Refresh leather tablet case. DIY leather case for a tablet. Master Class. What you need to create a cover

In the modern world, a case for a tablet is no longer just any regular accessory - it is a necessity for every conscious owner who wants to extend the life of his device. Undoubtedly, the production of touch devices is now on the rise, many manufacturers such as Asus, Huawei, Lenovo are doing their best to improve the design of tablets and make it more rigid. But, alas, no tablet is protected from accidental drops, bumps, scratches and abrasions.

Briefly about the main

While the companies are increasing the production of covers for tablets, on the Internet in various forums and simply in the comments under the product, whole battles of supporters and opponents of protective accessories are unfolding. Until now, none of the disputes has reached their logical end, a tablet case is an individual thing that is chosen based on their own beliefs and interests.

Few users decide to make an accessory with their own hands - this opens up incredible possibilities of a flight of imagination for them. Other owners of small 7 inch tablets prefer to carry them in their pants, bag or jacket pocket. Still, a larger percentage of users find extra money and buy protective covers for tablets. After all, the bulk of the tablets are large 10-inch tablets, which you just can't wear with you: weight makes itself felt over time.

Overview of the most popular accessories

As a rule, everything is learned in comparison, which allows you to identify the strengths and weaknesses of this or that accessory. To analyze their capabilities and features, what exactly they were released for, and so on. Previously, they did not attach much importance to such an accessory: whether it is or not, it does not matter, but the world is not worth it, but is constantly in motion and user requests are constantly changing. Therefore, covers for a tablet can be conditionally divided into several main groups:

• Tablet bag;
• Cover plate;
• Tablet case in the form of a book;
• A complete accessory with a keyboard.

Cover plate

This is most likely one of the simplest yet versatile pill accessories. Unfortunately, making it with your own hands will not work. After all, Asus, Samsung, Huawei, Apple devices have a complex external shape and it will not work to fit your own cover to them.

The design of this accessory is quite simple - it is put on the back of the device and protects the case itself from unwanted scratches or abrasions. This leaves the front panel unprotected, as shown in the image above. Such a case for a tablet does not give the device a high degree of protection: a direct hit to a 7 or 10 inch screen and a trip to the service center is guaranteed.

Cover with front protection

A logical continuation of the aforementioned accessory has become a very convenient case with full protection from all sides. This model became very popular after the release of the first 7-inch Nexus co-produced by Asus and Google.

Such a model has very good functionality, firstly, it completely closes the tablet from external influences, and secondly, a magnet is very often put in the upper part - this allows you to use the tablet case as a stand in various configurations.

It is worth noting that some manufacturers have gone further and supply only the top cover in the form of a cover - it looks quite original and modern.

It is quite difficult to make such a cover with your own hands, so it is easier to buy, and you will definitely not regret your choice. Asus is constantly releasing new covers for the tablet, so choosing an interesting model for your 7 or 10 inch device will not be difficult.

Book accessory

This tablet case is very common among owners due to its simple design and ease of use. This accessory has a good degree of protection, and the universal shape allows it to be used for both 7 and 10 inch tablets.

The tablet is fastened using a fastening system:

• Rubber;
• Metal;
• Special frame.

But the upper part of the cover can be attached using a wide elastic band along the entire length of the cover or special rivets.

But, the main advantage of such accessories is their transformation into a very convenient stand, as you can see above in the image, for the device from Asus. As you can see, the mount for the device itself is located along the entire perimeter of the case, which does not allow the device to accidentally slip out of it.

The top cover can be attached either to special fasteners or with the help of Velcro or a magnet. These tablet cases have won the love of millions of touch device owners around the world. Undoubtedly, making such a stand with your own hands at home is possible, but it will not be convenient for transportation.

The tablet bag is also not deprived of popularity, like the previously reviewed case. This model is an excellent solution for the safe transport of the tablet on weekdays. Plus, such a cover allows, in addition to a tablet, to store various documents or small things.

This solution is perfect for devices from Asus, which is rapidly introducing 10-inch transformers in the lives of ordinary customers. It is worth noting that transformers are the future of computer technology: simplicity and lightness of tablets, power and versatility of laptops.

Today, there are a huge number of a wide variety of models on the market, so absolutely any owner can choose a worthwhile option for himself. A tablet bag is exactly what every modern user needs. Although such a case also has its drawbacks: the device is protected as long as it is directly in the bag.

Accessory with keyboard

While Asus is promoting the idea of \u200b\u200btransformers, many users still prefer conventional tablets, because they are several times cheaper. Without thinking twice, manufacturers began to produce separate, miniature keyboards for 7 or 10 inch and combined them with protective accessories.

Convenient, practical, and most importantly, not as expensive as transformers from Asus for the average buyer. The keyboard cover for the tablet can replace the owner on the road - a full-fledged laptop. Plus, the gadget has additional features:

• Touch screen;
• Mobile 3G Internet;
• Dimensions and, of course, light weight.

Those who have already managed to buy an Asus device are offered the above presented tablet cover - it looks, of course, ridiculous, but it completely protects it from any physical influences. Trying to do something like this with your own hands will most likely fail - a complex design will make itself felt.

Multifunctional covers

Recently, the concept of a cover for a tablet has taken on completely different meanings, and absolutely any thing that can not only protect a 7 or 10 inch gadget, but also prolong or expand its work acts in its role.

Battery accessory

Undoubtedly, a very interesting specimen that HP produces for its ElitePad 900 10 "tablet. Such a case for the tablet compensates for the lack of an HDMI and USB connector, and also allows you to install an additional battery yourself.

The operating time is plus 20 hours to the already available stock on the tablet itself. The accessory also provides convenient access to the micro SD slot and good sound in various operating modes. Such covers for the tablet are produced individually and in extremely limited quantities.

A much more interesting piece is a case with installed solar panels, which are capable of accumulating charge and giving it to the device. A great option for long hikes or walks, and additional compartments allow you to take the necessary trifles with you.

As you can see, manufacturers of protective accessories surprise with their imagination, because every year a huge variety of models for 7, 8 and 10 inch devices are released on the world market.

Be very careful when using this type of accessories, because the covers require additional conditions of maintenance and use - read the instructions.

Modern society does not stand still, but is constantly in motion, so the previously reviewed tablet cases are suitable for people who lead a calm rhythm of life. But what should extremals, tourists, or just people who lead an active lifestyle do?

A very convenient and practical solution, many backpacks are equipped with an abundance of pockets by default, but only a few of them are adapted for safely storing tablets. The interior decoration has a pleasant texture that does not harm the touch device. The main disadvantage of this solution is that you have to constantly get the tablet out of the backpack.

This backpack model is ideal for tourists who have been away from civilization for a long time, but at the same time do not limit themselves in access to touch devices. Competent inner sewing allows you to conveniently place the devices throughout the backpack. Two USB cables for charging small equipment: a player, a smartphone and one for charging a tablet. Making such a backpack with your own hands is quite possible, but chaos is definitely guaranteed for you.

Futuristic idea

Fans of Apple products do not surprise with their imagination; at the moment, funds are being collected for the release of a kangaroo backpack. This tablet bag is worn from the front and allows you to interact with the tablet on the go.

The gadget is fixed on a special structure, which excludes the possibility of accidental loss or even theft. Now, long waiting in a queue or a trip on public transport can be smoothed out by working on a tablet. Moreover, the developer has endowed the bag with five modes at once:

• Camera mode;
• Game;
• Walking;
• Video mode;
• Tablet mode.

It looks, of course, a little wild and unusual, but if everything works out, perhaps the bags will become incredibly popular all over the world. Moreover, turning the bag over on the back - it becomes an ordinary backpack for everyday use.

Accessory at home

If many hours of searching did not give the expected results, then the only correct solution is to make a case with your own hands. In principle, if you do not pretend to be some kind of functional accessory, but want to make an ordinary protective case, then this can be done at home.

Toolkit preparation

To make a cover, we need:

• Waste cardboard box;
• Regular and aerosol glue;
• Standard sewing kit of thread, needles, scissors;
• Fabric with the ornament you like;
• Elastic.

Blank

We cut out blanks for the cover from the cardboard box, that is, we put the device and trace it along the contour, which correspond to the length and width of the tablet, as well as the thickness, as shown above in the image.

Preparing the fabric

Now we put the blanks on the fabric and draw the dimensions along the contour, make a small indent for the future seam. We cut off two of these shreds of fabric, iron them with an iron and proceed to the direct sewing of the accessory.

Cover making

We sew the fabric blank along the perimeter, only leaving one side unstitched - this is necessary in order to insert cardboard there. We turn the fabric to the front side.

Sewing the product

Now we spray the cardboard with aerosol glue and put it in an unsewn hole, the smaller cardboard blank can be thrown out - it is not needed. Smooth the fabric around the entire perimeter to make it smooth and wrinkle-free.

Almost ready

We tuck the fabric near the side that is not hemmed and glue it to the cardboard base. We also glue a tie made of the same fabric so that you can connect both covers without any problems and ensure the safety of the device.

It remains only to glue the mounts for the tablet itself: first, we put the device approximately in the center, mark where the elastic bands are supposed to be placed.

Tablet mounts

Please note that they must be tight enough to securely hold the device without making it difficult to remove. We glue it, and now, to hide it, you can cut out another small piece of fabric and stick it on the inside of the accessory.

As a result, we get a very simple, but original and interesting hand-made case. This design can be the envy of the most eminent manufacturers. In the choice of fabric, design and other things - no one limits you, fantasy and a little free time - work wonders. Asus with its branded accessories can stand aside and breathe nervously.

Small master class

No one will now deny that computer peripherals are gaining popularity in the world every day. Tablet devices are designed to make our life more interesting, easier, and also help in many difficult tasks. However, tablets need to be handled with care and sometimes break from drops and bumps. What if there is no money for a case? You can make your own tablet case. It's actually quite simple, you don't need to have any special knowledge, everyone can handle it!

Original accessories at home

Brief information on creating covers

So, you are interested in the question of how to create a tablet case yourself, without resorting to buying it. Also, it is likely that you are asking yourself the following question: "Is it possible to make a cover at home, or is it fundamentally impossible?" It should be noted here that this thing can not only be done, but, if desired, even bypass the beauty and originality of factory products of this kind! And if you connect your own imagination to everything else and show creativity in the process of work, then all your friends will envy you at all, because they will definitely not have such a cover!

Notepad case

What you need to create a cover

In fact, making a cover is by no means a difficult task, everyone can handle it, you just need time, a little effort, and, of course, desire. If you are a creative person, then you will most likely be able to make not only a convenient accessory, but also just a beautiful thing that will delight the eye every day. So what does it take to create?

1. Colored felt (it should be cut based on the specific dimensions of your touch gadget);
2. Glue;
3. Elastic band (used to fix the tablet inside the case);
4. Button;
5. Two pieces of cardboard (also cut out based on the size of the tablet).

Manufacturing process

Many users, not having felt at home, and not knowing where to get it, immediately abandon the creation of a cover.

Please note that the felt can be replaced with any other fabric, even leather / leatherette is suitable here!

Do not give up, almost any fabric will do for this purpose. Use what you have at your fingertips.

Bonding cardboard to fabric

First, glue the material you have taken with the pieces of cardboard, then make sure there is some distance between the cardboard pieces. While the glue is still fresh, check this; the distance is necessary, first of all, so that the cover can be closed. In other words, at this stage, you should have something like a book.

Homemade Tablet Protective Accessory

Work on the inside

Gently glue the corners

The next step is to glue the leather strips from the bottom. Their dimensions should be as follows: 15 cm in length; 1 cm wide. Two such strips must be carefully divided into two parts with scissors, and then glued with glue to the corners of the created protective accessory.

At this stage, it is imperative to check whether your tablet fits in a case or not. If everything is fine, we glue the two fixing elastic bands in the way that suits you best. Cut out another piece of fabric (leather), then glue it into the inside, so that the uncovered cardboard is completely hidden from view. In the end, of course, you need to flash everything, because the glue can easily come off at the most inopportune moment.

It remains to hide the cardboard

Cover clasp

The most interesting moment in the creation of the cover is its clasp. We take Velcro, as well as a piece of leather / fabric. Now you need to glue it all in such a way that there is Velcro on one side and fabric on the other. Be sure to sew all this (for a fastening element, it is necessary to sew especially reliably and soundly).

Protective iPad accessory

To make it a little easier for you, you can take a purchased branded phone case as a sample, and make a similar one, but only on an enlarged scale. It all depends solely on the imagination of the resourceful user; if you have a desire to experiment, and at the same time there is no money for a branded tablet case - then get to work!

You should not limit yourself to one single case, because there are other options and ways to please your tablet with reliable protection. So, another type of "home cover".

What should be the result

What do you need

1. An unnecessary book, the dimensions of which slightly exceed the dimensions of the tablet device for which the cover is sewn;
2. Glue;
3. Brush;
4. Any heavy object;
5. Ruler;
6. Stationery knife.

Page markup and deletion

The process begins by glueing the edges of the book. After completing this, you need to let the book dry, leaving it for an hour or better, even two hours. Having opened the book, mark the notch with a ruler (take the dimensions of your tablet device as a basis), cut out all the pages. Find a fabric that is more beautiful, so that it matches the style of your gadget, carefully stick it on. Do not forget that before attaching the fastener, you need to allow the fabric you have just glued to dry.

Get creative

Create original solutions

Don't be afraid to improvise! Do not forget that you are doing all this exclusively for yourself, and therefore no one can prevent you from diluting the standard process with your original ideas. For example, using foam rubber in the inside of the tablet, you can ensure that your case is also shockproof.

Do not hesitate to decorate your case as you like it, use any items and decorations available for this purpose. Among other things, you can sew something in the style of a clutch bag, do not forget to take into account the dimensions of your touch device. At the same time, you can take virtually any fabric - when creating an accessory for yourself, no one can forbid you to experiment with a wide variety of fabrics and fabrics.

Features of fasteners

Choose the right fastener type

As for the fasteners, you can make them very different, and if for some reason you do not like Velcro, then you can think about it in advance, and already at the first stage of the cover sewing, paste magnets into the base of your future cover, in general , it all depends solely on your imagination and resourcefulness.

So, while creating this accessory, improvise! Of course, many will say that it is easier to buy a ready-made case in a store, but, in any case, a thing created with your own hands will help save money on something else (which you cannot do yourself). In addition, your case will attract attention, and you will undoubtedly be proud of the fact that no one else in the world has exactly the same case as yours. This is an idea for creative people looking for creative solutions. Develop your own abilities in terms of creating unusual things, and never stop there!

Making a case for your tablet

Recently, tablets have become very popular. They greatly simplify our life, as well as make it more convenient and interesting. But, unfortunately, tablets are often scratched, which spoils their appearance. Therefore, it is so important to use tablet cases. However, not everyone has the opportunity to purchase a suitable cover. There is a way out of this situation. You can make yourself a tablet case yourself. What do you need to have with you and how to make a case for a tablet with your own hands? This is what we will discuss in detail with you.

If you still don't know how you can make your own tablet case. Or maybe you don't even know if this is possible? We'll tell you right away that such things can be done not only with your own hands, but their appearance will be no worse, and maybe even better than purchased covers. In addition, you can use all your efforts, include maximum imagination and take into account your preferences. All this taken together will help you achieve a wonderful original result. And now let's move on to our do-it-yourself tablet case.

How to sew a tablet case

To sew a book case for an iPad or Samsung tablet yourself, you actually need to have a little free time and put a little effort. It goes without saying that you have the opportunity to create a real masterpiece, which, in addition to its direct purposes, will also “please your eye”. And yet, what is needed in order to sew an original case for a tablet? Below is the 1st version of the handmade cover.

Before starting work, prepare:

• felt (colored). Cut it out according to the dimensions of your tablet;
• button;
• 2 cartons. Cut also to fit your tablet;
• elastic. To fix the tablet in the case
• glue;
• we proceed directly to work.

Before you sew a tablet case on your own, let us draw your attention to the fact that if you do not have felt in stock, then you can replace it with another suitable fabric. It can even be leather or leather substitutes. In general, you can use whatever you want. Now let's get down to the work plan.
Glue a piece of leather or other material of your choice on each cardboard. Make sure that there is a small distance between these cardboard boxes. This is necessary so that you can easily close the cover in the future. That is, make a cover for the tablet like a book.

We sew a cover for our tablet ourselves

Next, take the edges of the remaining fabric and wrap them inward. Now glue them to the cardboard. Glue the leather strips underneath. They should be 15 cm long and 1 cm wide. Cut these two strips into two even parts and attach them to the corners of the future cover with glue.

We sew a cover with our own hands

It is important to check how to "fit" your tablet. Then glue 2 rubber bands to fix the tablet. The main work is over.

Then, cut out a small piece of leather (or fabric) that will be slightly smaller than the tablet in size. Glue it inside. This is done in order to hide the cardboard, that is, to make the cover look beautiful. Sew all this carefully so that nothing comes out and does not come off.

In the end, all that remains is to make a fastener for the cover. You will need a small piece of leather or cloth and some Velcro. On the one hand, you need to glue a piece of leather (fabric), and on the other - Velcro. This way you can easily close your case. Carefully sew it all from above. This will solidify the result. It's all. Now you know how to sew a case for your tablet.

As you can see for yourself, there is nothing difficult here. And making a case for your tablet yourself is easy!

You can take a regular phone case as a sample. And then, using your imagination, make a similar model, but in slightly larger sizes.

Original tablet case

Each person can sew an original tablet case with their own hands. But it remains important how he will do it. We will not dwell on one option. We will show you another way to sew an original tablet case.

This method may surprise many, but, in any case, it is a great solution.

To work you will need the following items:

• an unnecessary old book (it should be slightly larger than your tablet);
• brush;
• ruler;
• glue;
• knife (clerical);
• any heavy object.

Let's take a closer look at how to make a tablet case or case from an old book. After choosing a suitable book, glue the edges of the book. Then leave this book for about 1-2 hours. This is done to allow the glue to dry completely. Now, take a ruler, open your book, and mark the dimensions of the notch (to match your tablet). After that, cut out the pages.

All the work has already been done. Your tablet case is ready.

DIY tablet case

You can make a case for a tablet yourself using the first method, but add some original ideas. For example, you can place foam rubber on the outside between cardboard and fabric. This will make the case much softer.

You can decorate the cover with the help of various materials at hand. Alternatively, you can sew a cover in the form of a clutch bag, but only take into account the size of your tablet. Regarding the fabrics, you can choose any you like, depending on your wishes and preferences.

And to put it another way, there are no restrictions in creating a case for your tablet. You can even independently come up with some interesting way of how to create a handbag for your iPad with your own hands. And maybe this method will exceed all your expectations, and will be very popular.

Note that the clasps for iPad cases also vary. You can use Velcro or magnets. But, in the second option, you will need to glue magnets inside at the beginning of work. They will fix the 2 sides of the case when you close it. You can also find out from us about furniture with your own hands.

Nowadays, you can find a variety of accessories and supplies that will help you in any job. But, the created case for the tablet with your own hands will all the time attract the people around you. And, you can be completely sure that you will not see a similar case anywhere else. Such an author's creation will be much more valuable than a regular case bought in a store. I wish you creative achievements and success. Never stop at what you have achieved.

Video on how to make a case on an iPad

Who can argue with the fact that a handmade gift is more pleasant, sweeter and much more expensive than any most valuable gift purchased in a store? Take the risk? Well, okay! At least in our family, everyone is very fond of giving and receiving homemade gifts.

So in the light of the upcoming men's holiday, February 23, I would venture to give all creative mothers and grandmothers the idea of \u200b\u200ba homemade gift for a man - a leather case for a tablet. Moreover, we have already given our dear men a leather case-keychain for keys and a case for a mobile phone made by ourselves. Why not swing at the tablet case ?!

How to sew a leather case for a tablet with your own hands

Tools and materials for making a tablet case:

• leather;
• thick cardboard;
• foamed polyethylene 1 mm thick;
• non-slip dense fabric (I have "wet" silk);
• transparent glue "Moment Crystal";
• needle;
• scissors;
• transparent packaging plastic;
• ruler;
• simple pencil;
• ball pen;
• a bar of soap or crayon;
• awl;
• reinforced sewing thread;
• shoe thread;
• lurex thread;
• elastic band 1 cm wide - 50 cm;
• elastic band 2 cm wide - 25 cm.

1. I take measurements of the tablet.

Based on the measurements, I make a frame for a tablet case. To do this, I cut out 2 identical parts from thick cardboard, exceeding the dimensions of the tablet by 3 mm on each side. At the same time, I round off the two outer corners of the part, like the rounded corners of the tablet itself.

2. So that the case for the tablet can be transformed into a convenient stand, one of the cardboard parts is conventionally divided into two identical parts.

I leave the half with rounded corners unchanged, and I separate a strip of 0.5 cm from the second half, which I then cut off, so that as a result I get 2 unequal parts: with rounded corners - wider, even - narrower.

3. I glue all three cardboard parts onto transparent plastic packaging using Moment Crystal transparent glue.

Reinforcing cardboard parts with plastic helps to make the frame of the tablet case more rigid and resistant to deformation.

4. After the glue dries, I cut off the excess plastic along the contour of the cardboard parts.

5. I lay the ironed fabric on the work table with the wrong side up.

Alternately, I glue the prepared parts of the cover frame to it with the plastic side up in the following order:

and). I glue the largest part so that its rounded corners are on the left side.

b). In order to evenly stick the remaining parts of the frame relative to the first, using a ruler and a piece of soap, I mark on the fabric: I draw two parallel horizontal lines of the upper and lower borders of the cover.

at). Having retreated 2 cm from the first glued part of the cover frame, I draw a vertical line.

I glue a narrow part of the frame without rounded corners, aligning its left edge with the drawn vertical line.

d). I step back from the second glued part 0.5 cm and again perform vertical marking with a remnant. I glue the third part of the cover frame, placing it with rounded corners to the right (outward) and aligning its left edge with the vertical marking.

6. I place the workpiece under the press until the glue is completely dry.

Perhaps this is not the best use for colorful gift editions, according to the press they make just a wonderful J

7. Cut off excess fabric, stepping back 1 cm on each side from the edge of the cardboard frame parts.

8. Wrap the edges of the fabric on the wrong side of the frame and glue them.

9. I carefully cut off the excess fabric on the rounded corners of the parts.

10. I place the resulting detail of the inner part of the tablet case on a piece of leather and trace around the contour with a simple pencil.

11. I cut out the leather part of the outer part of the cover according to the markings made.

12. As a small decoration, I decided to make a simple contour embroidery with silver lurex thread on the front side of the case. To do this, I prepare a simple sketch of the contour drawing and transfer it to the skin of the outer part of the tablet case using an awl.

Details on how to transfer a pattern for embroidery to leather, as well as the very technique of embroidery on leather, is described in the step-by-step master class "Horse Embroidery on Leather".

13. Along the contour embossed with an awl, I embroider a drawing with a seam "back to the needle" with lurex thread.

14. To fix the tablet case in the stand position, you must complete the product with a clip with a “tongue”. You can use a piece of rough, thick leather to make it. I didn't find anything like that, so I simply decided to strengthen the piece of leather for the clip with the same transparent packaging plastic. So,

I cut a 7.5x4 cm rectangle out of leather.

15. With sharp manicure scissors I cut a hole with a "tongue" into the clip details. The cut width is about 0.5 cm.

16. I glue the plastic to the seamy side of the clip and cut off its excess along the contour of the leather part.

17. With an awl I pierce a series of holes along the contour of the clip part, 2 mm back from the edge.

18. I sew the contours of the cutout of the part with a thick shoe thread along the markings.

19. On the back side of the folded in the form of a book, I make markings for attaching the clip. The clip should be centered between the top and bottom edge of the cover and 2.5 cm from the side of the cover.

20. I apply a strip of glue along the contour of the seamy side of the clip.

21. I glue the clip detail to a pre-marked place. With an awl I pierce holes in the skin of the outer part of the cover in those places where the holes in the clip have already been made.

22. Sew the clip to the outer part of the tablet case with shoe thread.

Work on the front side of the case is now complete. But the "interior decoration" still needs to be worked on.

23. For reliable protection of my beloved gadget from all kinds of "shocks", I decided to duplicate the frame of the tablet case with thin foam polyethylene.

I cut out three parts from expanded polyethylene, identical to the cardboard parts of the cover frame. Moreover, each polyethylene part is 0.5 cm less on all sides than its cardboard prototype.

24. I glue the expanded polyethylene parts to the seamy side of the cover frame.

25. The role of the clamps that securely hold the tablet in the case will be played by the elastic bands attached to the corners of one of the halves of the case. I prepare four identical pieces of elastic with a width of 1 cm.The length of each piece of elastic is 8 cm.

I attach a small piece of leather bent in half in the center of each piece of elastic. This will prevent the tablet from sliding inside the case.

26. Sew the leather to the elastic.

27. I glue two prepared rubber bands to the outer corners of the widest part of the cover frame.

28. I attach the remaining two elastic bands to the inner corners of the wide frame part, making small cuts in the fabric in the place shown in the photo by the arrow.

29. A wide elastic band, attached at a distance of 1 cm from the side of the wide part of the frame, will further act as a fastener for the tablet case.

30. I glue the outer part of the leather cover to the frame part prepared in this way.

31. Having made a row of holes with an awl along the contour of the tablet cover at a distance of 4 mm from the edge, I sew both parts with strong reinforced sewing thread. I also make the seams separating the three parts of the cover frame.

This is how the tablet case looks from the inside:

Just in case, if after my vague explanations you have a question about the location of the wide elastic band-fastener, in the photo it is on the right (wrapped on the front side).

And this is the front side of the cover:

Here you can clearly see how the "tongue" of the clip should be oriented so that the cover can be folded into the stand.

Well, and, a case for a tablet, transformed into a stand (side view):

And also the view of the cover folded into the stand, from the back:

Despite my sometimes rather unintelligible explanations, the process of making a leather case for a tablet with your own hands is not at all complicated and does not take much time. And if you have any questions, feel free to ask them in the comments to the post.

Give your precious men gifts made with love with your own hands with Hobbymama!

To keep your favorite gadgets presentable for as long as possible, they should be covered with covers. Yes, in some stores their cost is very high, but it is not at all necessary to make such a purchase. You can make a case for a tablet with your own hands from any fabric, even from jeans. You will get a beautiful cover that will keep your favorite gadget for a long time.

Sewing a felt cover for a tablet means beautifully decorating it, because this material has a rather bright color. For such work, you need to prepare the following materials:

• Felt. It is recommended to use contrasting colors.
• Duct tape. Alternatively, it can be replaced with double-sided tape.
• The cloth. Cotton is desirable.
• Scissors and thread.
• Needle.

Sewing instructions:

1. First you need to measure the parameters of the gadget. This is necessary in order to know how much fabric to cut. After that, 2 pieces of the same size are cut out of felt. You should also cut 2 pieces of fabric.
2. The felt and cotton fabrics are now applied face-to-face. On the sewing machine, make an even seam going from top to bottom.
3. Then the seam stitched on the machine should be ironed with an iron. It should be ironed towards the gasket. Now both parts add up, you need to iron them.
4. After that, you need to make a valve for the cover. To do this, a rectangle is cut out of felt, the length of which is no more than 20 cm.It should be folded in half and sewn with a finishing method.
5. Velcro or double-sided tape is attached to the inside of the valve. The part is attached to the cover. The valve must be firmly sewn to the garment, otherwise it will fall off.

Gallery: DIY tablet case (25 photos)

How to make a leather case for a tablet with your own hands?

Sewing a leather case is not difficult, besides, such a product looks very elegant. A homemade leather case is made according to the following scheme:

1. The first step is to measure the gadget. Then you can cut a piece of leather to the desired size. It is important to consider the curly edge. After that, another leather is cut

1. Now the skin should be treated with water. You can use a spray bottle for this.
2. A pattern is made from two blanks. Each piece must be cut according to the original measurements. Use a measuring tape at this stage.
3. To sew patterns, you need to use an awl. With the help of an awl, holes are made at the edges of the blanks through which the thread will be threaded.
4. If the skin is too thick and difficult to pierce with an awl, then it is worth placing the tool perpendicular to the coating and hitting its top with a hammer. Thanks to this maneuver, the awl will pierce the skin.

Tip: To shape the leather cover, it should be moistened with water and put on the gadget.

Fabric tablet cover: how to make?

The fabric cover is the easiest to make. Such a product wears out quickly, but it is easy to replace it with a new one. So, instructions for working on a fabric cover for a tablet:

1. To make a durable fabric cover, you need to use cardboard when creating it. Measurements are taken from the gadget, you need to determine its length and width.
2. Based on the measurements, 3 cardboard pieces are cut out, 2 of which must correspond to them. The central piece of cardboard is the thinnest and is placed in the center between the two large pieces.
3. Now you need to cut the corners of the cardboard blanks so that the cover has rounded edges.
4. The blank is placed on the fabric. The fabric must be cut out, having previously outlined the edges. The action is then repeated to cut another piece of fabric.
5. Two flaps are attached on the seamy side so that the gadget can be inserted into them. That is, one side should not be sewn.
6. After the cover has been placed on the tablet, the non-expired side can be sewn up.
7. If the master has a desire to secure the gadget more firmly in a homemade fabric case, he can attach a loop of tape to the case.

Tablet case

A flip cover is the most practical gadget cover you can make. With it, the tablet can be used as a TV. A book cover is made according to the following scheme:

1. At the first stage, the parameters of the device are measured, or rather, its width and length. After that, 0.5 cm is added to these two indicators for more accurate work.
2. Lightning is taken. A ribbon should be sewn to its edge. The workpiece is still set aside.
3. Now the book is taken. It should be large enough to fit the tablet. Pages are cut from the book.
4. Now the book cover without sheets inside unfolds. An awl should be used to make holes along its edges, retreating from them by 1 cm.
5. Starting from the spine of the book, you need to sew a zipper. For convenience, the zipper is sewn into the center of the product. This makes the tablet easy to reach.
6. Now another zipper with a tape is sewn to the sash.
7. Optionally, you can attach a cardboard leg covered with fabric to the back of the case.

Homemade jeans case for tablets

A jeans case looks very nice. To do it, you need to follow this plan:

1. In addition to old unnecessary jeans, you need to prepare cardboard. You should measure the parameters of the gadget in order to know how much denim material you need for sewing.
2. In order to make your work easier, you can attach the gadget to the cardboard and circle it, clearly marking the top and bottom. After that, you can attach the cut-out cardboard and cut out the denim material. It is necessary to cut it, taking into account 2 cm at the side turns.
3. The denim seam should be in the center of the fold of the future cover.
4. The material can now be folded on the sides. You can use instant glue to hold the denim material together.
5. The outer side of the cover should be well ironed with an iron.
6. You need to attach rubber bands around the edges of the inside of the case so that the tablet is firmly attached to them inside. They are sewn neatly in the center along the 4 edges. At this stage, you need to determine whether the gadget fits well in the product, if not, then it is worth correcting some previously made mistakes.
7. If the gadget fits well in the case, it should be taken out to complete the job. Around the edges of the denim cover you need to sew on a typewriter. If desired, you can use a bright, eye-catching thread for sewing.
8. Also, the line should be made in the places where the case is folded.

How to decorate your tablet case?

A homemade cover can be decorated in different ways. Its design is not necessary, but it will make the thing look much better. So, the main ways to decorate a homemade tablet:

• Sew the edges of the case with a sewing machine.
• Make a creative fastener, for example, use a chain as a fastener.
• Sew buttons of different colors and sizes onto the surface of the cover.
• Decorate the item with satin ribbons.
• Stick on the case stickers with happy wishes to the owner of the gadget, etc.

There are really many ideas for creating homemade gadget cases. With such a product, your favorite tablet will serve its owner much longer, because it will be protected and decorated.