Firmware for android prestigio. Flashing or flashing the Prestigio MultiPhone. Installing custom firmware

In this section of our information portal you will be able to download the firmware for phones Prestigio MultiPhone with Android 10.0, 9.0, 8.0 / 8.1, 7.0 / 7.1, 6.0.1, 5.0 / 5.1, 4.2.x, 4.1.x, 4.0.x. Official original firmware for Prestige Multifon smartphones on our information portal.

Program for Prestigio MultiPhone firmware

Also here you can find and download the program for flashing your Prestigio MultiPhone smartphone. All torrent files are equipped with detailed instructions by firmware phone Prestigio MultiPhone in Russian, a video that will help you easily change operating system your smartphone and a video review of the model of interest. To download custom firmware for your phone, you need to select the model you are interested in and leave your feedback, after that you can download the MIUI 10, MIUI 9, MIUI 8 firmware for Prestigio MultiPhone from Android.

Now we can download firmware

Today Prestigio tablets are very popular devices. However, many users often have problems with them. Usually these problems are associated with the functioning of software, for example, audio player, launcher, 3g module, and so on. In this article, we will look at how to flash a Prestige tablet.

Prestigio tablet firmware

At the moment, there are two main ways of flashing Prestigio tablets. The first way is through personal Computer or laptop.

1. In order to carry out the firmware, you will first need to fully charge the tablet.
2. Then download the russified firmware archive from the Prestigio website. Extract the files from the archive after downloading it.
3. You just need to run the firmware, while connecting your tablet to your computer in advance.

The second way to flash the Prestigio tablet is carried out directly - through the OTA service.

1. In order to carry out the firmware in this way, you need to connect the device to the Internet. Next, go to the "Settings" section in the tablet and in the "About device" tab, click "System updates".
2. You will be prompted for firmware to download.
3. Accept the file and follow the prompts that appear on the screen. In general, installing the firmware in this case does not differ from installing it via a personal computer.

We remind you that some firmware that you can find on the network can harm the device.

How to flash Prestigio Multipad?

There are no custom firmwares for updating the Prestigio Multipad tablet, so you should think about how to flash it using the official software. Firmware for tablet computers is not universal, if one is suitable for a certain model, it does not mean that it is suitable for another.

Tablet firmware

1. Go to the official website of the company and download the firmware version compatible with the tablet model (for example, you can use this link - prestigio.com). It is worth considering that you can only flash your tablet with a version that is newer than the existing one.
2. Before starting, you need to charge the device, turn off and remove the SD card. While holding down the volume down key with a needle, press the Mic / Reset button in the microphone. Now, while holding down the volume down, it follows with via USB connect the device to the computer. When the computer says that the software is not installed, you can update the driver available on the PC. The new RK29 Device hardware will appear.
3. Next, turn off the tablet, run the RKBatchTool program (specify the path to the firmware in it) and reconnect the tablet to the PC in a known way.
4. Then you need to press the Upgrade button in the program, and the firmware will start.
5. At the very end, you should disconnect the tablet from the PC and turn it on to see the result.

All interesting information about tablets can be found in the corresponding section of our website -

How to flash Prestigio?

Prestigio is a trademark of ASBIS consumer technology. This company is little known on russian markethowever it is one of the largest suppliers of IT products in the world and represents the interests of such well-known brands as Intel, AMD, Samsung, Microsoft, Toshiba, Dell, Acer, Hitachi, Apple, etc. The launch of sales of a line of tablets of its own production began in 2011. Since then, new tablet models and new software have regularly appeared.

Since the software becomes outdated very quickly, it needs to be regularly improved. In this article we will show you how to flash your Prestigio tablet to keep up with the times.

First of all, you will need to decide which firmware you want to use on your tablet: official (from the manufacturer) or unofficial. In the latter case, you run the risk of losing the warranty on your device, but this does not bother many users.

Depending on which firmware you will be installing, you have two installation options

Automatic over-the-air update

This option is suitable for those users who do not want to complicate their life too much and prefer that all updates on their device are made in automatic mode... In order to connect automatic update software, follow these steps:

1. Connect mobile or wireless Internet on your tablet. For settings mobile internet go to Settings - More - Mobile network and check the boxes "Data transmission" and "Internet roaming". To connect to a wireless wi-Fi networks go to Settings - Wireless & networks - Wi-Fi and turn the switch to On.
2. Go to Settings - About device - System updates and turn the switch to On.
3. The phone will automatically search for available updates for your tablet model and, if found, will offer to update the software.

Installation from a computer

1. Unzip the firmware file for your tablet model to any folder on your computer.
2. Connect the USB cable to your computer.
3. Hold down the volume up button and at the same time plug the other end of the USB cable into the corresponding connector on the tablet.
4. Without releasing the volume up button, press the tablet power button.
5. Install the tablet driver on your computer if it doesn't happen automatically.
6. Run the RKBatchTool.exe file.
7. Under Connected devices, the number 1 should be enclosed in a green square.
8. Select the firmware file and click the Restore button.
9. Wait until the end of the firmware process and disconnect the cable from the tablet.

Whatever firmware you are using, before flashing the tablet and after successfully installing the updated software, be sure to do backup device data.

The Prestigio tablet is a fairly inexpensive device that works under android... Despite all its advantages, at some point it starts to slow down during work. One solution to this problem is to roll back to factory settings and delete all installed applications... However, this does not always help. In this case, you will have to reinstall the system. But how to reflash prestigio tablet? Let's try to answer this question.

How to reflash Prestigio Multipad

When starting to reflash your Prestigio Multipad tablet, first of all you need to check the version of its assembly. To do this, select the "Settings" item, go to the "About tablet" tab and click on the "Build number". Why is this done? In order for the device to maintain its performance. That is, you can install only the system that at least matches the build number. If you use the firmware version lower than the one installed on the device, then it will simply fail.

The next step is to go to the manufacturer's official website. There are many firmware files for different devices. You need to choose the one that suits your particular Prestigio, taking into account the above condition. Then this file is downloaded.

Having received the document, it must be unpacked into the appropriate folder on the computer. This file contains the following:

• version for 64-bit system;
• version for 86-bit system;
• assembly image;
• leadership;
• utility that allows you to reflash your tablet.

Now it's the turn to work with the device itself. First you need to fully charge it, turn it off and remove the memory card from the slot. The next step is to hold down the "-" button on the volume control and simultaneously press the " Reset»On the back of the device. This can be done with a needle.

After that, while continuing to hold down the volume down key, the tablet is connected via a USB cable to the computer. On the monitor in the corner of the screen, the message “ Software the device has not been set". If this information is not displayed on the computer screen, you should repeat the above steps, while changing the USB port.

As soon as this message is displayed, go to the computer device manager by selecting " A computer - right button - Properties - Device Manager". At this point, you must find the section " Other devices". It displays a yellow icon «!» ... By clicking on it with the left mouse button, select the item " Driver"and Refresh". Then just perform the actions suggested by the system.

Depending on which one is installed windows system (32- or 64-bit), the corresponding path to the folder “ Drivers_x32" or " Drivers_x64". After clicking on " Install driver"Appears in the task manager new section « RK29 Device».

The tablet is disconnected from the computer.

The latter runs the utility RKBatch Toollocated in the Tool folder. Then the path to the firmware file is indicated. Then the tablet is reconnected to the computer. The green indicator at the bottom of the utility should light up. If it doesn't, the tablet should be connected to a different USB port.

At the end, the button " Upgrade". When the utility reports successful implementation operations, the tablet can be detached and turned on.

You will also be interested to read the articles:

How to reflash Prestigio Multipad 4

Reflashing the Prestigio Mutlipad 4 tablet is no more difficult than mentioned above. To do this, you also need to download the firmware file, which is sent to the root directory of the SD card. Then cashing in «+» on the volume key and the power button of the device. Both of them are held for about 3 seconds. After the green robot appears on the screen, you need to press the power button again. In the recovery menu to go to “Apply update from sdcard " need to use «-» on the volume key. Exposed selection by button «+» ... In the same way, one should choose update.zip.

After the end of the update, it remains to click "Reboot system now".

Conclusion

Reflashing a Prestigio tablet is a time-consuming task rather than an effort. The main thing is to always remember that the firmware file must correspond to the model of the device and the build number.

Firmware video Prestigio Multipad 4