Daily limit on livesurf. Advice and recommendations for traffic tuning. Limiting the speed of users who have exceeded the daily limit

The traffic sent for the site can be configured so that it meets the requirements of a specific task. This is why there are functions for selecting the desired traffic.

Among them, an important role is played by geo targeting... The setting allows you to choose only those countries from which traffic is needed.

You can select impressions only in Russia, Ukraine, or select the necessary countries from the list.

In addition to being geo-linked, you can configure traffic in such a way that every visitor was unique... And you choose the time of uniqueness yourself.

Uniqueness is set for a group, if there are several pages in a group, then a unique visitor will view them all.

You can also choose when the visits will be. Mark the hours at which we will not send visits in the table, use the ready-made solution or select random hours:

All settings that somehow limit traffic can reduce the number of visits... In this case, HPV can be increased and UTI reduced.

You can also select the devices from which visits will be made and the ratio in which they will be distributed:

If you would like to discuss these settings in more detail, clarify any nuances, or you just have any question, be sure to write to us so that we can figure it out together.

If so, then you need to enter the corresponding section of statistics.

• At LiveInternet.Ru Transitions from pages;
• Yandex.Metrika Sources of visits / Sites;
• Google.Analitics / Traffic Sources / Rerferral.

Only remains choose 5-20 linksfrom which users go to your sites and indicate them as a referral source.

How to set up direct referral sources from search engines?

With this setting, also do not forget that the page, and in this case search results page should contain a real link leading to your site.

So, to correctly specify the URL of the direct source of the visit you need to enter a keyword from your site in a search engine, find it in the search results and specify this page of the search engine as the source of the transition.

Let's see how it looks like with an example:

And we need referral source from google search engine.

we find this page in the search engine for the key query "Internet".

This URL will be the required referrer.

How to set up traffic for a young site?

If the site has appeared quite recently, it has not yet advanced in the search engines, and there are no transitions to it from other sites in the statistics, then you can create such sources yourself.

Good for that such methods are suitable:

• Posts in social networks with the URL of the advertised site;
• You can post a link to the site on the forums;
• Agree with other sites that their links will be posted on your site, and their link leading to your site.

What mistakes can you make when setting up a referral source?

In fact, the main mistake is that some users indicate as a referrer URL that does not lead to the advertised page.

This happens often when setting up traffic from social networks... If you need a transition from, for example, VKontakte, then this option will be NOT TRUE:

The same goes for search engines if You need a transition from Yandex, then you should not specify the referrer in this way:

If setting up direct sources of visits causes difficulties, or something is not entirely clear from the article, then please contact, and you will certainly be helped.

In order to increase the time spent on the site, and generally have a beneficial effect on the external statistics of the site, we recommend using the group setting.

In fact, everything is simple. For the page added to the group, make the settings that you need (visiting sources, geotargeting, keywords and search engines). Further, in the same group, from the main page of the site, add any other page of the same site as a separate page.

For it, you need to make very few settings, the most important thing is to indicate the source of the visit to the auto-referrer, as shown in the screenshot:

Important! For both pages in the group, set the same limits and geotargeting (if enabled).

Thus, you can increase the time spent on the user's site up to 1 minute. But you can add more website pages with the same settings and receive visits for one and a half, two, two and a half minutes, and so on.

Primarily UTI and HPV for the group.

HPV (number of visits per hour) - regulates the number of visits that will occur within one hour.

IMP (interval between visits) - set in seconds. It allows you to send traffic not immediately within one hour, but intermittently.

Finding the optimal HPV and UTI is easy.

For to set the correct HPVdecide how many visits you need per day, for example 100. There are 24 hours per day, which means about 4 visits per hour are needed. Therefore, the HPV will be equal to 4.

UTI can be calculated based on the obtained HPV... Since the UTI is set in seconds, we determine that in one hour there are 3600 seconds, if, as in our example, HPV \u003d 4, then the average optimal value will be 3600 / HPV (4), that is, 900. values \u200b\u200b800-1000.

The settings for the group from our example should look like the screenshot:

But if you already have configured HPC and IMP for your limit, and the limit has been overfulfilled and the excess credits have been removed, then please contact this problem in the project, be sure to indicate the group with which this happened.

First of all, check if the item name is correct.

If the name is correct, but there is no click, you need to check if the name of the element is specified correctly in the settings:

Elements are specified in the format of css selectors: id must be preceded by a pound sign (#), and a period (.) Must precede the class name
For example: #title, .link

If everything is correct and there is no click, then there may be one of these problems:

1. Opening a new window

If, when a click is made, a new window is opened (javascript, target \u003d _blank), this function will not work.

2. The element is inside the iframe

If the element specified for the click is located inside the iframe tag in the site code, then its execution is impossible.

3.ID or Class element is not persistent

If the ID or Class of the element placed on the site changes when the page is reloaded, then the function will also not work.

If none of the listed problems are related to your settings, and the item name is correct, then please contact to solve the problem.

Groups allow you to make internal transitions around the site in a very simple and convenient way. Internal transitions have a very beneficial effect on the external statistics of the site and allow you to increase the time spent on the site page for a small expense of credits.

In order to correctly set up a group, first of all, you need to decide how many pages will be added to it. Then, for the very top page of the site, you need to select search engines (you will find recommendations for filling in next to the filling box in the site settings). Or set up visiting sources. Or both.

Further, for the rest of the pages in the group, in order to set up internal transitions, the source of the visit must be set to an auto-referrer, so transitions will be made automatically between the added pages of the site.

For the group itself, it is necessary to set such indicators as HPV (visits per hour), it is very easy to select it for even distribution throughout the day, for this you need to divide the number of visits required per day by 24 and you will get the desired value for this setting. And also UTI (interval between visits in seconds).

You can also configure geotargeting for the group, showing unique IP addresses and not displaying the group's sites to the client program users if they are at night at the moment.

AGS - the filter of the Yandex search engine, designed to minimize the factor of outside influence on the search results.

Using this algorithm, Yandex puts sites on the black list.
Over time, the filter has improved, receiving the names AGS-17, AGS-30 and AGS-40.

The filter algorithm is classified, but there is some officially confirmed information.
The AGS overlay is the result of the coincidence of several factors that, individually, do not affect the site's hitting the filter.

Reasons for getting into the AGS:

• trade in spam links on the site,

• non-unique content,

• the number of incoming links to the resource is small in relation to outgoing links,
• low number of unique visitors to the site,

• small age of the site.

Behavioral factors are closely related to site traffic, detailed statistics and site usability, as well as its full-fledged unique content that makes it attractive to the user. Such an algorithm is aimed at improving the quality of the site, its competitiveness, and usefulness. Today it is clear that website promotion by links alone will be defective. Websites with good traffic, unique user attraction, user-friendly and well-structured win the competition if other optimization requirements are met.

For example, service programs that keep statistics on visits to LiveInternet and Google Analytics find it important to keep track of so-called bounces. Refusal means that as soon as he got to the site using the link, the user immediately closed the window, was not interested, did not stay even for a couple of seconds, refused to view the content. The reason for the refusal may be the inconsistency of the content of the site with the request, and its low quality, and the lack of new information. Be that as it may, it is believed that 60% of bounce rates adversely affect the position of the site in the search results. The time a visitor stays on the site and the bounce rate are two of the most powerful behavioral factors for search engines.

Technologies for working with behavioral factors
Working with behavioral factors is a whole area of \u200b\u200bInternet marketing related to social, psychological criteria, target audience selection, monitoring of competitors' work. Accordingly, search engines are working towards creating technologies that allow them to accurately reflect behavioral factors in their work. So Yandex today uses, in addition to taking into account behavioral factors, also the Matrixnet technology, which, using manual assessment by real users, determines the relevance of the site. That is, serious obstacles are put in the manipulation of search engines by optimizers and the creation of a high-quality Internet product is supported.

This is a collection of actions of visitors on a specific site. Login to the site, time spent, page views, “clicks” on suggested links, return to the site - all these moments can be attributed to behavioral factors. Today, search engines show a strong tendency, focusing on behavioral factors when ranking sites, which means that their analysis is becoming a very significant part of SEO optimization. Despite the fact that there are not even ten factors as such, search engines and Yandex and Google prefer to take into account behavioral factors when forming a ranking algorithm. That is, sites with good traffic, attracting unique users, convenient and well-structured win the competition, if other optimization requirements have been respected.

The article is not mine, but I think it will be useful for webmasters, I myself use this site and am very pleased with the traffic to my site, and most importantly, everything is for free.

Found a free and very good way to increase website traffic. I read reviews on the Internet for him, some praise it, some vice versa. But after climbing a little in the settings, I realized that the method is very good. It will not give an influx of new visitors (although maybe new visitors will appear), it will simply raise our site in the eyes of search engines, and already search engines will raise our site in the search results. And if the issue is normal, then the influx of new visitors will be greater.

I want to warn you right away, register here Link to put everything on the machine is NOT ALLOWED! You can get a search engine BAN. Therefore, we work step by step and carefully.

First of all, we need to register. Registration requires your website and mailbox. After confirming your registration via mail, you can log into your account.

On the main page, you will see your site added to the system. It is necessary to highlight it, and pause it so that loans are not wasted and misused.

Next, go to the project settings: (wrench in the picture)
1- The limit for spending credits per day - by default it costs 30, for the first few days this is a normal amount. You can gradually increase the limit. If you set a large limit right away, search engines will notice the influx and may find it unnatural. And this is very bad.
2- Title - the name of your site.
3- Url address - the address of your main page.
4- Keywords - it is necessary to select such keywords by which they find your main page in search engines. For all keywords that you add, your site should be in the search. Using these keywords, the programs will find your site and go to it. If your site is not available for this request, it is better to remove the keyword. Each key on a new line.
5- Search engines choose only those where your site is located. You can view conversions from search engines through the metric. Priority should be set approximately. For example, more people visit the site through Yandex than through Google, respectively, set the coefficient to 1 and 0.8 (the values \u200b\u200bare approximate, they are different for each site).
6- HTTP_REFERER'y - addresses of sites where there is a link to your resource. For example: on the Link page there is an open link to my page, I pasted this link into the field. Now the program will move from this page to mine. Incoming links must be permanent, no script. Incoming links can be checked through the Yandex webmaster. Each address is on a new line.
7- There is no need to hide the source of the visit.
8- Language - Russian, English.
9- Display time - Preferably 45 seconds (1.5 credits). The heavier the site, the longer the time. With a short time, the site does not have time to load, and the impression is not counted by the counters.
10- Show only unique.
11- The interval between impressions. If you set it to 0, then impressions will occur as soon as possible and you will get an influx. It is better to set from 50 to 900 seconds, other parameters are possible. The main thing is to distribute visits evenly.
12- You can set any impressions per hour. But since our impressions are regulated by time, I put 0, that is, without restrictions.

We apply this setting, and unpause.

The same method must be applied to the internal pages of the site. Look through the LiveInternet statistics of the website login page. Select the most popular ones and in step 3 insert the address of the internal page, the next steps for the new address must be performed for the new address. Also select keywords, http refs.

You can earn credits using a free program download here Link Download it, install it. Next, you need to update the program, for this we download the update package download here https://www.dropbox.com/s/ibi81jucb5ykcr6/update_1_0_2.zip, and copy the files from the archive to the folder with the installed program, agree to replace the files. When you first start, you need to enter the email used to register your account. We launch the program, surfing sites will begin. Credits will be awarded for each viewing.

Another way to earn credits is to post your referral link in social media profiles. You can also write a post about the system and get credits for referrals.

We wish you good work.

Hello, blog site visitors! We continue to consider the services of free website promotion and attracting an audience (target) to the sites, today is a review of Livesurf.ru autosurfing. A relatively young project, the web service was started by little-known in 2008, but gained popularity thanks to constant development and modernization, because the number of users is 260,000 participants.

Webmasters are offered expanded potential for website promotion, the practice differs from the classic autosurfing. The discrepancy in the approach lies in the provision of organizing not the usual, standard visit to one page specified in the settings n-th number of times per day, but in obtaining an order of magnitude of tangible result for the counters.

Thanks to the local algorithm, the user will customize the views of several pages of one resource, having received a full-fledged session as a surfer without auto-transitions, we are talking about worthwhile behavioral factors: imitation of human behavior, scrolling with a mouse is not. The trick is different, read the material to the end.

I note that after studying the proposed instructions, the user will extract a positive result. In this sense, beginners will benefit from a local blog made at the level of competent articles devoted to working with general issues of website promotion plus SEO promotion.

Features:
Livesurf.ru offers registered publishers three account statuses: Minimum, PRO and Advanced VIP, which affect the number of sites and credits taken out in the surf program, but at the same time expand the optimization that increases the quality of the desired traffic.

Improved statuses are not life-long, they are bought for a required period of 1 month or more for credits accumulated when using the program and partnership deductions, or money. The latter option entitles you to a discount when paying for more than 2 months, 1 gets it as a gift, and so on up to the advantageous 6 + 6 format.

Earnings on the affiliate program and setup

The resource does not redeem credits from surfers, free website promotion or purchase of an improved status. It is allowed to receive passive earnings from active partners with payment of 20 rubles for each attracted. As soon as the referral gains 10,000 impressions in surfing or pays for services from 20 rubles, then the inviting participant gets money into the account. The minimum withdrawal amount is 100 rubles. are transferred on Mondays to Webmoney WMR and plastic cards Visa / MasterCart.

An interesting feature was the experience and level, interconnected status with the partner, daily bonuses for visiting the Livesurf service, reminiscent of the RPG genre. The level depends on the total amount of accumulated Experience, which is earned by the surfing program, voting in arbitration, everyday bonuses or a banal purchase thereof.

But you can also lose experience, the reason is not visiting the project for 3 days, the sanction is the loss of -10% of the acquired property. The ailment is treated, contacting the support service with a request to leave for a while, and upon returning to restore what was lost.

Adding pages initially seems confusing than, say, in the archaic "Websurf", but thanks to the presence of prompts near each setting item, the process of mastering is accelerated. Basic functions work regardless of status, sources of arrival, priority of search engines, geo targeting and HSM - the interval between sessions and advanced, for example, turn off impressions at night. Advanced accounts activate additional login pages (PRO) and SEO analysis (VIP).

The scheme that solves the issue of natural visiting is interesting (I saw this for the first time), you need to add the main domain (the nesting level is not important), and add HTTP-REFERER from the previous one to the following URL addresses, plus it is advised to attach these from Yandex and Google, disable unique IPs, thus , a continuous chain is created. The counters record non-standard 15 seconds, and the amount of the exposed session with the full viewing depth. Read on for detailed instructions on compiling natural blog visits.

\u003e\u003e REGISTRATION<<

Website promotion in Livesurf differs among similar projects in a number of interesting features, in addition to the classic direction, if desired, the publisher can "design" high-quality traffic and earn money by attracting active referrals.

Sincerely, Dzmitry Roshchyn

Limiting the speed of users who have exceeded the daily limit

I use squid3 as a proxy and lightsquid to view statistics based on Ubuntu 14.04 Server operating system. Squid authorization is used by ip. Lightsquid has a list of users who have exceeded the daily quota, it looks like this:

192.168.2.2 1742755176
192.168.2.3 1026604252
192.168.2.4 946605505

On the left side are IP addresses in the right side of the traffic volume. The maximum traffic per user is set in the lightsquid configuration file.

The following bash script converts the lightsquid file into a squid list:

#! / bin / bash # Variables path \u003d "/ var / lib / lightsquid / report /" `date +% Y% m% d`" /. overuser "# Path to the overuser file # Body of the script if [-f $ path] # If file exists then grep -oE "\\ b (1,3) (\\. (1,3)) (3) \\ b" $ path | grep -v "#"\u003e / tmp / over # Select only ip addresses from the file if [`grep -vcf" / etc / squid3 / nolimit "/ tmp / over` -ne" 0 "] # If there are addresses that are not privileged then grep -vf "/ etc / squid3 / nolimit" / tmp / over\u003e / etc / squid3 / limit # Unload non-privileged addresses to a file for squid squid3 -k reconfigure # Apply the squid configuration fi rm "/ tmp / over" # Delete temporary file fi
At the output, we get a file with the following content:

192.168.2.2
192.168.2.3
192.168.2.4

The nolimit file looks like this:

192.168.2.10
192.168.2.11
192.168.2.12

The nolimit file contains addresses that do not need to be limited in speed if the daily quota is exceeded. Add the following lines to the squid configuration file:

Acl baduser src "/ etc / squid3 / limit"

Delay_pools 1
delay_class 1 2
delay_parameters 1 -1 / -1 6400/64000
delay_access 1 allow baduser

Do not forget to create a limit file and add to it the ip address of a network that does not belong to our network, for example:

192.168.10.10

Now it remains to add the following commands to cron:

/usr/share/lightsquid/lightparser.pl | /etc/squid3/limiter.sh

The above command starts parsing squid logs and our script. I have it every 15 minutes.

Echo "192.168.10.10"\u003e / etc / squid3 / limit | squid3 -k reconfigure

This command resets the speed limit, for me it runs at the beginning of the day at 00:00. That's all, in this way I "punish" malicious traffic consumers.

Tags: squid, lightsquid, linux, bash