If the msi file does not load what to do. Why is the slider not moving in MSI Afterburner. Uninstalling an MSI Package Using the Command Line

MSI laptop screen not working? What measures should be taken in this case? First of all, you should connect the laptop to the monitor and check if the image appears on the external monitor or not. If it appears, then, most likely, the laptop matrix or the loop has become unusable. If not, the breakdown lies in the gland itself. And here it is already necessary to consider several options.

1. Problems may arise when opening and closing the cover. If you suddenly notice that the display turns off when closed, then goes into sleep mode, and turns on during opening, this already indicates that the reason should be sought in the power button itself. She very often suffers from moisture or dirt getting inside, as a result of which it sticks. The button is most often located in upper corner, on the panel where the monitor is located, or where the cover is snapped into place. If it is damaged, it will be necessary to make a quality replacement.
2. If MSI shows, but there is no backlight, it means that the inverter itself or the backlight is defective. These two components are responsible for the backlight of the laptop. We will inspect the equipment and say whether the inverter can be repaired or not. Most often, you have to completely change the inverter or backlight.
3. If the matrix is \u200b\u200bblack, while there is or is no backlight on the sides, several options must be considered, since the hardware itself is damaged:

• 80% does not show the display if the video chip becomes unusable. This usually happens as a result of overheating.
• 5% if monitor stopped working, this may mean that the memory module, power supply, or some other component is not working. Everything needs to be checked.
• In 10%, other problems may arise. It will be possible to determine the breakdown only after we carry out a full diagnosis in the telemama service.

MSI laptop display won't turn on

If loaded mSI laptop and everything freezes.

1. Naturally, this may indicate that the problem is in the hard drive itself.
2. Also, an error may occur on the hard drive.

Nevertheless, malfunctions most often arise as a result of some kind of mechanical damage. It is far from always possible to immediately determine the cause of the breakdown. That is why the specialists of our service center first of all, they carry out a complete diagnosis. We will repair MSI CR / CX, G-series, FX / FR, Wind Top and Wind anyway.



Seize the moment: 2 weeks left until the end of the promotion! Seasonal discount 40-70%
the name of detail	The cost of components in rubles.	Installation cost (repair) in rubles.	Order service
1 year warranty	Call or press average price matrices 4500 3950 rub.	900
	2900	900
	1500	900
	1900	900
	900	900
	1100	900
Battery replacement	1800	900
	from 900 (of your choice and depending on performance)	900
		1990
Replacement south bridge	from 800-2900 (depending on the laptop model)	1990
	from 900-2900 (depending on the laptop model)	1990
	900	900
	900	900
	1100	900

Errors when installing applications from files with the .msi extension are one of the manifestations of problems with the Windows Installer service (in the Russian version, Windows Installer). Users of all versions of this OS, with the exception of the earliest, encounter a similar phenomenon. Until now, the problem with the installer is one of the common reasons why users decide to reinstall the system. Let's try to figure out how to avoid this. The reason that Windows Installer is not working may be the following:

• viral infection, and removing the virus does not always solve the problem;
• incorrect installation windows updates;
• malfunction of security software, when instead of blocking one suspicious msi file, the installation service is blocked entirely;
• changes in security policies on the computer;
• damage system files or registry for reasons not related to viruses (removal of installer components, unskilled editing of the registry, "crooked" software, malfunction hard disk etc.).

Checking the integrity of the Windows Installer structure

Windows Installer represented by the following components:

• file C: \\ Windows \\ System32 \\ Msiexec.exe - directly by the installer application itself;
• the file C: \\ Windows \\ System32 \\ msi.dll - the Windows Installer library;
• the Msiserver service, whose settings are stored in a registry key.

Before diagnostics, it is important to make sure that both of these files are present in the system, that the above section is in the registry and that its parameters have normal values \u200b\u200b(the values \u200b\u200bcan be viewed in the registry of a similar, workable system). Also open the list of services (press Windows + R and enter services.msc in the "Open" line of the "Run" application). Search for "Windows Installer" and make sure it starts. If the files are missing, copy them from another system of the same version or from the installation disc. If the registry key is missing or damaged, transfer it from the production system as well. To do this, on a working computer, start the registry editor (C: \\ Windows \\ Regedt.exe) and find the above-named section. Expand the context menu of the msiserver folder by right-clicking and click the "Export" item. Save the file in .reg format and transfer it to the problem machine. Double-click this file and confirm your consent to add data to the registry. Reboot your computer. If the Msiserver service still won't start, check if the RPC (Remote Procedure Call) service it depends on is running. You can re-register the installer files and restart the service using a set of special commands in the command line. For convenience, you can create batch file: paste the action set into notepad and save as .bat extension. To run the file, just double click on it. To make the changes take effect, click on the desktop and press F5.

Checking security settings and access rights

Windows Installer may not work also due to the fact that it is blocked by security software or operating system no required rights. First, let's figure out the software. If you have an antivirus installed, temporarily disable it. Each product has its own disabling methods, but most often this is done through the context menu of the antivirus icon in the system tray. Now let's get into the rights. Open the context menu of Msiexec.exe and expand its properties. Look at the list of groups and users on the Security tab. Among them must be "System" and the service "Trustedinstaller", and the latter must have full access to the file and be its owner. The system must have "read" and "read and execute" rights. The Trustedinstaller service first appeared in Windows Vista, therefore, in Windows XP, full access must be granted to the system. Everything written below applies to versions released after XP. To check who is the owner of Msiexec.exe, click the Advanced button on the same tab. In the next window, expand the "Owner" tab. Take ownership of the Trustedinstaller service if specified otherwise. If it's not in the Change Owner To list, click the Change button, followed by Other Users and Groups. Enter Trustedinstaller in the "Enter names ..." field, click "Check Names" and OK. Return to the previous window. On the Effective Permissions tab, assign the required rights to the Trustedinstaller and the system. The msi.dll library should have exactly the same security settings. Now let's check if there are any restrictions for the System user to access the following:

• system drive (usually drive C);
• temporary folders (these are C: \\ Windows \\ Temp and C: \\ Users \\ Current_user \\ AppData \\ Temp);
• folder C: \\ Config.Msi;
• folder where the msi file from which you are trying to install the program is located.

The system must be given full access to all these objects. This is done in the same way as we discussed above. After these operations, in most cases, the problem with the installer is successfully solved. If our advice did not help you, the cause of the failure lies in something else and specialists should already deal with it.

After installing MSI Afterburner, users often observe that the sliders, which in theory should move, are at their minimum or maximum values \u200b\u200band cannot be moved. This is perhaps the most common problem with this software. Let's figure out why the sliders don't move in MSI Afterburner?

After installation mSI programs Afterburner, this slider is always disabled. This is done for security purposes. In order to fix the problem, go to "Settings-Basic" and put a tick opposite Unblock Voltage... When you click "OK", the program will be restarted with user consent to make changes.

Video card drivers

If the problem persists, then you can experiment with the video adapter drivers. It happens that the program does not work correctly with outdated versions... In some cases, new drivers may not be suitable. You can view and change them by going to "Control Panel-Task Manager".

Sliders are at their maximum and do not move

In this case, you can try to fix the problem through the configuration file. To begin with, we determine where we have the folder of our program. You can right-click on the shortcut and see the location. Then we open "MSI Afterburner.cnf" using notepad. Find a record "EnableUnofficialOverclocking \u003d 0", and change the value «0» on "1"... To perform this action, you must have administrator rights.

Then we restart the program and check.

Sliders are at minimum and do not move

Go to "Settings-Basic"... At the bottom we put a mark in the box "Unofficial overclocking"... The program will warn that manufacturers are not responsible for the consequences of changes in the card parameters. After restarting the program, the sliders should be active.

The Power Limit and Temp sliders are not active. Limit

These sliders are often inactive. If you have tried all the options and nothing helped, then this technology is simply not supported by your video adapter.

The video card is not supported by the program

MSI Afterburner is designed for overclocking cards only AMD and NVIDIA... There is no point in trying to overclock others, the program simply won't see them.

It happens that cards are partially supported, that is, not all functions are available. It all depends on the technology of each specific product.

The installation of an application or program on a computer is not always successful.

When trying to install a software product on a computer running the Windows 7 operating system, a Windows Installer package error appears.

Reasons for the error

Read also: Everything About NET Framework for Windows 10 Download Methods, Installations and Common Errors

Before trying to fix a problem, you need to know the exact cause of its occurrence. The main reason for the error is the restriction of access rights.

In other words, when the installation file is launched, the system cannot determine if the user has sufficient rights to run.

The "Windows Installer package error" message is often accompanied by numbers and letters. This data points to those folders to which the user does not have access.

Also, the reason for the error may be the absence of several files in the installation program.

Some files can be destroyed by antivirus software, mistaking them for malware.

If the application was downloaded from a pirated resource, then it is quite possible that a number of files required for correct installation were initially missing.

When installing any application on a computer, you must disable or configure the antivirus program. It is recommended to perform these actions only when there is one hundred percent confidence that the file being installed will not harm the computer.

When installing, which programs are the most common error messages?

Read also: How to change the type of Windows network: Instructions for all versions (7/8/10)

A Windows Installer package error appears when installing files with the MSI extension, as well as programs such as Java and emulators.

In a message containing an error text, if installing Java, there is a numeric code - 1721. It indicates that the installation process has failed.

The reason may be hidden both in the lack of rights to install, and in antivirus program... In order for the installation of files to become feasible, they must be added to the list of exclusions in the antivirus settings.

If, after that, the error remains the same, the problem lies precisely in the system's permission to install the file.

Installing the iTunes application has its own characteristics, which will be discussed below.

ITunes Unable to Install - Windows Installer Package Error

Read also: iMyFone TunesFix: the solution to all kinds of errors and problems when working with iTunes without losing data!

This error can occur when trying to install iTunes on a computer running Windows 7 operating system.

To fix it, you can reinstall the operating system. Or, install iTunes correctly.

Correct installation of the program is carried out in the following sequence:

• On the computer keyboard, hold down the "Windows" + "S" keys.
• In the program search window that appears, you need to enter the word "programs and components" and click on the result.

• In the list of programs, you need to find "Apple Software Update".
• By clicking on the program with the right mouse button, select the sub-item context menu "Reestablish". If you click "uninstall", then during uninstallation the message "iTunes Windows Installer package error" will appear. Then you just have to follow the on-screen prompts.

• After completing all the steps to restore the program, it should be uninstalled. To do this, you need to return to the list of programs, and already click on the "delete" button.
• After uninstalling the program, the computer should be rebooted.
• After rebooting, Ituns is installed again.

What if the problem persists?

Read also: TOP-3 Simple Ways to Clean Up RAM on a Computer or Laptop under Windows 7/10

However, the above actions do not always save you from malfunction.

If, after performing the above operations, the error remains, then the following series of actions should be performed:

1 Click right click mouse over the installation file, select the sub-item "open with".

2 Select an archiving program from the list that appears.

3 In the window that opens, run the fourth file from the top.

4 Close the archive, and try to install iTunes again.

5 The program is easily installed on the computer.

ITunes must be downloaded from the official website.

When installing Aytyuns, the Windows Installer package error crashes. To solve this problem, follow the above steps.

At the same time, you should not install system updates via the Internet. They must be downloaded from or.

This will prevent the Windows Installer package error from appearing when installing itunes on Windows 7.

Error installing files with MSI extension

As mentioned above, the error can occur not only when installing iTunes, but also when trying to install any programs whose setup file has an MSI extension.

Files with the .exe extension are installed without any problems. This is because when working with MSI files, a utility is used to download msiexec.exe.

Her refusal to work and may be the cause of the error.

If an error occurs during installation, then the reason lies in the installation file. The utility works as it should.

The error message can take two forms:

Before fixing the problem, it is necessary to diagnose the operation of the installation utility.

Diagnostics of the utility for installing files

Read also: [Instructions] How to enter Safe Mode in Windows operating system (XP / 7/8/10)

Diagnostics of the functioning of the installation utility is carried out as follows:

• Using the "Win" + "R" key combination, you need to open the system window intended for executing commands;

• In the field you need to enter the command services.msc, and confirm with the OK button;
• In the service display window that opens, you need to find the installation windows service (in this case, it's Windows 7);

• After double clicking on the service, the service configuration window should appear. All parameters must be set exactly as shown in the screenshot;

Installer is not installed on the computer.

The above problems are solved by re-registering the installation utility in the operating room. windows system... Process re-registration is carried out in the following way:

You need to open the command line, it can be opened in several ways: using the keyboard shortcut: "Windows" + "X", or by running the utility command linewhich is located in the "standard programs" folder.

In addition to these methods, the command line can be launched using the cmd.exe command in the "Run" window.

The following commands fit into the 32-bit version of the operating system:

Commands for 32-bit version

In the 64-bit version of the system, you need to enter:

After completing the entry of commands, they must be confirmed by pressing the Enter key. After confirmation, the computer should be restarted.

The command line is launched as administrator. The command line not only scans the computer for damaged files, but also replaces them with whole ones. This requires the PC to be connected to the Internet.

After scanning and replacing files have been completed, you should restart your computer. After rebooting, you need to try to run the installation file with the MSI extension.

In addition to the utilities built into the system to restore the installer, Microsoft offers a third-party utility. It can be downloaded from the official website of the corporation.

It is worth noting that it works on Windows 7, XP, Vista.