How to install a new washing machine correctly. Self-connecting the washing machine. What will happen with the guarantee

1

A washing machine, especially an automatic one, is an absolutely necessary thing in the household. You just need to load the laundry and add the detergent - and then the smart device will do everything on its own.

In order for the machine to work for a long time and reliably, it is required to provide it with all the necessary conditions. Therefore, the moment of installation is very important. Correct connection will ensure high quality washing and trouble-free operation.

You need to think about where and how to put the car before buying. Its dimensions, power, type of construction are determined not only by the wishes of the owners, but also by the availability of opportunities in the apartment.

Prerequisites for installation

The easiest way is to install the washing machine near the water and electricity connections. In this case, there will be no problems with lengthening hoses and electric cables.

The aesthetic component and ease of use should not be ignored either. For small apartments, the question arises whether the equipment will fit in the place intended for it.

Choosing a place: in the bathroom or in the kitchen

Most washing machines find shelter in the bathroom. This is the most logical choice of location, since there are usually water pipes and sewers. Also appliances will be hidden from prying eyes.

If there is not enough space in the bathroom, you can consider connecting in the kitchen or even in the hallway.

What you need to pay attention to:

• The floor must be vibration-resistant.
• You may have to lay communications over a long distance.
• When measuring distances, you must take into account possible unevenness of the walls. Just in case, the nominal dimensions of the machine should be at least one centimeter smaller than the available space.

Water connection

Machine wash, like any other, requires water first. The following requirements are imposed on the water supply: the pressure in the pipes must be sufficient, and the water must be clean. If these conditions are not met, you can put a pressure boosting pump and filter the water.

A separate tap must be built into the pipeline to shut off the water supply to the machine. This greatly reduces the likelihood of leakage.

Energy supply

The washing machine is powerful. Therefore, the electrical cables and sockets available in old apartments are usually not suitable for it.

Floor quality

Serious requirements are placed on the flooring. First of all, it must be firm and strictly horizontal, without obvious irregularities. In addition, the coating will have to resist vibration from the rotating drum.

If the floor in the apartment does not meet these conditions, it must be reinforced at the installation site.

Positive air temperature

In an apartment, the washing machine is always warm. However, in a suburban private house or technical room, a prolonged shutdown of heating is possible. This is completely unacceptable! Water always remains inside the washing machine after washing. In cold weather, she will inevitably freeze and rupture the hoses or even the pump.

Installation sequence

When a new machine arrives from a store, the first step is to free it from packaging and shipping fasteners. Then it is connected to all the required communications and the height of the legs is adjusted. The unit is then ready for the first wash.

Removing the shipping fasteners

During transportation, moving parts are secured to avoid damage. If you do not remove these fasteners (bolts, staples, bars), then when turned on, the mechanism will inevitably fail. It is necessary:

• unscrew the bolts;
• remove plastic spacers;
• remove the staples.

In place of the bolts, decorative plugs are inserted that come with the machine.

Water connection

Cold water is supplied through a flexible hose that is included in the delivery. It is not recommended to make a completely rigid connection, since through it vibration will be transmitted to the pipe system and gradually destroy them.

The hose is connected to the water supply through a specially cut-in branch pipe or tee. Usually it is equipped with a mesh filter to remove coarse dirt from the water. On the machine side, the connection is made via a standard screw connection.

Draining

The easiest way to organize a water drain is to dip the end of the drain hose into a tub or sink. But this is more of a temporary solution.

Most often, the waste water is drained through a special splitter directly into the siphon under the sink. The hose must be long enough to create a loop that hangs down. There is always water in its fold, which prevents the aromas of the sewer from getting into the car.

Adjusting the feet

The drum of the machine must rotate smoothly and without distortion. For this, it is necessary that its upper plane is located strictly horizontally. This can be checked using a building level. If the deflection is more than 2 °, use the machine feet adjustment. All modern models have a threaded setting.

Do not put pieces of wood or linoleum under the legs. They can pop out during washing.

Power supply

The optimal solution is to connect the machine to the panel using a separate three-core cable, on which the circuit breaker is installed. An RCD device is used for protection against short-circuit to the case.

The socket must be grounded and mounted at a certain height from the floor level so that water does not get into it if it leaks. In the kitchen, a socket for an electric stove meets these requirements.

Video instruction on how to install a washing machine yourself

Features of installation in various conditions

When installing the machine, it is necessary to think in advance about the conditions and mode of its operation. Accordingly, you can take measures in advance to help avoid problems in the future.

In a private house

When building or renovating a private house, you can create the necessary wiring diagram for pipes and electrical cables at the design stage. If there is a dry basement in the house, washing and drying equipment is often installed there. In this case, the residents are not disturbed by noise, odors and dampness.

In the kitchen and in the hallway

The washing machine fits quite easily into the kitchen interior, although the washing process itself does not go well with cooking and eating.

It should be installed in the hallway only as a last resort.

In this case, you will have to solve many issues:

• where to find a place so that the car does not interfere with walking and opening doors;
• how to hide the laid communications (in the floor, walls);
• how to hide equipment from the eyes of guests (built-in wardrobe, curtain).

On wood floor or laminate

The ideal hard and hard floor for installation is concrete. On wooden floors, the vibration of the machine is amplified and has a destructive effect on the machine itself and the surrounding objects.

There are various options for reinforcing the floor:

• concreting a small foundation;
• arrange a solid podium based on steel pipes;
• at least put on an anti-vibration mat.

None of these methods compare to a full-fledged concrete screed, but to some extent, unpleasant vibration will be reduced.

Embedded machine installation

Built-in home appliances fit perfectly into any interior. Its wires and hoses are hidden behind the cabinets, and the front door fully matches the rest of the headset. Moreover, such a technique is more expensive than a freestanding one and its choice is not so great.

Therefore, the question often arises, is it possible to build an automatic machine in an ordinary machine? It is possible, and moreover in various ways:

• just hide under the countertop;
• install a compact model in a finished kitchen cabinet;
• make a suitable cabinet yourself, with or without a door.

Pay attention to the hardness of the base so that vibration is not transmitted to adjacent cabinets.

Installing the washing machine over the toilet

Considering the small size of most toilets, the idea of \u200b\u200bbuilding a washer into it seems strange. But some enthusiasts manage to carry out this adventure.

Of course, you should pay attention to safety measures so that the unit does not fall on your head at a crucial moment.

• The quality of the walls. If the walls are brittle, a steel structure with floor support should be made.
• Sturdy hanging shelf. It is made from a solid metal profile.
• Safety collar to prevent the machine from sliding off the shelf from vibration.
• Pull-out shelf so that the laundry you take out does not fall into the toilet.
• The height of the attachment should allow access to the toilet flush button.

It is best to place the car behind the toilet rather than directly above it. In this case, it is logical to choose a model with a minimum depth. And remember that for repairs, heavy equipment will have to be removed from the shelf and then put back on again.

Why the car "jumps" and how to deal with it

Increased vibration is characteristic of recent installed machines... But sometimes the time-tested technique starts to bounce or even move across the floor. It is necessary to determine the reasons for this behavior of the machine, until it is completely out of order.

The following options are possible:

• Before installation, the fasteners were not removed - bolts, brackets.
• The floor is not level enough, the machine is swinging.
• On the contrary, the floor is too flat and slippery, then you can put a rubber mat on it.

The easiest problem to fix is \u200b\u200bthat damp laundry curled up inside the drum into a single lump. Stop the machine, distribute the laundry inside it with your hands and continue spinning.

Factors of a technical nature are also possible. Only a repair specialist can identify and eliminate them:

• Shock absorbers are out of order.
• The springs on which the tank is attached are worn out.
• The counterweight mountings are loose.
• The bearing collapsed.

All these reasons are subject to immediate elimination, the operation of the machine with such defects will inevitably lead to its breakdown.

The installation quality of the washing machine depends not only on the connection of the equipment itself, but also on the choice of the installation location. It is quite possible for any person to correctly assess the situation, take advantage of its benefits and compensate for the negative moments. In the presence of communications, the installation process itself does not take much time. At the end of it, you need to carry out a test run - wash in an empty machine without laundry. If no abnormal noise is detected, the machine can be used.

When purchasing a washing machine, buyers are immediately interested in the possibility of its installation and are ready to pay for this service to the master. But they do not even think that it is possible to correctly connect the washing machine to the water supply system on their own, and it will not take much time and effort.

Installing the washing machine: preparation for the process

Before buying a washing machine, you need to think about the options for its location. This can be the installation of a washing machine in the bathroom or in the kitchen, and there are variations of its installation. In the kitchen, the washing machine can be installed under the countertop, and it will fit perfectly as a piece of furniture. In the bathroom - under the sink, but you need to know all the nuances.

After delivery and unpacking of the washing machine, it is very important to remove the four transport bolts that hold the drum, otherwise this will lead to its breakdown, for more details see the instructions.

We unscrew the shipping bolts before installation. There can be 3 or 4 of them.

The machine is best placed on a concrete floor, on a flat surface. For slippery surfaces, it is recommended to place a rubber mat under the device.

From this video you will learn how to connect a washing machine with your own hands to the sewer and water supply.

What do we need to connect the washing machine?

To connect the washing machine with our own hands to the sewerage and water supply system, we need an adjustable and gas wrench. You also need to stock up on auxiliary parts:

• Ball valve - 1 piece
• threaded adapter - 4pcs
• cast iron tee - 1pc
• Tape for sealing threaded connections
• Sewer pipe with a diameter of 32mm - as required
• Sewer outlet Ø110x90

How to install a washing machine?

The installation process is performed in the following sequence:

1. Sewer connection.
2. Connecting the washing machine to the water supply.
3. Electrical connection.
4. Leveling the machine

Draining the washing machine

There are three types of connecting the washing machine to the sewer:

1. Draining water into the toilet or bathroom.
2. Draining water into a siphon.
3. Sewer connection

The easiest way is to drain the water into the bathroom or sink (if the installation of the washing machine is intended for the bathroom). This requires a hose through which all the dirty water will drain. It must be fastened so that the top is 60 cm higher than the washing machine; be sure to fix the hose with special fasteners or a rope, because under the pressure of water it can fall to the floor.

It looks like a siphon under the drain of a washing machine

In order not to bother with hoses, you can drain through a siphon. A siphon with a special outlet for washing machines can be purchased at any specialty store or market. The outlet must be located above the siphon so that dirty water from the sewage system does not enter the device. This method of draining is considered the most reliable, since water cannot spill onto the floor.

When connecting the washing machine to the sewer, you can buy an additional siphon. The drain hose is connected to the device on one side at a height of 80 cm, on the other side it is introduced into the sewer pipe through a siphon. It is very important that the hose is in a straightened state, otherwise the drain will not take place.

Connecting the washing machine to the water supply

When supplying water to the device yourself, it is important to take into account the water pressure in the pipes and the level of its pollution. Filters are installed to purify the water, they will increase the service life of your equipment. The filter cuts into the water pipe using a tee.

To supply water to the washer, you can use ready-made taps to the drain tank or mixer, or connect through a tee.

There are the following options for connecting the washing machine to the water supply:

• Tie-in into the pipeline using a compression sleeve. This requires a ¾ ”hose. One part of the hose is fed to the machine, and the second to the valve, which we independently cut into the water pipe using a coupling. The parts of the coupling are shown in the figure. It is attached to the pipe with bolts; a hole is made in the pipe for the flow of water. A tap is inserted into the threaded hole, which turns on and off after each wash.
• Connect the washing machine to the water supply in a simple wayusing a tee. A flexible hose is connected to the mixer or to the water supply to the drain tank. Using a tee, the hose is connected to the mixer. This connection option is temporary, since the mixer hose must be unscrewed during washing.
• If your house has metal-plastic pipes, then a tee - fitting is used to connect to the water supply. Having cut a piece of pipe in the right place, a tee is inserted, to which a ball valve is connected.

To prevent water from flowing through the tee, seals are used. Tee, coupling, fitting, adapter, ball valve can be purchased in special stores.

You can connect the washing machine not only to cold but also hot water.

Hot water connection: how effective is it

Sometimes, making a connection to the water supply on their own, many bring the machine to hot water. For this, a tee is also used for ordinary pipes, and a tee is a fitting for metal-plastic pipes.
When connected to hot water, you can save energy, but at the same time, you need to consider the methods of supplying hot water:

1. centralized hot water delivery;
2. heating by local water heaters.

With a centralized hot water supply, its temperature is + 50 ... + 70 degrees. At the initial stage of washing, the device can accept such a temperature as an emergency and stop the whole process. Therefore, if utility organizations comply with all the norms for hot water supply, then only cold water supply is possible.

When heated by local heaters, connection to hot water is possible only with the condition of constant temperature changes on the water heater. When soaking laundry, the water temperature should not exceed 40 degrees, at the time of washing, choose the temperature based on the degree of soiling of the laundry, rinse at the lowest temperature.

Therefore, when connecting to hot water, weigh the pros and cons.

How to properly connect the washing machine to the mains?

Since we are talking about constant contact of the device with water, it is best to call a specialist for this purpose. But if you are confident in your abilities, you can do it yourself.

In this case, the following conditions must be taken into account:

• The washing machine installation should be near a 3-wire electrical outlet.
• A grounding bus must be installed in the shield, the wire must be reliably insulated.
• If necessary, use only a grounded extension cord.
• For an electrical grounding cable, use a wire with a cross section of more than 3 mm.

As you can see, knowing all the steps and rules, installing a washing machine is a simple process.

Installing a washing machine by level

In order for a new washing machine to work for a long time and flawlessly, for this it is necessary to set it strictly at a level. First, we install the washing machine in the prepared place, then take a small level and achieve the ideal location of the washing machine in the horizon line. There are support legs underneath the washing machine. Slowly twisting them, you can achieve the necessary horizontal position. In modern washing machines automatic, such legs are available only in front, the rear legs are not adjustable, so the entire leveling process occurs only due to the front legs.

It is not recommended to fit pieces of linoleum or blocks under the washing machine - this can lead to excessive vibration. A concrete floor is ideal for installing the washer. It is important to fix the adjusted support legs in the required position - for this each support leg is equipped with a lock nut. If you do not fix the lock nut, then with each wash, the legs will unscrew, as a result of which the level of the washing machine will break, and you will need to reinstall the washing machine yourself.

Installing the washing machine under the sink and countertop

In a more modern design of the arrangement of rooms, the installation of a washing machine under the sink in the bathroom has become widespread. It not only looks beautiful but also saves space.

For such a bath arrangement, you must:

• choose a special machine for a water lily sink with dimensions of 60 x 30 cm;
• choose a sink measuring 60 x 60 cm;
• install the sink so that it protrudes slightly above the machine, so water will not spill onto the equipment;
• the drain pipe from the sink should go behind the machine, not above it.

To save money, you can buy a machine and a sink immediately in the kit.

In the kitchen, the washing machine can be hidden under the countertop or placed in a cupboard where it will not be visible at all. If there is very little space in the kitchen, then top-loading machines are installed, because its width is only 40 cm.

If there is enough free space, then machines with horizontal loading of linen are installed under the tabletop.
By following all the instructions and adhering to the tips, you will know how to connect the washing machine yourself without any problems.

Correct handling household appliances is the guarantee of its long and high-quality work. Sometimes the owners of a brand new washing machine make key mistakes in operation immediately after purchase. We are talking about the transportation and subsequent installation of the unit on the floor in the bathroom, hallway or kitchen. We will learn how to secure the washing machine during transportation, and what is the secret of correct installation on a floor made of wood or tiles.

Training

The first thing to do before shipping is to secure the drum. Any basic configuration of the unit has special bolts that secure the drum. After transporting the cars from the salon to the apartment, it is better not to throw them away, but leave them in case of re-moving.

After that, it is important not to forget to wrap the equipment on the outside with cardboard or soft film, which will help prevent damage to the outer coating. You can fix the drain hose of the washing machine with a wire, a soft cord, tape. The interior of the drum can be filled with a soft cloth or foam.

How to take out

The store staff will deliver the purchased car to the car using special hydraulic Rokla trolleys. If transportation is needed for used machines, they will have to be taken out manually.

To avoid malfunctions in the further operation of the technique, you should pay attention to the following tips:

1. Before transporting the unit, wipe the inside dry and clean the chemical compartments.
2. There is no need to disconnect the drain hoses, just drain the water from them.
3. If the original factory packaging has been preserved, it is better to reuse it.
4. It is better to demolish even the smallest "washing machine" together.
5. When carrying it by hand, make sure that the angle of inclination does not exceed 30 degrees.
6. It is more convenient to carry if one person takes the unit from behind by the bottom, and the second from the front by the top.
7. It is forbidden to drag the technique with a "drag" and turn it upside down.

Transportation by car

It is important to remember that such fragile large-sized equipment as automatic washing machines is transported in an upright position. To do this, you will have to call a cargo taxi. If the transportation is carried out by a passenger car, it will hardly be possible to put the machine upright.

In such cases, it is carefully laid on its side, not forgetting to fix the washing machine motor. Owners of Zanussi cars should know that due to the features internal device this method of transportation is absolutely not suitable for them.

When choosing a truck, you need to make sure that the machine will not bounce on bumps and will not ride on the wooden floor of the body when entering sharp turns. This can be avoided by placing the unit in the corner of the body and forcing it with large objects (important when moving).

How to make sure everything works again

If the removal and transportation of the machine was carried out correctly, the drum and the drain hose were well secured, no problems should arise in its further operation. To make sure that there are no breakdowns, it is recommended to turn on the equipment immediately after it is delivered to the place of "permanent deployment".

They will say that something went wrong:

• obvious damage to the case;
• breakdown of the pump and drain hose;
• breakage of the container for powder that could fall out;
• failure of the electrical and mechanical control panel;
• breakage of power supply wires;
• faulty electronics, which got the remnants of water;
• breakage of shock absorbers.

Installing equipment on the floor

After no obvious damage to the case and malfunctions were found, the machine must be fixed to the floor. It is important to remember that a technique of this kind will not be able to work normally while standing on an uneven surface. Spinning and washing movements on bumpy wood or even tiled floors will disconnect the hoses and cause further leakage.

To keep the machine running quietly and securely, it can be fixed to the floor as follows:

1. The first thing to do is to choose a suitable location that gives you easy access to the electricity and water supply network.
2. After choosing a place, small holes are drilled in the wooden or tiled floor, into which the anchors are laid. They are needed for those models in which the maximum speed exceeds 1000.
3. If the anchors are not needed, then rubber substrates are placed on the floor or they are threaded through the erected anchors. After that, the "washing machine" itself is installed on them by adjusting its position with a level.

Fixing the washing machine to a tile is a little more difficult than fixing it to a wooden floor. This will not be possible without special skills in using construction tools.

Tired of washing by hand? So, you should buy an automatic car. But it is important to consider that one purchase is not enough to start using it right away. It is important to understand how to set up your washing machine correctly. AT modern society almost everyone has this easy-to-use machine. You simply cannot do without it. To save money when buying and not pay separately for the installation of the machine, you can try to install it yourself. Before buying, ask the sellers if the warranty for this device can be lost if you install it yourself? If this does not happen, you can calmly engage in the installation without fear.

Installation steps

To properly install the washing machine, you need to follow some rules and do everything in stages. Several specific stages are worth noting:

• Inspection of the purchased equipment;
• Removing all transportation parts;
• Choosing a place for installation;
• Installation of the machine according to the level;
• Connecting the device to the water supply;
• Sewer connection;
• Connecting the machine to the mains;
• Running for testing.

Inspection of purchased equipment

If, when purchasing this equipment, you ordered home delivery when it was brought to you, carefully examine the car that was brought to you. Do not write off your signature on the courier delivery form.

You need to proceed as follows:

1. Ask the courier to unpack the machine.
2. Look carefully for any dents or scratches on the outer cover.
3. Shake the car lightly in one direction and the other. A good reason to replace equipment if you hear any knocks and noises in it.
4. Even if you didn't like something, do not hesitate to talk about it right away, because you spent your money to purchase this equipment.
5. Remember, you can only subscribe to receipts if you are completely sure that there are no problems with the washing machine.
6. Since you will be using your purchase for several years, do not listen to the courier's persuasion, since it makes no difference for them which device to sell, broken or good.

Removing all parts

This step includes the removal of shipping parts. To ensure that nothing is damaged during transportation, special parts are installed. To understand which parts to remove and which not, it is worth mentioning that blocks, staples and bolts are used for transportation. Such dismantling is very important, because if it is not done, when this equipment is turned on, the machine can simply break down. It is best to read the instructions in advance.

Choosing a location for installation

It is now important to decide where to place your new purchase.

Sometimes the only installation option is the kitchen. This happens when the dimensions of the apartment are very small. If you press other devices, you can place the washing machine in the bathroom. Interestingly, a corridor is also considered an advantageous installation option, in some cases this is the only correct option.

To understand where the machine will stand, you need to measure everything, and also find out what dimensions your purchase has. It is best not to put this technique right next to a wall, as it vibrates during operation. The smallest distance between the wall and the machine is two or three centimeters. Regardless of where the device will be located, in the kitchen or in the bathroom, it is worth remembering that the surface underneath should be flat. Some people prefer to do this in the kitchen under the sink.

Leveling the machine

To make the car stand horizontally, you need to use the level. note that at the bottom of the washing machine there are special supports that are adjustable. In newer models, such supports are located only at the front.

To fix each leg at the required height, you should use a special locknut. It is very important to grip it well, because if this is not done, the legs will unwind over time and you will have to start all over again.

Connecting the device to water supply and sewerage

If in your apartment everything is provided for an automatic machine, then the work is completely facilitated. If this is not the case, you need to work hard and make all the sidebars yourself.

Perhaps the necessary tie-ins have already been prepared, then you just need to connect the machine to the water supply with a special hose. This hose comes complete with appliances. You will also need to insert a special corrugated hose for the water supply into the tee of the sewer system.

To do everything yourself, you need to purchase the following parts:

• Tee;
• Adapter from 1/2 "thread to 3/4" thread;
• Valve;
• PTFE sealed tape.

All of the above parts must be put together. When the assembly is assembled, you need to cut the water pipe and insert a tee. After that, a hose from the machine must be attached to the valve through the adapter.

If you think that the valve is not needed, then remember that it will allow you to disconnect the machine from the water supply at the right time. Thanks to the valve, this can be done without shutting off the water supply.

To make a branch, look at what your pipes are made of. If they are iron, then you need to use a welding machine for them, if they are plastic, then you need a soldering iron. If you do not have such tools, then you need to buy a branch sleeve. The price and diameter for pipes may vary. You need to buy 15 millimeters or maybe a little more.

Now you need to think about how to install a washing machine drain? To connect the machine to the sewer, you need to take the following materials and tools:

• Elbow - diameter 5 cm, length 40 cm;
• Tee 5 cm;
• Coupling;
• Rubber cuff;
• Fastening clamp;
• Air valve 5 cm.

It is important to ensure that there is easy access to the drain hose at the drain point. Then, using a hacksaw for metal, you need to make an entrance for a 12 cm pipe in that place.In the hole made, you need to insert a five-centimeter tee and a coupling. The plastic pipes must be installed so that they can move freely from side to side in order to install the tee and the coupling.

If you are placing a clipper under your kitchen countertop, pay attention to the sewer riser. In the bathroom, the riser is 10 cm, but in the kitchen it is half as much - 5 cm. Also take into account which floor you live on and how old your house is.

The question may arise, how to install a built-in washing machine? Usually, you need to make a built-in car when the apartment itself is small and the kitchen is too. It is important to remember that some clearance is required from the countertop so that it does not touch the chipboard during washing. The connection of such machines is also done according to the aforementioned scheme, but it is already a little more complicated, since it is taken into account that there are tables around the machine.

Video on how to install a washing machine

Electrical connection of the machine

For the machine to work, you need to guarantee it:

• Water;
• Sewerage;
• Electricity.

In accordance with these three points, you need to determine where it is best to install the device in the apartment. If you do decide to put a typewriter in the bathroom, you need to remember that there are two ways to connect to electricity:

1. Connect using an extension cord;
2. Place a socket nearby.

The socket is different from the usual one. It must have a grounding contact. Electrical safety must be taken seriously, as the bathtub is a source of dampness.

You may not have a suitable plug for your outlet, then you will have to buy an adapter for the outlet.

Running for testing

Remembering how much the device you bought costs, you need to be very careful when doing a test download. This test does not include laundry. You just need to fill in the washing powder and turn on the washing mode, thanks to this you can not only check how the machine works, but also clean it of dust and factory debris. Pay attention to how the water is poured, how quickly and how it heats up. If the spinning and draining are performed correctly, then everything is in order.

Some users even install a washing machine in the toilet if there is no room elsewhere. The place where the device can be installed can be above the toilet bowl. This place is also quite profitable, since there is not only good drainage and water supply, but also some have sockets for connecting to electricity.

When doing all the work, be especially careful. Pay attention to how to install the washing machine evenly, how to safely connect it to electricity and water supply, and also choose the most optimal and convenient place for you. Then washing your clothes will not only bring you pleasure, it will also save you time.

It often happens that a high-quality appliance is purchased, seems to be installed correctly, and then it turns out that the washing machine jumps during the spin cycle. You can, of course, leave it that way, but constant noise is inconvenient, and it will also reduce the service life.

If your washing machine vibrates a lot, it could be due to a technical problem or installation in the wrong place.

Why does the washing machine jump during spinning and what can be done about it?

First of all, check if everything was done according to the instructions during installation. Often the machine jumps simply because the shipping anchors have not been removed before use. They can be called shipping bolts, but this is not entirely correct - in addition to the bolts, there are other details, but this is not essential. They are installed in the machine for rigid fixing of the tank, which, as the name implies, protect the machine from damage during transportation. Sometimes, during installation, they forget to remove them or simply do not understand why they need to be removed, and this leads to strong vibration during spinning. When the anchors are removed, the tank hangs freely on the shock absorbers, which dampen vibration. If you have no idea how to do this, it is best to call the wizard. Readers who are confident enough in their abilities can simply use the instructions - there it is described in detail and with illustrations how to remove the anchor when installing the washing machine.

Another reason for a jumping car might be that the legs are not adjusted. This can be dangerous: if it is not completely level, some parts may touch each other and deteriorate. Check the machine for wobbly by shaking it from side to side - the fact that it will give in clearly indicates that the legs are not adjusted correctly. It's not at all difficult to fix it yourself. Most often, the legs of the car just twist like bolts, so anyone can do it right. The best option for adjusting is to put a building level on the machine (if it is not there, you can use a saucer with water, but it will not give such accuracy). You must first put the building level parallel to the front (the door is located on it) and the rear wall of the machine, check the slope in this plane and adjust. After that, put it parallel to the side walls, that is, perpendicular to the previous position, and do the same.

If the previous tips did not work, the reason may not be the machine, but the wrong floor for it (too smooth, crooked, or not strong enough). To fix this, you can buy a thick rubber mat, special rubber pads, or suction cups. The pads will need to be glued: check with the sellers how to do this with the ones you purchased. All this you can surely find in any home goods store. In addition, the machine could move corny. Check if it is in contact with walls, pipes, or other objects around it.

Still not sure why the washing machine is jumping? Some machines start to shake and make noise when they cannot cope with the correct balancing of the laundry. It is worth looking at the instructions for how much laundry is recommended to load. It is also advised to add a couple of towels if you are washing one bulky item (for example, a jacket) so that the laundry is evenly distributed. Try to distribute the laundry evenly throughout the drum when loading and not wash too little or too much.

If the machine has worked properly before

The machine worked fine for a while, but now it jumps? This may indicate malfunctions, and it is better to deal with breakdowns as early as possible, before they lead to more serious damage. Most often these are problems with the counterweight, shock absorbers or bearings.

• Shock absorbers.

Shock absorbers in washing machines are designed to soften vibrations and prevent the tank from hitting the body, which keeps all the parts intact.

To check the shock, pull the tank towards you and release. To do this, you need to stick your hand inside the drum, as if catching on to it and pulling. If he just returns to his place, everything is in order. If it sways from side to side, the shock absorbers will have to be changed.

To repair the shock absorbers, you need to change the plastic covers. Disconnect the shock absorber from the body (for this you need to unscrew a few screws and remove it). If you find damaged covers, remove them and replace with new ones. To do this, you need to unclench the U-shaped metal rods, install new parts and return the rods to their original position.

• Counterweights.

The counterweight is a heavy block that also prevents vibration, making the washing machine stable. It is made from concrete or plastic. Concrete counterweights crumble and collapse over time. But more often there are problems with fastening - they get loose, there is a characteristic knock and vibration. If you do not know how to replace them correctly, calling the wizard is a good solution.

• Bearings.

Unfortunately, due to moisture, some breakdowns in washing machines are almost inevitable. Bearings, for example, are likely to begin to rust and deteriorate over time and become unusable as a result. At first, the machine emits an iron grinding, and when the damage becomes more serious, the drum begins to move freely from side to side, and the machine vibrates strongly. If you suspect a bearing breakage, it is highly discouraged to use the machine - during operation, they can literally fly apart, which will damage the rest of the parts. It is better not to change the bearing on your own - such work requires experience and special knowledge.

If you are not confident in your abilities and knowledge, we strongly recommend that you seek help from a specialist.

There are many cases when, not knowing what, how and why to do, unlucky craftsmen simply broke the technique. Some parts of washing machines are quite expensive, and even more so a new machine. So it may happen that in pursuit of savings, you will have to spend money on more complex repairs and purchase of new parts as a result.