Earpods don't work in one ear. How to turn off the headphones function in an iPhone. The headphones do not work with iPhone, iPad, or iPod touch. If the buttons on the Apple EarPods do not work. AirPods problems - won't connect to Mac

Details Last Updated on 04/02/2017 10:16 AM Posted on 4/21/2016 08:38 AM? The question is quite popular and no less important, because at one time or another, every lucky person who has a phone from an "apple" company has to face various kinds of problems, and defects in the work of headphones are no exception. Based on experience, we can say that, on average, this problem occurs when the EarPods are used for about six months or a year, possibly earlier.

How sound is delivered

In the standard form, that is, without changing the "factory" settings between the headphones, the sounds are distributed among themselves in "stereo" mode. Stereo mode, it feeds music from a specific instrument to a more suitable earphone for this sound. This was done in order to increase the effect of the presence of music and the effect of immersion in the atmosphere of a song. Thus, for example, listening to music with a violin and a voice together on broken headphones, you may not receive some of the sounds from the violin, or vice versa, from the voice. Why? Everything is very simple, because music from the violin is transmitted to one earphone, and the voice to the other, respectively. Agree, the pleasure of listening in this case will not be very much. But, you can offer you to listen to music on one headphone, only without the "stereo" sound mode.

IPhone earphone does not work what to do, because the phone was bought recently

On this part, you can make one interesting note, because very often, in most cases, it is the right earphone that fails, since it has a microphone-headset for communication, and also below, there is a button with a change in the audio volume level. And this happens with almost all headphones from iPhones, after about a year of active use. We will describe a way to solve this popular problem, but it is worth noting that it will be possible to count on an exact solution to the breakdown only if one earphone is in working order and is not physically damaged.
How to listen to music with one earbud?
It is quite comfortable to listen to your favorite songs with just one working earphone, and even watch videos or movies. This can be done by turning off the "stereo" sound in the phone settings, with the help of some simple manipulations. After turning off the stereo, all sounds will be sent to only one working headphone, without the participation of the second, "deceased" one. To enable a single sound feed, we need to enable the "mono" sound mode. You need to do the following:

• Go to phone settings and open a tab called "Universal Access"
• Switch to the mode of operation we need (mono or stereo)
• After that, it is advisable to restart the phone

Long before the start of their sales, they attracted the attention of users.

After the product from the Apple concern was released, buyers began to talk about the discovery of several problematic parties, which are quite easy to fix on their own.

What to do if AirPods or one of them are not working?

If sound disappears in wireless headphones, then experts advise you to pay attention to the following signs:

• is included on iPhone Bluetooth;
• the need to overload the gadget;
• low charge.

To get rid of the problem, you should try setting up the headset to work through a single earpiece in case telephone conversation... To decide which right or left earpiece will be used during a conversation is through the Bluetooth menu.

You can easily repair a gadget when only one earpiece is out of order, if:

• put AirPods in the charging container and wait 10-15 seconds;
• turn Bluetooth on and off several times in a row;
• reload wireless headphones;
• if one of the earbuds has been replaced, then select the “Forget device” function in the menu and register it again.

If the sound is too quiet or no sound

Sometimes one of the AirPods becomes very quiet. This problem needs to be corrected as follows:

• recharge both earbuds or one of them;
• clean the nets from lint and dust;
• clean the entire disassembled headset with a soft brush;
• disable the automatic ear detection option;
• check the volume connection in the main gadget.

Photo: Auto-detect ear function in AirPods

If all the steps have been passed, and the sound still does not suit you, then it is strongly recommended to take the wireless headphones to a branded service center.

1. Check for debris in the headphone port on your iPhone, iPad, or iPod touch.
2. Check the headphone cable, jack, remote control and earbuds for damage such as wear or breakage.
3. Inspect the mesh of each earbud for debris. To remove debris, gently brush all holes with a clean, dry soft brush.
4. Connect the headphones securely to the device. If your iOS device is protected by a case, remove it to ensure a secure connection.

If the problem with the headphones still persists, follow the steps below.

In almost every case, the equipment itself is damaged. If something is placed in the headphone jack, removal can be attempted by several different ways... Most often, these problems occur in the hardware itself. Typically, something is interfering with the headphone jack, triggering a sensor, or the headphone jack itself is inoperative. If the headphone jack is broken, there is very little the owner can do other than replace the phone. If something needs to be knocked out, on the contrary, there are a number of useful methods for removing the obstruction.

If you don't hear any sounds or only the left or right earbud is working

1. Adjust the volume using the volume buttons on your iOS device or use the Volume slider on.
2. Try connecting a second pair of headphones to see if replacement is required. If the second pair works, contact the manufacturer of the first pair to find out if you need a replacement. If the second pair doesn't work,.

If the device does not exit headphone mode

If the headphones are disconnected from the iOS device and the Headphones volume indicator continues to display on the screen, see.

Headphone jack problems

Almost every headphone jack problem is a problem hardware... When the process is complete, users just need to press the power button again. The headphone jack can be checked by looking through the hole with a flashlight. Those who check for hardware failure should carefully inspect the headphone jack for debris. Such debris may include food, dirt, or a broken part of the headphones. Be careful when trying to remove debris from the headphone jack.

If the microphone doesn't work

1. Make sure the headphones have a built-in microphone.
2. Check if the microphone is blocked by small debris, lint or plastic wrap.
3. Try connecting a second pair of headphones to see if replacement is required. If the second pair works, check with the manufacturer of the first pair to see if you need a replacement. If the second pair of headphones doesn't work,.

If the remote control still does not work, contact

If the buttons on the Apple EarPods do not work

Such efforts can inadvertently exacerbate the problem. If the obstructing element cannot be removed, it may have to replace the phone, so it is often better to try to remove it than just replace the phone. However, if the owner of the phone is willing to take the risk, there are several methods you can try. This will destroy the feather in the process.

One attempts this cleaning method by inserting the cartridge into the headphone jack, twisting the cartridge back and forth, trying to dislodge any debris, and then shaking the phone until the debris is gone. Users should not push too hard or penetrate too deep into the headphone jack, otherwise it may cause further damage. Instead, users should try a different repair method.

Ruler iPhone smartphones includes several generations of high-tech functional devices designed for comfort and versatility in use. But the special approach of the developers to the creation does not at all guarantee that the devices will last forever without any breakdowns and failures. For example, the specialists of the Ay-Yai-Yai service quite often face a problem when the "Headphones" mode is turned on in the iPhone without headphones. And this problem can bring a lot of unpleasant moments to the owner and his interlocutors.

You can also use a can of compressed air to clean a broken headphone jack. This will often work like a magic fix, even if nothing is blocking the headphone jack. This compressed air will blow and loosen trapped debris, helping it find its way out. Start by pulling out the headphone jack from the outside, and then gradually work into the jack itself.

Moisture in one breath can damage the headphone jack, which can become permanent. Tweezers can also be used to clean up such abstraction, provided they are small enough to fit into a tiny headphone jack. One should have an idea of \u200b\u200bwhere the obstacle lies before attempting such a procedure.

Reasons and solutions

The main problem with the specified headset problem is that the user cannot answer calls in the normal mode, since he cannot hear the interlocutor. Basically, the gadget simply cuts off the audio to the external speakers, sending signals to the bottom connector. In this case, the headphones themselves are not connected, although the iPhone is working in connection mode.

Trying to use the tweezers can damage the sides of the headphone jack, so extra care is recommended. However, if paying for repair or replacement is not a viable option, self-assembly may be the only option. In this case, one attempt to disassemble the entire phone removes the obstructing element and then reassembles the phone.

This approach is not recommended. It is possible that nothing is interfering with the headphone jack, but the jack itself is not working. This can be caused by a number of things. This is one of the most common methods for breaking headphone jacks. In most cases, the owners of these phones cannot understand how their phone got wet.

It is logical to assume that the main reason for the breakdown is the operation of the headset jack. And in 90 percent of cases this is true, although the causes of the malfunction may be as follows:

1. Mechanical impact... As a result of such interference, the integrity of the connector may be violated, due to which it will not work correctly, recognizing the connection, even if it is not there. It will be safer to install a new part in place of the damaged one.

When wrapping the headphones in this way, if the headphones are plugged into a wall outlet, this pushes the plug, straining it to move in the direction of the weight of the headphones, thereby gradually pulling the headphone jack off the logic board. These parts cannot be removed and replaced separately. This creates a serious inconvenience, since the phone will no longer perform its main function without sound. Such damage restricts the use of this smartphone to use applications and the Internet without sound or sending text messages.

They cover their parts and labor for a lifetime warranty. Again, users can try to fix the phone themselves, but this is not recommended as it can be extremely difficult. The tips mentioned above must be followed with care and caution as they can damage the headphone jack without repair.

2. Common pollution. The headset output may malfunction if it contains a large amount of dirt particles that prevent normal work systems. In this case, routine cleaning of the connector will help.

3. Also, the display of the iPhone system constantly in the headphones is possible if water gets into the lower input of the iPhone. To restore it, you need to hand over the gadget to specialists for special cleaning with the removal of oxidation products.

Those looking to repair a damaged phone should exercise patience, care and concern when trying to repair their phones. While a mistake can be disastrous, the cost of repairs makes that risk. There is no specific solution or reason for this problem. It could be a headphone issue, software glitch, or hardware glitch.

Try plugging in your headphones and then gently plug it back in. Most of the time this would fix the problem. But if it is not, then this is not the end of the list, keep reading. Try another pair of headphones. It's time for a treasure hunt. Then take a toothpick or any other thin thing, wrap cotton around it, and then clean the port. If something is bothering the port, then there is a chance to run into a problem in the topic.

In some cases, software malfunctions can lead to an unauthorized switch to headset mode, but such breakdowns occur quite rarely and are eliminated by routine debugging or reinstalling software.

Any technique has a shelf life, and many consumers are resigned to this. In order not to shorten the already short life of devices, the owners try to be more careful in handling them, which is not always possible. The headset for listening to music is especially prone to wear and tear, because every fifth person does not leave the house without a player or smartphone, packed to capacity with tracks.

At such moments, the most offensive thing is when the sound in one earphone does not work. This nuisance does not allow to fully enjoy the trip anywhere, and in general, the mood spoils for the whole day. But what is to be done?

Headset-independent reasons

It also happens that the device itself is fully operational, and the blame is the negligence of its owner or incompatibility with the player. There may be several such options:

• loose fit of the plug into the connector;
• earwax contamination of the speaker;
• absence necessary drivers on a smartphone / PC;
• the plug is too tightly inserted (the "magic" of some laptops).

These are not all reasons explaining why one earbud does not work. But it's easiest to deal with them, which is why they are considered in the first place.

Problems with entering the nest

It would seem that the reason is pretty silly, right? But no, most often it is she who is the culprit of the malfunction. To exclude such a scenario, you need to check how tightly the plug is inserted into the connector of the reproducing device. If the headset does not fully fit into the socket, then it immediately becomes clear why one earphone does not work.

The contacts responsible for sound transmission are made in the form of rings encircling the pin. If it does not enter the connector all the way, the connection between the "ears" and the player is broken, since the elements needed to reproduce the signals do not touch each other.

However, the opposite situation exists. Some laptop sockets may not fit a plug-in headset. However, everything will work if you slightly extend the pin so that a small part of it is visible from the outside.

Lack of drivers

Why does one earphone not work when connected to a specific device? It's simple: the sound drivers are malfunctioning or not installed. Because of this, the audio equipment conflicts with the operating system of the gadget and the connection of the headset causes all kinds of trouble.

You can eliminate them through installation software, which is supplied on a disc complete with "ears" or is available for download on the official website of the manufacturer of the equipment.

Why does one earphone not work?

Among other things, the reason can be the untidiness of the owner and a simple model of the headset. If the owner of the earbuds (meaning the shape) is engaged in sports or other hard work, after a couple of months the speaker will be clogged with earwax. And it will affect the sound.

In such a case, it remains to thank only the simple design of the headset, which is easy to disassemble and clean if necessary. But it is better to monitor the state of the device more carefully so as not to face such a problem when one earphone does not work.

How do I fix a damaged headset?

If all the easy options were considered, but none of them was the cause of the breakdown, you will have to get down to business seriously. You will need to carefully inspect the cord, feel it and bend it several times at different angles near the plug or headphone speakers. Of course, if you confirm your fears, you will have to part with them, but making the device work a little longer is possible without replacing the headset.

The defective part of the old cord needs to be cut, stripped and twisted with the rest of the whole cable.

Wireless device

The above measure should help in the case of a damaged wire (if one earphone does not work). How to fix a bluetooth headset? Unfortunately, the answer is not encouraging. Such a technique is most often not intended for self-repair by the owner, and something can be done only if there is certain knowledge in this area. Therefore, you have to replace the device or contact a specialist.

Most often, such a problem overtakes (one earphone does not work), but due to the high cost, any such breakdown is solved by warranty service centers. The same applies to other headsets released under well-known brands, so you shouldn't despair. But if the purchase was cheap, replacing the device with a new one will be much easier and faster.

The headset for the IPhone is always original and high-quality details that can simplify your work with the device. The EarPods themselves and the connector for their connection have excellent sound quality and are made of durable materials. However, sometimes users still face problems during operation. Below is the detailed description Steps to follow if the headphones on your iPhone don't work.

Why isn't the headset working?

The malfunction may be due to software, hardware or mechanical reasons:

• The headphones may have broken, not the connector. Try connecting the headset to a different branded apple device and check their performance. If the sound is still reproduced badly, you should replace the headphones;
• Ingress of third-party elements into the connector. The headset stack has quite big size, therefore, over time, dust particles and water can get into it. The connector should be cleaned regularly with a toothpick or fine tweezers;
• Audio codec problems - incorrect work microcircuit, which is responsible for all the elements that regulate sound reproduction in the phone. As a rule, a broken codec is also accompanied by bad job auditory and spoken speakers;
• Incorrect phone setup. This reason concerns those users who have Jailbreak. Try to remove any tweaks you are not using. If all else fails, restore your device to its original state;

No sound on phone in headphone mode

Do not exclude the possibility of a breakdown on the operating system side. Your connector may be fine. Before repairing, failures in the OS should be excluded. First of all, restart your device and connect your headset (you can try connecting other headphones).

After cleaning the connector, change the phone settings. Previously, AirPlay could send audio to speakers other than headphones. Check AirPlay data. Click on the appropriate button in the Control Center window. In the window that opens, click on "IPhone" then on "Finish":

Now configure your Bluetooth options correctly. The phone may have been sending audio to another device using bluetooth technologies and AirPlay. Open "Control Center" and click on the Bluetooth icon, then disconnect any established wireless connections.

Update operating system to more new versionif the firmware version came over the air. As a rule, developers release new builds to prevent bugs and crashes that appear.

We change the connector ourselves

If the previous methods did not help, you need to replace the iPhone headphone jack. You can do this type of repair yourself within 30-50 minutes. To do this, you will need a screwdriver to disassemble the iPhone, spudgers, tweezers, a pick, a suction cup, and a piece of a new headphone jack.

Discover back cover phone, detach the cables from motherboard, move the display aside. Detach the speaker (bottom right). Remove the two screws to expose the Lightning connector assembly.

Detach the antenna with a plastic spatula and remove it by gently grasping it with tweezers.

Use pliers to remove the connector and replace it with a new part. After that, you need to assemble the phone.

Replacing the audio codec

In some cases, replacing the connector does not work. This may indicate a breakdown of the main audio codec. If your iPhone has prolonged sound problems, the chip should be replaced.

Extract system board from the device. The location of the codec is shown in the figure:

You can extract the codec by heating it. Use a special hair dryer and tongs. For better view you can take a magnifying glass.