Recovery mode ios recovery mode. How to put iPhone into recovery mode - instructions. Recovery after a reset
IPhone Recovery Mode is a special emergency tool for fixing device errors. It also applies if the iPhone won't boot - the screen doesn't work, the buttons don't function.
This is a system tool with which you can fix errors in your smartphone. It is used in the following cases:
- To resume normal operation of the operating system. With its help, software failures are corrected, which lead to the shutdown of the device and the termination of its functioning in normal mode. The repair process includes checking the files for damage, and, if necessary, resetting the settings.
- To update the operating system to the latest version. The procedure is accompanied by system control, installation of additional components, if required.
This mode is a special technical tool to return the iPhone to working condition. It is provided by the manufacturer, so when using it, the company's warranty obligations will not go anywhere.
How to enable iPhone recovery mode
Even if the device does not respond to button presses, it can be forced into Recovery mode. To do this, use two buttons on the panel. Before starting work, the phone must be completely switched off.
- Press and hold the "Home" button.
- Without releasing it, we connect the iPhone to the computer via a USB cable.
- We are waiting for the image of the iTunes logo and the wired connection icon to appear on the display. This will indicate that Recovery Mode is loaded.
Now it remains to launch iTunes. Check if the phone is actually working in the correct mode.
How to exit Recovery Mode
To return to normal operation of the device, you need to restart it.
- Disconnect the USB cable from the phone.
- Hold “Power” for a long time to turn off the iPhone.
- We quickly press the same button to turn it back on.
- We are waiting for the download to complete in normal mode.
Sometimes it happens that the device does not come out of Recovery after a reboot. He seems to fall into a loop, from which you can get out only by special means.
What is a recovery loop
A special case of using the technical mode - Recovery Mode Loop. This is a system crash in which the iPhone gets stuck in a recovery state and cannot get out of it. This happens when system and hardware errors are detected that could not be fixed after a forced reboot.
What leads to getting stuck in the loop:
- software failure;
- unsuccessful attempt to restore;
- errors during the update;
- installing a lower firmware version.
A quick way to solve the problem:
- Reboot by holding the Home and Power buttons together.
- Put your phone into Safe Mode. Here you can erase the files that led to the Loop mode.
If this does not help, exit the loop using the following programs:
- TinyUmbrella;
- redsn0w;
- RecBoot;
- ReiBoot.
If all these actions did not help, all that remains is to delete the files that are stored in the device's memory. After that, restore and update to the new version via iTunes.
What is the difference between DFU mode and recovery mode
When working with the iPhone, another technical tool can be used - DFU. Many users confuse it with Recovery Mode. In fact, it's easy to distinguish them - when Recovery is on, the display shows a USB cable and the iTunes logo. If DFU is activated, the device does not give any identification signals - its screen is empty, as if it was completely turned off.
These two modes are designed to restore the operability of the device. But the principle of their action is completely different. Recovery Mode can be compared to a rollback, like on Windows - it returns the system to the previous restore point. System files remain intact, while the necessary parameters and settings are restored.
DFU Mode is bootloader mode. Its use is like a complete reinstallation - all elements of the system are recreated.
You can restore an iPhone on your own - for this, manufacturers have provided special technical means. If you are having difficulty using them, contact an Apple Service Center.
Restoring an iPhone is a standard operation to return an Apple smartphone to a working state after various failures. Unsuccessful firmware, incorrect jailbreak, incorrect iOS update - if you know how to restore your iPhone, you can fix almost any malfunction that occurs during the operation of this device.
Recovery order
To restore iPhone, you need to enter Recovery Mode. It's easy to do this:
When the iPhone is ready for the rollback and error correction procedure, click the "Restore" button. 
iTunes will independently find the current version of the firmware and install it on the smartphone, returning it to the state in which it was immediately after purchase.
DFU operation
If iPhone recovery does not work in Recovery Mode, then you need to enter the device into DFU mode. This mode is used when there are software errors - for example, when the iPhone does not turn on. DFU mode works at the hardware level, so it helps to perform a factory reset even in the most difficult cases. To enter DFU mode:
- Connect your device to your computer.
- Press and hold Power and Home for 10 seconds.
- When you count to 10, release Power while continuing to hold the Home button.
It is difficult to enter DFU mode the first time, as nothing changes on the screen. If the recovery mode detects itself with the iTunes icon, then the phone does not seem to turn on in DFU. Therefore, you need to look at the computer screen where iTunes is running. As soon as the iPhone enters DFU mode, a notification will appear in iTunes informing that the program has detected the device in recovery mode, and you need to reset all settings and content to continue working with the smartphone. 
If you need to install a different firmware, then hold down Shift and click "Restore". An explorer will appear, through which you need to specify the path to the previously downloaded firmware.
Recovery without a computer
If the computer is not at hand, it does not turn on, or you cannot connect an iPhone to it, then try resetting all settings through the device settings. As a result of this operation, you will get a clean smartphone without settings and user information, so be sure to make a backup before resetting. If the smartphone turns on normally:
It is not necessary to delete custom files. If the iPhone turns on, then you can fix the malfunctions in its work by simply resetting the settings. In this case, the user's personal data will remain intact.
Recovery after a reset
If you need to restore your iPhone after resetting all settings and deleting content, then you won't be able to do this without a backup. The presence of a backup file with information stored in the device's memory is the main point that you need to check before performing a reset. When the iPhone is rolled back to its factory state, all of the user's personal data is erased from it.
Create a backup before factory reset:
After the reset, the iPhone will be like new: no content or settings remain on it. To get all the information back, you need to connect the device to your computer and restore from a backup via iTunes. Choose the most recent backup, as it contains the most relevant information. 
You can also restore all settings after a reset through iCloud, provided that you have stored backups on the cloud. In this case, when setting up the iPhone, you need to select the "Restore a copy from iCloud" option and specify the appropriate backup.
Recovery problems
If after a normal recovery the phone does not turn on, then it makes sense to put it into DFU mode and try to restore it again through iTunes. This time, you should not trust iTunes: download the official firmware and select it in the explorer window by holding Shift and clicking on the "Restore" button ... 
Sometimes the TinyUmbrella utility helps to solve the problem that the smartphone does not turn on after a factory reset via iTunes. This program has an "Exit Recovery" button. If the iPhone after recovery does not turn on, you need to select it in the TinyUmbrella window and click "Exit Recovery". 
There are times when your iPhone, iPod or iPad refuses to boot normally when updating firmware over Wi-Fi or system crash. This is often encountered by users who decide to jailbreak their device, or they are experimenting with installing various tweaks from the Cydia store.
If such a situation arises, do not be discouraged, the problem can be solved by yourself in almost any situation, if it arose at the software level - simply by restoring the firmware. On devices with the iOS operating system, updating and restoring the firmware can be done simply by switching it to Recovery or DFU Mode.
In this article we will tell you what Recovery Mode is, how to enter and exit this mode. You can read about DFU mode in our article How to boot iPhone and iPad in DFU mode
Recovery Mode is a software mode for flashing the device, in which the main system files are not affected, only their integrity and recovery are checked, the iOS settings and settings are reset, and changes are made during the update, if any.
If you see an image of a USB cable and an iTunes icon on the device screen, then your gadget is in Recovery Mode. The device switches to this mode as soon as you start the process of updating or restoring iOS using iTunes on your computer, or you yourself have put your iPhone and iPad into Recovery mode.
How to enter Recovery Mode
You can put your iPhone, iPod or iPad into Recovery Mode absolutely from any state of the device.
Step 1 Turn off your iOS device. Press and hold the Power button until the Power off slider appears on the screen, then drag it from left to right to turn off the device
Step 2 Press and hold the Home button and connect your iPhone, iPod or iPad to your computer using a USB cable. An image with an iTunes icon and a USB cable will appear on the screen of the iOS device, indicating that the device is booted in Recovery Mode
Step 3 On your computer, launch iTunes to make sure your device is in recovery mode
Now you can easily reset and restore, as well as flash the gadget.
How to exit Recovery Mode
Exiting recovery mode is pretty easy. To do this, press and hold the Power button until the device turns off, then press the same Power button again to turn it on again in normal mode.
It also happens when the iPhone, iPod or iPad refuses to exit Recovery Mode. The device enters the Recovery Mode Loop. In this case, to take the device out of this mode, you need to use special utilities like TinyUmbrella, redsn0w, RecBoot.
Recovery Mode (recovery mode) - one of two emergency modes of Apple technology. Recovery Mode makes it possible to restore the functionality of the i-gadget if, due to a software failure or as a result of an unsuccessful jailbreak, the device has turned off, does not want to boot and generally respond to pressing buttons.
Recovery Mode and DFU Mode - modes provided by Apple, so their use does not entail a loss of warranty. The differences between them were discussed in detail in the article. In short, Recovery Mode more "softer" in terms of the impact on a mobile device and at the same time less effective - many problems are too tough for him. DFU Mode bypasses iOS and builds all files from scratch. Resort to DFU recommended only in critical situations and only when the recovery mode has already been tried.
Before you enter the gadget into Recovery Mode, take a USB cable and plug it into a PC port. Do not connect the cord with the device itself..
Step 1... Turn off your smartphone by long pressing the " Power"- wait for the screen to turn off. If the device is already turned off, you can skip this step.
Step 2... Hold down the " Home”And insert the cord. The iPhone will boot up - on its screen you will see an image of a USB cable and a logo Aityuns... This is another difference between the recovery mode: DFU iPhone just has a black screen - to understand that the mode is activated, the user can only by message in iTunes.
Step 3... After a few seconds in Aityuns a window like this will appear:
You need to click " OK». Then you can reset, restore or flash the gadget.
How to get an iPhone out of recovery mode
You need to exit recovery mode using the following algorithm:
Step 3.Click " Recovery Fix"And wait for the gadget to load normally.
The "Recovery Fix" button becomes available only when the iPhone connected to the computer is in update mode.
You can also "break the loop" with iTunes... It is enough to connect the gadget to the computer, switch to the device control mode and click " Restore iPhone».
Why wasn't this method mentioned earlier? Because thus, the user will lose all data that was stored on the iPhone. In addition, the device will be updated to the latest version of iOS, and there will be no way to return to the previous one (which, probably, the owner of the gadget was 100% satisfied with). When using special utilities, there is a chance to get a device with the same operating system and content.
Conclusion
Recovery Mode helps fix many iPhone problems, but it's important to put iPhone into Recovery Mode rightotherwise there will be more problems. If, for example, the user hurries up and disconnects the gadget from the PC before the update procedure is over, the iPhone will fall into a recovery loop, from which the device can be removed only by using special programs.
