home » Goods and services » Epson l110 diaper reset. Resetting the error of the ink-absorbing pad (pampers) on EPSON L100, L210, L300, L350, L355. Epson pampers reset software

Epson l110 diaper reset. Resetting the error of the ink-absorbing pad (pampers) on EPSON L100, L210, L300, L350, L355. Epson pampers reset software

The Epson printer locks up when it comes to a certain amount printed pages. As soon as the printer reaches this page threshold, an error occurs.

Further printing is not possible until action is taken.

To reset the absorbent pad error, use the Adjustment program (AdjProg).

All materials in this article are presented for informational purposes only.

Archive password - site

The downloaded archive will need to be unzipped and run the program - Adjprogcracked.

If you did everything correctly, then the following window should open in front of you:

Press Select, select the printer model and connection port. The printer must be turned on and connected to the computer. There shouldn't be any difficulties here.

We selected the model, clicked OK.

After selecting the model, click on "Particular adjustment mode", thereby going to the service menu:

In the list we find the item "Waste ink pad counter", double-click quickly with the left mouse button to go to the absorber (diaper) settings menu.

Check the "Main pad counter" checkbox and click on the "Check" button. Empty fields will be filled in with numbers. In my case, the printer is blocked at 6500 pages. As we can see, this figure is even exceeded by 28 pages.

Again, check the "Main pad counter" box and click on the "Initialization" button.

After all the manipulations, the program will ask you to restart the printer, turn off and turn on the printer.

The error has been cleared, you're done!

The next time such an error appears, I recommend that you contact the nearest service to replace the absorbent pad.

The pampers, or absorber, is an important part in the printing equipment. This part is a special plastic container filled with absorbent material high level... Its main function is to collect ink that is released from the cartridge and does not get onto the paper.

This happens during printing, idle time, or after feeding paper onto the print roller. It may be the cause of some device malfunction. One of the most common problems is print blocking caused by a low ink cartridge error. This problem occurs if the amount of ink in the container approaches the minimum line, as well as after refilling the cartridges with non-original ink.

Branded cartridges of the device have a printed code on the container, which must be entered after replacing it. Otherwise, the device will be locked and will not allow printing until the license code is entered. To solve this problem, you need to reset the pads of the Epson printer.

This utility is especially relevant for the L210, L110 printer models and other multifunctional devices with the ability to continuously print the L line.

What will be discussed:

How to reset the absorber

To reset the paint level counters, as well as display reliable information after refueling, can be used special program to reset the Epson pads. The utility will cope with the task in a few minutes, without affecting the quality of further printing.

The functionality of these programs can be extended, allowing you to change the settings of the device. Some models from this manufacturer allow the use of non-stamped cartridges as well as third-party ink. In such printers, free resetting of the Epson pampers is performed using certain key combinations on the MFP itself ("sheet feed" + "cartridge cleaning"). In the absence of these keys, you must use special programs.

Programs for resetting the diaper counter and their use

There are several variations of the software for zeroing the absorber counter of the printing device:

SSC Service Utility - not supported by all models;
PrintHelp - optimal for the T50 printer, it can request license codes for the operation;
Epson Adjustment Program - the official utility from the developers, it resets the Epson l110 diaper, as well as the l210, L355, T50, XP and other popular printed and multifunctional devices with continuous printing function. The disadvantage of the program is the English-language interface with the absence of the Russian-language version.

Adjustment Program Utility - Quick Start Guide

The optimal solution would be to use exactly official program... Its functionality allows you to change the parameters of the device, printing. However, you should not tamper with the factory settings if you are not a printing equipment service technician. Incorrect intervention in the printer's functionality may disrupt the operation of the device.

You can download the utility from the official resource of the manufacturer. The main requirements for downloading and installing are:

free access to the Internet;
operating room windows system xp / windows 7;
availability installed drivers printer on a computer or laptop.

If there are no installed drivers for the printing device, the program will not be able to communicate with it.

After installing and running the utility, you must select the printer model and port, as shown in the photo below. If the required model is not in the offered list, you can select XP-402. We will consider how to reset the device counters using the example of performing the operation to reset the Epson XP diaper. After selecting the model of the connected MFP, press the "Select" key.

"Particular adjustment mode" - allows you to go to the program control menu, located in the lower right working area.
"Waste ink pad counter" - located in the middle of the displayed list, exits to the settings menu of the device's absorber. Check the box here.
A new window will open.
Check the box for "main pad counter".
Press the "Chek" key.

Set a check mark on "platen pad counter".
Press the "Initialization" key. This is the paint level reset key.

At the end of the operation, you must turn off the device and turn it on again. A more visual instruction for resetting the adsorber settings is shown in the video.

Zeroing the ink level indicators

Zeroing using this utility must be carried out if any of the cartridges displays an ink level above 100%, or 0%. To do this, download the program and install it on your computer. Then connect the printer using a cable. Even if the machine supports a wireless connection, it is the cable connection that is important to reset the counters.

Step-by-step actions for zeroing the absorber parameters:

select the model of the connected printer from the list;
press the button "check working off";
press the "diaper reset" button.

An important nuance in the implementation of this operation is the availability of a working connection to the Internet. After the end of the process, the printer should be turned off and on again. This is done to ensure that the new settings are fixed in the memory of the device.

In addition to performing the operation of zeroing the absorber settings using any of the described utilities, it is recommended to periodically clean the gasket under the cartridges. This will avoid problems with the device during its further use.

Anyone who uses non-genuine printer cartridges will need to download the Epson Adjustment Program. This is a program to reset the diaper.

The fact is that in printing devices there is a special part that absorbs excess waste ink. When the machine thinks it is full, it will signal that the cartridge is empty and the printer will stop printing. Although in fact there will still be plenty of ink. This problem is exactly what the Epson Adjustment Program solves. It artificially resets the diaper full indicator, and you can continue to work as usual until you really run out of ink.

Each model may require a different version of the software, so be sure to find out the exact name and select the correct edition before installing. Supported models:

l110;
l210;
l355;
l300;
l350;
l222;
l132;
l366;
and others.

Even if your model isn't on the list, it's still worth a try. It might work.

Also, the application can do other useful actions, such as cleaning the print head or refilling.

Video instruction on how to reset the ink level in the Epson Adjustment Program

Screenshots

System requirements

OS: Windows 10/8/7 / Vista / XP
CPU: Intel or AMD (from 500 MHz)
RAM: 64 MB
HDD: 1 MB
Type: Printing Software
Release date: 2018
Developer: SEIKO EPSON
Platform: PC
Edition type: final
Interface language: Russian (RUS)
Medicine: not required
Size: 1 Mb

Installing and Using the Epson Adjustment Program on a Computer

Run setup file
Install the program according to the instructions
Run the program
Choose your printer model or trust automatic detection
Click Particular Adjustment Mode
In the list that opens, select Waste Ink Pad Counter
Check the boxes next to Main Pad Counter and Platen Pad Counter and click "Check" to check
If there appears a value close to or equal to 100%, then you need to reset
To do this, put the jackdaws again and click "Initialization"
After that, a window will appear asking you to turn off the printer
We do this using a button on the device itself
Next, turn it on when the corresponding message appears
The counter has been reset.

The Epson Adjustment Program is a program that "resets" the ink reading on Epson printers. In the utility, you can turn off the indicator that shows the paint level and turns off the "pad" of the device.

The program provides a complete data reset and disables the counter of the absorbent "pad". Many users call it "diaper". Outwardly, this pad resembles a "diaper".

It absorbs printer ink that was used up during the printing process. The program removes statistics from the cartridge while priming the nozzles. This operation is performed for automation when the printer uses a continuous ink supply "CISS". The utility is suitable for resetting any cartridges of Epson printers.

If necessary, you discard non-genuine cartridges and receive a notification about clean cartridges. When you reset the cartridge in the normal way, you will see a low ink message although the cartridge is full. In such cases, use the "diaper reset". The program can be used instead of the well-known PrintHelp utility.

Compatibility

The program is available in different versionswhich are suitable for Epson printers. This version of the utility resets models L110, L210 and others. To reset the ink count on the X30 and X40 versions, go to the printer's website.

Program operation

The utility does not support Russian localization. The interface is simple and straightforward even in English. After launching the utility, press the "Select" button and select the printer model. Then select a port. When one printer is connected to the computer, it is advisable to select the "Auto selection" parameter.

After that, you need to return to the main window and click on "Particular ajustment mode". Next, you need to select the item "Waste ink pad counter". Then put a mark in the window that opens and click "Check".

Wait for the utility to find the ink counter and show the parameter 100%. Check the box next to this item and click on "Initializtion". Then the program displays a window and asks to turn off the printer. After turning on the device, you will see a message about the reset of the "diaper".

Key features

resets the ink counter for the absorbent pad;
supports work with Epson printers;
no Russian localization;
distributed free of charge;
the shell of the program is simple and straightforward.

All Epson printers with a continuous ink supply system have a special counter that counts the number of sheets printed by the printer. We need this counter in order to determine the approximate time for flushing (replacing) the so-called waste ink absorber or as it is popularly called a diaper.

What is a diaper in a printer?

A pampers in a printer is a special plastic container that contains a highly absorbent material such as a sponge. It serves as a collection of ink that is released during the printing of the printer and does not fall on the sheet of paper, for example, during the idle time of the printer or in the period before and after printing.

This is what a diaper looks like in epson printers

Adjustment Program - Program for resetting pads in Epson printers

This program is free and allows just a few mouse clicks to perform a soft reset (zeroing) of the pampers and ink levels on printers with CISS from Epson.

There is full support for L210, L110, L300, L350, L355 models.

After downloading, unpack the archive with the program. It does not require installation, so after unpacking, you immediately need to run the executable file Adjprogcracked.exe.