“For a long time” or “for a long time”: writing. Office installation takes a long time If your Internet connection is slow, use the offline Office installer

The part of speech “for a long time” is an unchangeable adverb that has the meaning of time. If you turn to a spelling dictionary, you can find out that the word is spelled together. It means "for a long time." We use it when we want to find out about the long passage of time in a process. There is nothing difficult about remembering how to correctly use these two adverbs in writing.

"For a long time" or "for a long time"?

The word “for a long time” is dependent on the predicate verb; it answers questions of circumstance. But if we have the adverb “long” with the prefix “on”, then we can confidently say that the preposition refers to another word; in any case, it is a noun. Then we can rearrange them, replace them with synonyms, remove them from sentences.

Writing an adverb

"For a long time" or "for a long time"? How do you spell? Separate and continuous writing of adverbs is almost not regulated by the rules of the Russian language, and therefore causes difficulties in writing for many. The writing of this part of speech should rather be memorized. There is one of the rules that states that an adverb formed by combining a prefix with another adverb is written together. Therefore, it is correct to use the “for a long time” option.

Answering the question of “for a long time” or “for a long time,” we can say that in addition to the fact that this word is written together, it is also permissible to write it separately. We have the right to do this if we have the preposition “on” and the adverb “long”. You can insert any other words or phrases between them. You can remove one thing, but the essence of the proposal will not change.

Example sentences

Let us give examples of combined and separate spelling of this adverb.

Continuous writing:

  1. My father went on an expedition for a long time.
  2. His house was empty because he was away for a long time.
  3. Rainy days have settled for a long time in our city.
  4. I like to turn off my phone for a long time and enjoy life.
  5. We have been planning to go to Turkey for a long time.
  6. If you are leaving for a long time, do not forget to turn off the water and gas.
  7. I abandoned my studies for a long time because I considered it a stupid activity.
  8. The weather forecast predicted drought for a long time.
  9. I'm going to go to bed for a long time.
  10. The school was quarantined for a long time due to the large number of absentees.

Separate writing:

  1. My favorite band's long-awaited album featured a cactus. (In this example, we separated the preposition and the adverb by inserting the qualifying adverb “so” between them).
  2. On the long-awaited album of my favorite band... (In this example, the adverb “long” refers to the participle “awaited”).
  3. My favorite band's album featured a geometric pattern (The adverb "long" was removed, and the preposition "on" refers to the noun "album").

Literary example:

"Immerse yourself in your heart for a long time!

Lock it with your diligent hand

And throw away the unnecessary keys!"

This is a poem written by N. A. Nekrasov.

"For a long time" or "for a long time"? What is the easiest way to remember spelling?

To do this, you should learn simple rules and apply them in practice. After this simple action, the spelling of adverbs “for a long time” or “for a long time” will be remembered with ease. After all, combined and separate use in writing is not regulated by the usual rules, as for other parts of speech, so contradictions and questions arise. But you need to remember that there are only two spelling options.

There is a rule on writing adverbs, which is definitely worth remembering: if an adverb is formed by adding a second one, then we write it together. As in the spelling of the word "for a long time." And if we have the preposition “on” with the adverb “long”, then we always write separately. Indeed, in this case, we can easily insert a combination between these words or even remove one, and the meaning of the sentence will not be distorted. And only logic and an understanding of the structure of the sentence will help us determine whether it is worth writing the adverbs “for a long time” or “for a long time” together or in some other way.

Hello dear friends! This weekend I came across a computer on which I needed to install Windows 7. But a problem appeared that I encountered for the first time. When I started the installation of Windows 7, the installation window did not appear (first window, language selection). And then the seven took a very long time to install. If you have the same problem when Windows 7 takes a long time to install, And The installation window does not appear, then now I will write how to solve this. At least I’ll tell you how I solved this problem.

I'll probably start from the beginning. They called me and asked me to come and look at the computer, otherwise: the Internet does not work (Intertelecom there), the antivirus always shows some window, nothing starts, etc. In short, a complete set of all sorts of different breakdowns. And I’ve already dealt with this computer, such a powerful “machine”, new, only Windows XP is installed on it, not that it’s bad, it just surprised me. And when I asked the owners why Windows XP was installed, they said that they installed it in the store. I said that it wouldn’t be a bad idea to set it to seven, after all, it’s newer, and on the same hardware.

I came a second time, turned it on, and there was something incomprehensible there. Perhaps it was a virus that worked this way, or maybe it was children :), but Avast threw in some kind of warning, there were almost no icons on the notification panel, the Internet did not react in any way to an attempt to open a connection, the theme was changed, and it was not possible to return to the standard one. And many more different unpleasant moments.

I looked and decided that it would be easier to demolish everything, format the C and . After explaining everything to the owner of the computer, we decided that we would do just that.

Everything is fine, the computer rebooted and booted from the installation disk. The file loading bar appeared when installing Windows 7, and when the language selection window should appear, nothing happened. The window did not appear, there was only a splash screen (well, the same as when installing seven) and a cursor. I waited about three minutes and restarted the computer. I realized that something was wrong. I decided to go into the BIOS again and look at the settings. Now it’s clear why the store installed Windows XP; most likely, installing Windows 7 failed.

I eliminated the problems with my installation disk immediately, I have installed it more than once. Yes, and I had an exact copy, with which the Windows 7 installation window also did not appear. I didn't see anything strange in the BIOS, and... It did not help, Windows 7 was not installed, the language selection window did not appear. I decided to open the system unit and see how and what is connected there. I didn't see anything interesting there. A hard drive and an optical drive were connected via the SATA interface.

I tried to run the installation again. I launched everything the same, only the background, but there is no window with a choice of language. I decided to wait. About 5 minutes later a window appeared with a choice of language, well, at least it’s something, I thought. Clicked next and the message appeared “Starting installation...”, and that's it. The computer was “thinking”, I understood this from the fact that the cursor was spinning (something was loading), I decided to wait a little.

About 10 minutes later a window appeared in which I selected a clean installation of the system, again waited 5 minutes, formatted the partition for Windows 7 and began copying files. They took longer to copy than they should have, it seemed to me. In short, with grief in half, I installed Windows 7. Then I realized what a long installation of Windows 7 was :).

Slow but established

The computer worked as expected from such hardware, very quickly. All that remains is to configure it. But I didn’t have a driver for the modem, so they decided to take the system unit to me and pick it up the next day.

Finding reasons for slow Windows 7 installation

At home, I set everything up, and decided to torture the computer a little more and find out why it was taking so long to install Windows 7, I was interested. Moreover, I did not find a specific answer to this question on the Internet, only guesses.

Setting up a SATA hard drive in BIOS

To begin with, I opened the system unit and changed the hard drive and drive connections. I connected the hard drive from SATA 0 to SATA 1. And the CD/DVD drive is in SATA 3.

Then I went into the BIOS again. I was interested in the SATA controller settings. Chapter .

Against OnChip SATA Controller the parameter was Enabled. Okay, then we see the item, I have the Native IDE option. This is not very good for a SATA hard drive, as it will not show all its capabilities.

I changed the parameter value to AHCI (the best option for SATA drives). I tried to turn on the computer. The drive was not detected at all, and as soon as Windows 7 started loading, the blue screen flashed and the computer rebooted.

I decided to put RAID in the parameter instead of AHCI (combines disks into an array), nothing worked (I knew it was useless, but decided to try), everything is the same as with AHCI.

Installed it back Native IDE. All these experiments did not help. Although it is very strange why AHCI did not work, I never understood it.

Disable Drive A

I also saw that opposite the Drive A table there was a parameter “1.44MB, 3.5”. This is a disk drive, and this computer does not have one. So I set it to “None” to tell the system that it is missing.

I saved the settings by pressing F10. I installed the installation disk with Windows 7 and tried to run the installation again to check how the seven would install, just as slowly or faster.

And to my surprise, everything worked as expected, a window quickly appeared with a choice of language and so on, I quickly got to formatting the disk. Of course, I didn’t format it, since the computer was already set up and should have been picked up by now.

How to solve the problem of slow installation of Windows 7?

Let's summarize, otherwise I've scribbled a lot of text :). There was a problem with installing Windows 7, it took a very long time to install, and I had to wait a lot until the window with the choice of language appeared, and then “Starting installation...” hung for a long time.. If you have such a problem, then you can just wait and everything will be installed. I have it installed.

If you want to try to solve this problem, then:

  1. Try setting AHCI next to the item in the BIOS (most likely it didn’t help me).
  2. Change SATA connectors for the hard drive and drive.
  3. Disable Drive A (disk drive).

I did the last two steps, and the installation of Windows 7 went quickly. I can’t say with 100% certainty that this is what helped restore the normal installation speed of Windows 7. But in any case, you need to try.

Sorry that there was so much text, I just wanted to describe everything in as much detail as possible. I hope that my experience was useful to you, if you managed to solve this problem, in this or some other way, write about it in the comments, it will be interesting and useful. Good luck friends!

If you receive an error message "Sorry, your connection speed is too slow..." If Office takes too long to install or freezes during installation, try reversing the process and try the solutions below.

Try the solutions below

Are you installing Office on Mac? In this case, follow the instructions from the article Uninstall Office for Mac and restart your Office installation.

If you're installing Office on a Windows computer (desktop, laptop, or combination device), try these solutions in the order listed.

1. Office installation stops at 90%

If your Office installation stops working at 90% as shown below, it may be because the Windows Installer is busy. For a possible solution, see the article Office installation stops at 90%.

2. Restart your computer and check if Office applications are installed

Office installation may have completed. After your computer restarts, follow the steps in this article Find Office apps in Windows 10, Windows 8 and Windows 7 to see if you have Office applications installed.

3. Use a wired connection

If Office installation fails, try switching to a wired connection and try again. This can speed up the process since a wired connection is usually faster than a wireless one. After that start installing Office again.

4. If your Internet connection is slow, use the Office offline installer

The Office offline installer can help you bypass proxy, firewall, antivirus, and Internet connection issues that you might encounter when installing Office.

For instructions on installing the standalone version of Office, see Using the Office offline installer(open the appropriate tab for your version of Office).

If Office still won't install, try one of the following solutions.

5. Temporarily disable your antivirus program

To find out how to disable your antivirus program, go to the manufacturer's website. Also, uninstalling your antivirus program may help. Be sure to reinstall it after installing Office, or enable it if you disabled it.

If you don't know which antivirus program you are using, you can find its name in Control Panel by following the instructions below.

Advice: Windows Defender Antivirus comes with Windows 10. If it turns out that you are using it, click the button Begin, select Options > Update and Security, and then select Windows Defender on the left. Set the switch to position Off Don't forget later turn on his.

Virus protection.

If Windows detects an antivirus program, you will see it in the list Virus protection.

If Windows detects an antivirus program, you will see it in the list Virus protection.

6. Internet recovery using Control Panel

    Open Control Panel and select Programs and components.

    In the window Uninstalling or changing a program Select the Office product you want to install from the list.

    Click the button Change(or tap it) and then select Network recovery.

7. Uninstall and reinstall Office

Completely uninstall Office using the easy fix, and then install the suite of applications again.

Advice: Do you have an HP 4500 or HP 8500 OfficeJet printer and are trying to install Office? In this case, stop installing Office before installing Office again. print spooler service.