Here, activate the “WPA-PSK/WPA2-PSK” item, then set everything to “automatic” mode. Create a password for the connection and click “Save”.

Setting up a Zyxel Keenetic router for Beeline

Some users prefer Zyxel. The physical connection of the router is carried out in the same way (a wire to the WAN connector and a second one to the computer’s network card). The intranet setup of the Beeline keenetic router is as follows:

Type 192.168.1.1 in your browser.
Enter “admin” as your login/password.
Go to the “Internet” section, click on “Connection”.
Specify the following values in order: think of any name for the Internet center, set IP settings and DNS retrieval to automatic, check the box to respond to ping requests and enable UPnP. Click on "Apply".
Next you need the “Authorization” tab. Do not check the first box, the protocol should be L2TP, the server address should be tp.internet.beeline.ru, write down the login and password in the given access lines. Save your changes.
To activate Wi-Fi, open the “Wi-Fi Network” section, the “Connection” section.
Check the box to enable the access point. Come up with a network name, the SSID field should be left blank, the standard is 802.11g/n. The next two items should be in “auto-select” mode, then leave everything as is. Click on “Apply”.
Go to the "Security" tab. Set authentication to WPA-PSK/WPA2-PSK, security type to TKIP/AES, format to ASCII. Create and write a password for access. Click "Apply".

sovets.net

Connecting and setting up a router from Beeline

Beeline's most advanced WiFi router is SmartBox ONE, which is a multifunctional device and is used to connect home Internet and digital television services. You will have to pay only 2500 rubles for the device. If there is no wired Internet, you can use the ZTE MF90 4G router.

Benefits of using a router

The latest model of wireless equipment from the Beeline operator is equipped with a more powerful signal transmitter, which also now operates in two bands - 2.4 GHz and 5 GHz, which allows you not to worry about the fact that some device will not be able to connect to the Internet. The advanced processor ensures maximum reliability of the Wi-Fi signal throughout the entire area of the apartment or house.

The device has the following advantages:

802.11n standard, supported by most devices;
maximum transmission speed – 300 Mbit/s;
Digital TV connection supported;
modern design that does not spoil the interior;
convenient interface for setting up the Internet.

The 4G router provides network access at speeds of up to 74 Mbit/s. The kit includes a SIM card that allows you to use 30 GB of Internet per month. The subscription fee is 1200 rubles. At night there is an unlimited connection to the 4G network.

Read also how to connect a Beeline modem and what to do if the Internet does not work.

Connecting and setting up a 4G/WiFi router

Connecting the router is very simple - you just need to connect the power cable to the Power connector, and the Internet cable brought into the apartment needs to be plugged into the WAN port. To connect the device to the network, you also need to connect the computer to the device by plugging the cable into any of the LAN connectors. The 4G router connects to the computer via a USB connector.

The setup is as follows:

After all the lights on the device light up, you need to open any Internet browser on your computer and go to 192.168.1.1. The welcome page of the interface will open.
To access Quick Setup, you must enter your username and password in the appropriate fields. The standard setting assumes the name admin and the same password. After this, you need to click the “Continue” button.
The main menu will open. Inexperienced users are advised to go through the quick setup procedure. If you know what to do, then you can go to the advanced settings menu.
Quick setup consists of four points:
- Home Internet. Here you can connect your equipment to the Beeline network. The device’s firmware already contains all the necessary network parameters; all that remains is to enter the already familiar username and password.
- WiFi network – this item allows you to set parameters for accessing the wireless network. Here you need to enter the name of the network, which will be displayed in the connection menu on the devices used, as well as the password to enter the network. The password must be at least 8 characters long.
- Guest network – settings for guest Internet access are entered here.
- TV – here you just need to select the LAN port to which the IPTV set-top box will be connected, if available.
You need to click the “Save” button and let the router connect to the network. This should take no more than a minute.

When the router establishes a connection, the message “Internet connected” will appear in the “Status” line. This completes the setup and you can use the wireless network.

Setting up a 4G router is done in the same way.

Software update

The operation of the device is ensured by its firmware, which should be updated in a timely manner to prevent problems with the functioning of the router. The firmware must be updated carefully, and if something goes wrong, you will have to restore the device to a service center.

The latest version of the software is downloaded from the official website.
In the browser you need to open page 192.168.1.1.
You can enter the menu by entering your login and password (the standard setting is admin in both fields).
You should go to the advanced settings menu.
At the top of the page you need to select “Others”.
A list of settings will appear on the left, in which you need to select “Software Update”. At this point you need to select the address on the computer where the downloaded firmware is located.
Click the “Update” button and do not touch anything else so as not to disrupt the setup process.
After a few minutes, the router will automatically reboot and be ready for use.

The 4G router firmware is not updated.

Read also how to flash Bilay Smart-2 and how to flash a modem.

Home » Devices » Connecting and setting up a router from Beeline

beelinegid.ru

Before connecting to the Beeline router, you need to configure the network card of your computer’s operating system.

Let's consider this action using the example of setup on the most popular OS.

We set the IP address. To do this, go to “Start”, then go to the “Control Panel” section and select “Network Connections”.

Right-click on the “Local Area Connection” section of this menu - select “properties” from the drop-down menu, click on “Internet Protocols TCP/IP” and select “properties” again.

Check the boxes where the word “Automatic” appears and save the changes.

After completing these steps, you can begin connecting the Beeline router.

Return to menu

We begin work with authorization. Open the browser, enter the request 192.168.0.1 in the address bar, now a page with data entry will open. Enter - admin in both lines, this data is standard for everyone. You can change them later if you wish.

Now the settings page will become available to you; it is better to give preference to selecting the function manually. To enter the desired menu, click on the “Advanced settings” link.

On the page that appears, select “WAN”.

The following sections must be completed:

connection type - L2TP Dynamic IP;

user - the login that was created for you when you connected to the Beeline Internet, it will definitely be in your contract;
password - the password that was created for you when connecting to the Beeline Internet must also be in the agreement;
VPN server address - write the following: tp.internet.beeline.ru.

Then you need to click the “Change” button.

Go to the “Advanced Settings” section again, select WI-FI - then “Basic Settings”. In the “SSID” line, enter the name of your Wi-Fi network and click “Change”.

Note! If you want to password protect your network, returning to the previous menu, click on “Security Settings”. Opposite the “authentication” section, enter WPA-PSK2, “key” - your own password. (This is the most common security connection and will help you protect your network from hacking and unauthorized use of the Internet.)

Return to menu

To configure a tp-link router for Beeline, you should enter your choice of one of the addresses - 192.168.0.1 or tplinklogin.net in the address bar. An authorization field will appear, the standard login/password is admin/admin. After logging in, you will be taken to the settings page.

Select the Network section, and in it the item - WAN.

On the page that opens, opposite the line “WAN (Connection Type), you need to select L2TP/Russia L2TP, in the “user name” and “password” fields, enter the data specified when connecting to the Beeline Internet.

Then in Server IP Address/Name enter tp.internet.beeline.ru. Be sure to check the box next to Connect automatically. Save your changes.

After this, the Wi-Fi network will be available for you to use.

Return to menu

The first connection to the router, you can use a cable or configure it via Wi-Fi wireless connection. The network address will be default - 192.168.1.1

Open Beeline Smart Box.

On this page you need to click on the “Continue” button, this will help you get to the authorization section.

Before installing the Beeline Smart Box router, click on the “Quick Setup” clickable button, after which a window will appear containing all the basic connection parameters.

In the field opposite the “Login” line, you must enter the contract number concluded with the provider, “Password”.

If you have lost the data required for authorization, contact the Beeline service center - after confirming your identity, the operator will give you the necessary information.

After completing all these steps, click “Save”, and immediately click “Reboot”.

The router is connected, you can start setting up your Wi-Fi network. To do this, you need to go to Smart Box.

Select the section “Advanced settings”, which will allow us to go to the Smart Box expert settings. Click on the “Wi-Fi” section, in the menu of which we select the first item – “Basic parameters”.

To increase network security, the “Authentication” line should be set to “WPA-PSK”.

If you plan to use the port for programs and games, you need to forward it - open it. We return to the Beeline Smart Box interface again.

Select the “Advanced settings” section and go to the expert settings. Next is the menu, it’s at the top, you should select a section in it such as “Others”. In this section there is a “NAT” item, in the menu of which you need to select “Application Support”.

In the menu that opens, select “Set user service”.

On the page that opens, in the “Name” field, you need to enter the name of the application that you are going to use through the port. Next comes the “Type” line - selecting the transport protocol.

Depending on the parameters recommended for the application, you need to select TCP or UDP, or both. After this, you need to fill in the “Start port”, “End port” - fill in the data for the range of ports of the application you selected.

If after completing all the steps the port remains not working, it may be blocked by an antivirus. Try disabling your computer's security system for a while - if the port opens, then all the settings are correct.

How to set up Beline Internet (beeline) on D-link, TP-link routers

geek-nose.com

Setting up a Beeline Wi-Fi router

Let's configure a Wi-Fi router to work on the Beeline Internet provider network using the Netgear WNR-612 v2 as an example. The settings are identical for most router models, so you can configure your device based on this article. Below you will find a video on setting up this router model. And in the second part of the article there is a brief guide to setting up the D-Link DIR300.

First, you need to connect the Beeline Internet cable to the WAN (INTERNET) port, and the patch cord connecting the Netgear router to the computer’s network card to any of the LAN ports. Power supply into the outlet :) Next, launch the browser (Internet explorer, google chrome, opera, mozilla) and enter the address of our Netgear Wi-Fi router into the address bar. Next, you will need to enter your username and password to enter its settings.

The router address can be found on the back of the device: routerlogin.net

Username: admin
Password: password

Basic Beeline settings for any router model:

Connection type: PPTP, preferably L2TP if available.
VPN address (access point, server address):
tp.internet.beeline.ru - for connecting via L2TP protocol.
vpn.internet.beeline.ru - for connecting via PPTP protocol.

09/19/12 - I decided to edit the article in order to write what will happen in this video that makes it worth watching:

1. Basic settings for connecting a Wi-Fi router to the Internet: - selecting an access point for connecting Beeline, - filling in the basic parameters for connection, 2. Setting up a home Wi-Fi network in the Netgear WNR612 router: - coming up with a name and key for the wireless network, - selecting a Wi-Fi connection mode 3. Protecting your Netgear router from hacking, changing the login password. 4. Setting up IP-TV in a Neatgear Wi-Fi router without using a router

Part two. Setting up a D-Link DIR 300 router for Beeline.

Connecting the router is done in exactly the same way as when setting up Netgear, the switching process is described in the first part of this article.

Now you need to go into the router firmware. To do this you need to enter the following data:

router address - 192.168.1.1
login to access the interface - admin
password - admin

If you get to the quick setup page from Beeline, then you only need to perform a few sequential steps to configure the router.

1. “Home Internet” - in this section you need to configure the connection to the network, all the data necessary for the connection is already in the router’s firmware, all that remains is to enter the login and password for Internet access in the appropriate fields. 2. “Wi-Fi” - here you need to configure the router’s wireless network. In the Network Name line, enter a name, for example, wifi_free, and in the Password field, you need to enter a password (come up with a password of 8 characters, for example, a phone number without the eight).

3. “Television” - if you are a subscriber to the “Digital Television” service, you need to select the router port to which you connected the set-top box. If you watch TV channels on a computer, select “Yes” in the “Television on PC” menu. 4. “Access to the router” - here you need to change the password to access the router. Next, click the "Save" button to apply the router settings.

The router will automatically connect to the Internet after a reboot, and the “Connection established” option will appear opposite the Connection Status field. This completes the setup of DIR300 with Beeline firmware.

GoodTarif.ru

Connecting a personal computer to the router's Wi-Fi network

Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop body (if available) to the appropriate position or press the key combination on the keyboard. On most laptops, this is the combination Fn + one of the keys in the F row (the number of the key depends on the laptop manufacturer; you can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.

Click “Start” -> “Network Connections”. If there is no “Network Connections” item, open the “Control Panel” and go to “Network Connections”.

In the window that appears, double-click on the “Wireless Network Connection” icon.

In the list of networks, select the network you want to connect to. If the network list is empty, click Refresh Network List. Modern routers are capable of creating two networks: If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend choosing it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the “Connect” button (or simply double-click on the name of the desired network).

If you are connecting to a protected Wi-Fi network, a window will appear asking for the network key (password) and confirming it. Enter your password and click “Connect”.

Click "Connect Networks".

In the list of networks that appears, select your router's wireless network. Modern routers are capable of creating two networks:
- at 2.4 GHz - a widespread but noisy frequency
- at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
If your computer sees a network operating at 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the “Connect” button.

Click the “Network key or passphrase will be entered” button.

Enter the password for your Wi-Fi network, then click the “Connect” button.

Click the "Close" button. You have successfully connected to your wireless network and can work with Home Internet from Beeline.

Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop body (if available) to the appropriate position or press the key combination on the keyboard. On most laptops, this is a combination of the Fn keys + one of the keys in the F row (the number of the key depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.

Click the Start button and select Control Panel.

In the Network and Internet section, select View network status and tasks.

Select "Change adapter settings."

In the list of connections that appears, select “Wireless Connection.” It must be enabled. If the connection status is “Disabled”, right-click on it and select “Enable”. Now double-click on the wireless connection icon with the left mouse button and select your router’s wireless network from the list of networks that appears. Modern routers are capable of creating two networks:
- at 2.4 GHz - a widespread but noisy frequency
- at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
If your computer sees a network operating at 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the "Connect" button.

Enter the password for your wireless network, click OK.

You have successfully connected to your wireless network and can work with Home Internet from Beeline.

Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop body (if available) to the appropriate position or press the key combination on the keyboard. On most laptops, this is a combination of the Fn keys + one of the keys in the F row (the number of the key depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.

If you have the Windows Start screen open, go to the standard desktop.

Move your mouse pointer to the bottom right corner of the screen and then up. Click the "Options" icon.

Click on the wireless network icon.

In the list of connections that appears, select your router's wireless network. Modern routers are capable of creating two networks:
- at 2.4 GHz - a widespread but noisy frequency
- at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
If your computer sees a network operating at 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network. To automatically connect later, check the “Connect automatically” checkbox. Click the "Connect" button.

Enter the password for your wireless network. Click "Next".

You have successfully connected to your wireless network and can work with Home Internet from Beeline.

Make sure the Wi-Fi interface is turned on. The Wi-Fi icon in the menu bar should be bright and underneath it should say “Wi-Fi: On” or “Wi-Fi: Searching for networks.” If the Wi-Fi interface is turned off, turn it on in the Wi-Fi menu.

After the Wi-Fi interface is turned on, find and select your network from the list of available connections. Modern routers are capable of creating two networks:
- at 2.4 GHz - a widespread but noisy frequency
- at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
If your computer sees a network operating at 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX).