The system process loads the windows 7 processor. NT Kernel & System loads the Windows system - what is it. Reducing the load by disconnecting

If, after long-term work in Windows 10, you begin to notice that the system is overloaded, lags appear, and the reason for this is the NT Kernel System system process, I will tell you how to deal with this. This process was added to the "seven", and since then a situation may arise that the service heavily loads the system, the processor and RAM take up 100% of the operating system's resources, new programs open too slowly, and rebooting does not help in any way. Next, I will tell you how to get rid of this scourge, what to do in this situation, and what kind of NT Kernel System it is.

As it usually happens, after the first, everything works fine, no "brakes" are observed, applications work efficiently and quickly, everything starts and runs like clockwork. But as the OS becomes cluttered, problems with this service begin to appear, you have to wait a long time for this or that program to start.

• There is only one reason for this - excessive clutter of the OS... The first thing to do is to reinstall the drivers on the hardware, since it is the system libraries that are responsible for the successful interaction with the hardware components of the system unit. Better to install drivers on a clean system. You can not completely remove the operating system, but simply do it. In this case, no installed programs will have to be reinstalled, and the matter will be limited only to the global cleaning of garbage and unused DLL files.
• Another reason why the presented service loads RAM is this is a computer overload with software... Uninstall all unnecessary software, and after uninstalling, perform using the CCleaner, System Cleaner or similar program. There have been cases when the service overloaded the system even with the Outpost Security Suite Pro firewall installed, so in some situations even a banal firewall replacement can help.
• Finally, the final reason for this behavior of the NT Kernel System is insufficient hardware... If you are working on XP with weak hardware, then no problems should arise, since the hardware requirements of XP are several levels lower than the "tens". If you are trying to work on the "ten" or even "seven" on the same hardware, do not expect fast work. If in doubt, review the system requirements for the operating system you are using. After that, all doubts should be dispelled.

If you are still used to reinstalling the system from time to time, since you often install new software, and even after uninstalling not all INI objects are deleted, then you can easily install the OS from scratch - this is not a bad idea. see also

It so happens that a user in the system seems to have not started any resource-intensive programs, have not installed anything recently, and the load on the processor and RAM suddenly increases incredibly (albeit for a short time). The culprit, if you look at the active services in the Task Manager, turns out to be a process with a description like System (NT Kernel System) or NT Kernel & System. What it is, few people imagine, as well as why this particular service begins to consume computer resources at the level of 60 to 95%. Let's try to figure out what's what, and at the same time we will consider the issues related to how to reduce the load on the system.

System (NT Kernel System) - what is this process?

In general, even the most advanced users cannot give an exact definition of this service. However, based on the name, it can be assumed that it refers to the processes associated with the kernel of the system (command processor) and, as it is believed, is the link between the hardware and software part of the computer system.

Another point is that this particular service is partially related to loading the operating system, although it is directly related to this only because it contains the data and settings of the welcome screen. It is not known for certain why the NT Kernel System loads the processor and memory, but it can be assumed that this can be affected by a viral effect, and access to unused user programs, and outdated drivers, and the lack of mandatory system updates. Thus, we can offer several simple solutions that will reduce the load on resources. By the way, it should be noted right away that such problems for some reason most often appear in Windows 7 and 10. Why? Nobody knows. But in other modifications, even the shadow of such a phenomenon was not noticed.

NT Kernel System loads the system: what to do first?

So, the first thing to do when the load rises is to simply restart the system. Perhaps there was a short-term crash at some stage that will disappear after a reboot.

If the consumption of resources reaches the same level over a period of time, you should try to roll back the system by choosing a configuration when such phenomena were not observed using the "Recovery Center".

Viruses

It is possible that the NT Kernel System process in Windows 7 or 10 behaves this way only because it is not an original service, but a virus masquerading as it.

In such a situation, it is advisable to immediately perform a deep scan of the computer with some kind of portable utility, but it is better to use boot from a disk or USB-drive with the Kaspersky Rescue Disk program recorded on them, which, when scanned, will be able to identify viruses deeply embedded in the system and those threats that embedded in RAM. The utility is started even before the operating system itself is loaded. When starting the scan, it is better to select all partitions and install a deep scan.

Startup

Since the System (NT Kernel System) service is related to starting the OS, sometimes the load that appears after the system is fully loaded can be reduced by completely disabling unnecessary program elements at startup.

To do this, in Windows 7, you can use the msconfig command entered in the Run console, followed by clicking the appropriate tab. In Windows 10, this section is located in the "Task Manager". Try to simply turn off everything that is there and restart.

Issues for updates, drivers and installed applications

Sometimes you can find user reviews that indicate that the excessive activity of the System (NT Kernel System) service may be due to the fact that the latest updates are not installed for the system. It is possible that the Update Center has crashed.

In this situation, you need to search for available updates yourself and install critical updates.

Drivers can play a role too. It is usually recommended to update them. To do this manually is a completely thankless task (especially since Windows cannot always find the most suitable drivers for devices). Better to use programs like Driver Booster, which find the latest drivers on the websites of hardware manufacturers and integrate them into the system without user intervention.

If there are also problems with the updated drivers, one of the solutions is to roll them back in the "Device Manager", having previously found out which driver is causing the load problems.

In terms of calls to unused programs, problems can also be observed. Alternatively, it is recommended to remove those applications that have not been launched for a long time, and then clean the registry and hard drive using some kind of optimizer (CCleaner, Advanced SystemCare, etc.).

Outcome

These are the main methods of reducing the load on system resources, if the described process is really the culprit of all the troubles. Alas, it is absolutely impossible to accurately indicate the cause of such phenomena, so you have to act, as they say, at random, trying each technique in turn.

Sometimes users of Windows 7 or 10 (less often other versions) are faced with loading the system due to NT Kernel & System... The problem is the long processing of commands, strong brakes in computer games and browsers. It is not entirely clear why exactly 7 and 10 versions of the operating system are more often exposed to this problem. And it arises, as a rule, quite spontaneously, like the user did nothing, and the RAM is loaded to almost 95%.

What is NT Kernel & System?

Process NT Kernel & System found in all Windows operating systems. This is a system program and it runs in the background. It is difficult to find an exact definition, but it is possible to establish its work. She is partly responsible for processing installed third-party programs, and if they begin to behave inappropriately, then "NT Kernel & System" begins to load the processor. This includes all updates, improvements, game engines, etc.

How to remove CPU load

We have prepared several solutions and methods to help you disable such a high load on Windows 7/10.

We clean up system junk

When a user has been working on an operating system for a very long time without proper care, too much software junk accumulates. Cleaning it will help to regain its former speed in work.

Roll back the drivers

Recently installed driver on Windows 7/10. Their libraries do not always integrate well with all processes and services - hence the overload through the "NT Kernel & System".

Reducing the load by disconnecting

Remember that the problem in which NT Kernel & System loads Windows (7/10) does not arise just like that, most likely you have installed updates or third-party software. As a last resort, reinstall Windows will definitely solve the problem at the root.

Some PC users may experience sudden slowdowns (or even regular freezes) of their operating system. With a careful search for the culprit, the last process is NT Kernel & Systems, sometimes consuming up to 60% of the power of the central processor. In this article I will tell you what NT Kernel & Systems is, what the specifics of its work are, and how to fix the situation in which NT Kernel & Systems loads Windows.

Translated from English, the name of this process means something like "Kernel and system processes"... Accordingly, the specified process is an attributive system process of the Windows operating system, which is highly discouraged to terminate.

This process usually runs in the background, being an important link between the hardware and software of your computer (including it contains the boot image of Windows OS (the so-called "boot screen")).

Why NT Kernel & Systems is loading the system

Usually, working in the background, this process does not present any particular problems. But if it starts to intensively "load" the processor and consume a significant part of the RAM, then this usually indicates problems with any drivers (or programs) on your computer.

There have also been cases when the reason for the "hyperactivity" of this process was overheating of the central processor (in particular, due to drying of thermal paste), which caused a load on the system of the mentioned process.

And, of course, the reason for the NT Kernel & Systems situation is loading memory and the processor may be malignant activity of virus programs. After we figured out what NT Kernel & Systems is, we will learn how to fix this problem.

NT Kernel & Systems loads the system - how to fix

So, if you are faced with a situation in which NT Kernel & Systems loads the processor, then I recommend following these steps:

Conclusion

If you are faced with a situation in which NT Kernel & Systems loads the Windows system, then I recommend that you follow the entire set of advice that I described above. Most often, this dysfunction is caused by an incorrectly working driver for a device that needs to be updated (or vice versa, to roll back to the previous version of the driver). Follow the entire list of the above tips, it will help get rid of NT Kernel & Systems dysfunction on your computer.