Why buttons don't work on Samsung Galaxy S6. Touch buttons do not work on Samsung Galaxy S6 Samsung Galaxy s6 touch buttons are pressed themselves

Samsung Galaxy phones, especially Samsung Galaxy S3, S4 and S5, are known for their problematic screens. Many users either have a blank screen, a black screen, despite the fact that the phone is fully charged, answering or unidentified dots have stopped on the screen. If you've just bought one of these models and you're thinking, don't worry. In this article, we will tell you the causes of these crashes, how you can get your data back, and how to fix the screens. The most common problem is Samsung's sensor is not working. Let's see how to fix this.

The touch screen of the phone is completely unresponsive to touch. What to do?

Samsung does not manufacture a defective product. But phones are exported long distances around the world. This may affect the operation of the touch screen.

Samsung phones are pretty thin. The touchscreen controllers they use downsize in favor of phone size. This can affect their performance and durability.

There could be several reasons causing the Samsung Galaxy screen problem. Depending on the problem, you can narrow down the causes of the faulty touchscreen.

I. Blank screen

This is a very common problem for all smartphones, not just Samsung Galaxy phones. This is usually caused by the following:

An app or function in your Samsung is frozen, frozen;

There is not enough battery to power the device;

Actual physical damage to the touchscreen.

II. Screen not responding to touch

Screen insensitivity is usually caused by a system glitch, be it software or hardware. The software problem will be easier to fix. Here are some of the reasons for an unresponsive screen:

Problematic third-party application;

Your Samsung Galaxy phone is frozen, frozen;

There is an error in one of the hardware inside the device.

III. Dead pixel

These unknown spots are caused by dead pixels, which were caused by:

Third party application keeps crashing;

Physical damage to the screen in a specific area;

GPU has issues with third party application.

Defect of the manufacturer, in this case, contact the warranty and you will change your phone.

Samsung sensor not working problem or freezing problem can be solved by turning off the phone and turning it back on. Press and hold the power button and volume down button for 7 seconds. The phone will be disconnected. The issue will most likely be resolved after downloading it. If the phone does not respond, remove the cover and remove the battery, then reinsert and turn on the phone.

Remove SIM Card

Shut down your Galaxy and take out the Sim card. Now re-insert the Sim after a few seconds, turn on the phone and see if anything has changed?

Boot Your Phone in Safe Mode

This is another helpful step to get rid of touchscreen issues if it is some third party application causing the problem. Safe Mode temporarily disables all third-party apps, and if you don't encounter an issue in this mode, it must be the third-party app causing this problem.

To boot your phone in safe mode, follow these steps:

1. Turn off the device completely

2.Now press the power button for a few seconds until the Samsung Galaxy logo appears

3. Then release the power key and press the volume down button. The phone will restart.

4. Continue to hold this button until the phone restarts.

5. It will show safe mode in the lower left corner of the phone.

Once you are convinced that these are the third-party apps that are causing this problem, uninstall them by going to Settings\u003e Application\u003e Application Manager\u003e swipe through the downloaded options\u003e select the app you want\u003e Uninstall and finally press OK. If you have a lot of apps, uninstalling them one at a time can take a long time, so you can do a factory reset (explained below).

Clear Phone Cache

Another solution to the problem is to delete the cache. Here's how to do it.

1. Turn off your smartphone completely

2. Press and hold the Home button and Volume Down button, and then press the Power button

3. Continue to hold the buttons, and when the Samsung logo appears, release the power button but hold the Home button and the Volume Down button

4. When you see the Android logo, release the other two buttons

5. The message "Installing system update" appears, and then the recovery screen appears

6. To highlight the "Wipe cache partition" use the volume down key and press the power button to select it.

7. When done, use the Volume Down key again to highlight the Reboot System Now option and select it with the Power button.

Let Your Phone Relax

Samsung Galaxy touchscreen malfunction can be stopped by preventing overload. The phone tends to freeze if it is overloaded with work, unlike other phones that quickly heat up or drain the battery. It just freezes. Most users mistakenly accept the solution to the touchscreen problem, while in reality most of the internal parts of the phone are deadlocked. This can happen if you have been playing games or filming videos for a very long time. Wait for a while before using the phone again.

Subscribe to our website: Kazizilkree

Defective GPU.If you are using your Galaxy for gaming, your graphics processing unit (GPU) may be stretched to its limits. To clear those dead pixels, you need to clear the RAM cache, close all running applications and restart your phone.

Perform a Hard Reset

If you find that all the above steps do not fix the problem - Samsung sensor is not working, try performing a hard reset. It will remove all files and apps from your Galaxy and restore your phone to factory settings. Below are the steps to perform a hard reset:

1. Press the volume up, power and home buttons and hold until you see the Galaxy screen.

2. Now leave the power button, but continue to hold the other two buttons.

3. Release the two buttons when you see the Android recovery screen.

4. Use the volume up and down buttons to highlight options and the power button to select.

5. Select factory reset, which will erase everything from the device and then reboot the system.

Sensor Not Working on Samsung - Hardware Issues

The Samsung Galaxy is relatively new to the market, but there are still many complaints about the Galaxy Touch Screen as many people face such issues. This is definitely very annoying if your touch gives you slow response times or doesn't work at all.

Below are some of the Samsung Galaxy touchscreen issues that its users are experiencing:

Problems:

• Click Stop Application
• Slow response
• On some sections of the screen, the sensor does not work.

Causes of problems:

• The phone cache is almost full.
• Some physical damage has occurred on your display screen that partially or completely disrupted the function of your phone's touchscreen.
• Low charge sometimes also causes a slow sensory response.

Temporary solution:

1. Reset your phone.

2. Remove and reinsert the battery (after shutdown). Be sure to allow a delay of at least 5 seconds before inserting the battery.

The hardware solution for Samsung Galaxy is divided into two sections:

• Touchscreen problem
• Button Touch problem

Touchscreen problem

1. Disconnect the connectors and check the display connectors.

2. Now clean the side connector and the display connector. After cleaning.

3. Re-solder each pin of the onboard connector

4. Using the Multi Meter, check each connector component. Overheat defective connectors. If they still don't work, replace them. Check again

5. If it still doesn't work, check out any other good LCD screen as sometimes the problem is with the entire LCD screen, not just touching your phone.

Button Touch problem

• Function button connector and charging connector. Now check it out.
• If it still doesn't work, check the charging connector if it's problematic. Change it as there is nothing you can do about it.

The above steps will surely help you solve the touch screen problem from your Samsung Galaxy in the most efficient way. If your touchscreen is giving you trouble, then your phone has become a complete krippler since you won't be able to do anything on your phone (don't even unlock your phone in any way).

I replaced the display on the phone and now the Samsung sensor does not work!

1. If your display is white or all black, start by performing a soft reset on your device. If your screen still won't work after a reset ...

2. Try the repair again from the beginning. In the step where you connect the shield to your main board, check the original shield to make sure it still works.

3. A lock on your display is a sign of too much pressure on the screen caused by transportation or during installation. Open the device again and make sure none of your internal components are causing pressure.

4. If you see lines down your display, or only partially working touch functions, then you may have a faulty or broken part.

Samsung Galaxy screen not working is a preventable problem. Here are some helpful tips to keep your Samsung safe:

Use a really good protective case to properly protect your Samsung Galaxy display panel. This will prevent screen damage, cracks or scratches after being dropped.

Sometimes your phone has a manufacturing problem. Therefore, to keep your phone and you protected, make sure that you keep your warranty until it expires. This will ensure that you get the support you need from Samsung, as long as the problem isn't caused by your negligence.

Install reliable antivirus software to protect your system from malicious attacks.

Make sure you read the reviews before downloading any apps. This is a great way to find out if an app is viral and will cause problems for your Samsung Galaxy. The best way to do this is to filter reviews according to reviewers who use the same device.

Try not to play games with too large graphics, as this will expand the capabilities of your device. Either play one game at a time, or play for a short amount of time.

Do not overcharge the battery at the same time - this will increase the chances of overheating your phone, which could damage your phone's components.

While the Samsung Galaxy screen problem can be caused by multiple reasons, there are an equal number of ways to counter them. So no need to panic - this article is a great example for solving your problems.

If you have not solved the problem - Samsung sensor is not working, please let us know in the comments, we will help.

On my Samsung Galaxy S6 (Android 6.0.1), sometimes the Back button starts to click on its own, closing the current app or returning to a page. This sometimes happens in bursts making the device unusable.

Answers

rajatpunkstaa

I faced the same problem. Tried everything but nothing completely solved the problem. Finally visited the service center and fixed it. They said that some kind of malfunction in the digitizer under the back button started, as if the back button was pressed when the device reaches a certain temperature.

One thing you can try: (If you have user rights) Enable on-screen navigation buttons and disable normal touch buttons and see if the problem persists. Mine was only a month old, so I went to the service center.

Good luck, Hope this helps.

With Lambric

There was the same problem. I did a factory reset which didn't solve anything, I tried a code that resets the touchscreen sensitivity. No joy. It's hardware. If your phone is under warranty, please take it back. My camera was wrong, it was also taken by the local repair shop. They replaced the strip that runs around the perimeter of my cell. This strip contains sensors at the bottom of the cell and on the side, as well as a charger port.

The problem has been solved. Hope this helps

user145490

I would not think of this as a software problem, because if you did a factory reset it should iron out most of the kinks in the OS. And this is not limited to S6 only, as it was reported back in S4. This was probably due to a hardware problem caused either during packing / transportation / mechanical damage, for example, during a fall, read

If your device is fairly new, return it for repair or a Samsung Authorized Service Center. When opening the phone, they will likely release pressure on the plate that makes contact between the return button and the mechanical piece of the equipment.

Malfunctioning touch buttons is a common problem with Samsung Galaxy S6 Edge smartphone owners. In the event of a breakdown, the functions of the device become difficult, it does not respond to many commands. At the LP Pro service center, specialists will successfully fix the problem as soon as possible, and the phone will work like new.

Why did the touch buttons stop working on the Samsung Galaxy S6 Age

Possible causes of breakdown:

• Wrong firmware version. Sometimes, after a software update, some functions of the gadget stop working.
• Breakage of the cable that connected the display and the sensor.
• Failure in software. Reinstall or update the firmware.
• Mechanical impact. Often, after a blow or pressure on the gadget, the buttons fail.
• Defective smartphone PCB.
• Water ingress into the housing. This leads to oxidation of the metal parts of the phone.

What to do if touch buttons don't work on Samsung Galaxy S6 Edge

A reboot helps fix minor system crashes. If the problem persists, it is not recommended to repair the gadget yourself. This can make the problem worse and cause expensive repairs. Entrust your device to professionals. LP Pro service center specialists will carry out a thorough diagnostics and repair the smartphone as quickly as possible. With us, you are guaranteed to get an excellent result.

Does your Galaxy S6 automatically select the back button that closes apps? This issue appears sporadically on the Galaxy S6, but it's not always a physical glitch. You can try to fix this software.

Pressing the back button on the back is certainly not optimistic. In this situation, the first thing that comes to mind is the possibility of damage to the device. In fact, this problem often occurs, for example, after a flood of the phone, but it is worth knowing that this is not always the case. Many people had a similar problem with auto-clicking back and the software turned out to be the source of the problem.

Before you decide to visit a website, there are two things you should try to do yourself. First, we reload the system overlay settings, and if that doesn't work, we will return the phone's default settings. Many people report that this is sufficient to reduce or even completely eliminate this problem.

1. Reset TouchWiz

The first way is to reset the TouchWiz overlay. You can do this using Android settings. Switch to Android to Android "Settings\u003e Application Manager"... A list of all your applications installed on the system will be displayed.

Use a filter to customize the list to display all applications, including system applications. Then search for element "TouchWiz" and go to its details.

Stop the TouchWiz application with the button "Power stop" (Force Stop). Then select "Clear data" (Clear data) and "Clear cache"(Clear Cache).

This will likely reset your home screen and icons, but in many cases it also fixes the back button press issue.

2. Perform a so-called hard reset

If the above solution does not help, then there is one more thing worth doing before you decide to service and repair. You can do a so-called hard reset, i.e. just reboot your phone to factory settings. This option will delete all data from the phone, including your personal files, and restore the device to default settings.

To do this, first turn off the device completely using the power button. Wait a minute, then turn the phone back on using the following key combination:

Home button (Home) + Power button (Power) + Volume up button (Volume up)

Press the buttons until Recovery (Android System Recovery) appears on the screen. Using the volume buttons, you can navigate up and down the menus and alternately select an option by pressing the power button.

Select option "Wipe data / factory reset" and confirm the deletion of all data. Wait for the operation to complete and return to the main screen of recovery mode. Select in it "Reboot the system now"to restart the phone normally.

The device will restart with the cleared software. On first launch, you need to set up the device, the same as when you first turn on the phone after removing it from the window (language selection, Wi-Fi connection, Google account login, etc.).

The problem with automatic reverse should be resolved. However, failing to do so could result in physical damage to the device and the phone may need to be put into service.

3. Remove the foil / tempered glass from the screen

Another source of the problem is often a screen protector or tempered glass that adheres to the entire front of the screen. It is true that there is no guarantee that a photograph of the screen will help (and will be discarded after removing the foil / glass), however, many people also report that it helps in some cases.

You can try removing the screen protector and see if it fixes the issue with the automatic back button press.

Despite the 4-year age, Samsung S6 is still very popular and in demand among buyers. It easily competes with modern gadgets. The phone is functional and powerful enough for comfortable use. But there are also vulnerabilities in it. Often, owners are faced with the fact that the buttons of the Samsung S6 do not work or they do not function properly. Moreover, the cause of the breakdown does not always lie “on the surface”.

The main causes of malfunctions

The most common causes of problems with the touchpad include:

• Failure of internal microcircuits. Caused by oxidation (when moisture enters the case) or cracks through which dust and dirt can penetrate into the device.
• Disconnection or complete breakage of the loop. Occurs due to mechanical damage to the phone.
• Crashes in software. They are mainly due to incorrect firmware of the gadget or the installation of programs incompatible with the phone.

The most common reason that touch buttons stopped working on the Samsung Galaxy S6 is careless handling of the device. Shocks and falls cause not only external aesthetically unattractive scratches, which are provocateurs of damage in the touchscreen layers or in the internal elements of the gadget, but also rupture of trains, as well as cracks on the surface of the screen that are invisible during visual inspection.

What to do when touch buttons stop working on Samsung Galaxy S6

Before taking your smartphone to a service center, you should eliminate a software error. This is done by resetting the gadget to factory settings. To do this, proceed according to the following algorithm:

• Press two buttons at once: "Volume" (+) and "Power".
• A menu will open. In it, you must select the Wipe item.
• Confirm the action.
• Reboot ("Reboot system ...").

Switch using the volume buttons. Confirm the action with the "Power" button. Remember, this reboot will erase all data from the device and it is wise to back up important data before proceeding.

Repair of mechanical breakdowns

If after rebooting the problem persists, then the reason lies in mechanical damage. The first thing to do is to carry out a complete diagnosis of the device. Such a procedure will allow you to identify a failed part: a loop or a touchscreen. After identifying the damaged element, it is necessary to replace it (repairs can be carried out both independently and with the help of a service center master). As a rule, after such a repair, the touch panel returns to normal operation.

Quality replacement parts

For effective repairs, it is necessary to purchase only high-quality spare parts. Only such elements can guarantee the long-term serviceability of the gadget. You can buy a flat cable or a touchscreen for Samsung s6 repair in our online store. We sell only high-quality goods at attractive prices, and provide a guarantee for it.

Suitable products

Found 3 products