The home button does not work on 5s. Why the home button on iPhone doesn't work. New on the forum

Many users begin to notice over time that the herd's Home key is slower to respond to touches, and sometimes even requires double tap. Over time, it may stop functioning completely. But few people know that the reasons may not be in the key itself, but in software failures.

If it doesn't work Home button For this reason, it is enough to perform a few steps:

• Just restart your phone. The operating system must be freed from temporary files, support for all applications that are running and not turned off in time, etc. Sometimes this action is enough to restore the functionality of the Home key.
• If the Home button is stuck, you can try to calibrate it. To do this, launch some Apple app, for example, the weather forecast, after which you need to press the power key and hold it. When a red sign is visible on the screen prompting you to turn off the phone, simultaneously press and hold the Home key. The problem will be fixed if the problem was only a software glitch.

Why else doesn't the Home button work?

Much more often, the Home button on the iPhone does not work for more serious reasons. One of them is moisture getting inside the phone. It is enough to use the device 1-2 times in the rain or drop it in water for a few seconds, and the “Home” key begins to function worse and becomes stuck. The cause of the malfunction is oxidation of the contacts due to the onset of the corrosion process. The best way- replace it at the service center. If for some reason you cannot do this, and the Home button on your iPhone does not work, you can use one of the repair methods.

Buy WD-40. This is an aerosol that is well known to motorists. You can use it to try to clear the key. The product needs to be sprayed onto the element, and then pressed on it several times through a napkin. The aerosol should remove traces of corrosion, as a result, performance will be restored for some time. However, such half-measures do not provide any guarantees, so the result of such actions may be insufficient. In addition, sometimes WD-40 flows under the glass, and in the end you have to change it too.

It happens that the Home button stops working due to a fall or a strong blow. In this case, it will not be possible to do without serious repairs, since the cables are most likely damaged. In this case, they will have to be completely replaced, and this requires the attention of specialists. Any do-it-yourself repair will not solve the problem, and in the end you will still need to contact professionals, but their services will cost more after incompetent treatment.

What to do if the Home button stops working?

If the Home button does not work well, the most reliable solution is to contact. Specialists will first carry out a full diagnosis to find out the causes of the breakdown, and then fix it in the shortest possible time.

If you know exactly why the Home button does not work, indicate the reason when submitting a request, then the technician will be able to complete the repair faster. All services provided by our specialists are guaranteed, so you can be sure that everything will be done to the highest standards. high level quality. We undertake to correct any malfunctions, and whatever the reason that led to the breakdown, our specialists will quickly restore the device.

As you use your mobile device, the functionality of the main button may change; it may become less responsive, react late, or not work at all. The problem is typical for iPhone devices and iPad, this kind of problem most often occurs as a result of a software glitch, and in this case it will not be difficult to fix it. You can do this yourself or seek qualified help, which can be provided by the specialists of our service center. In some cases, heavy use of the Home button will cause it to wear out, and in this case more serious intervention will be required to restore its functionality.

Causes of malfunction

The Home button is made of glass, making it vulnerable to mechanical stress. Careless handling of the phone, impacts and falls on a hard surface, and exposure to sharp metal objects become the main causes of mechanical damage to the button. However, in service center Most often we get mobile phones in which the Home button does not work (sticks, clicks, jams, does not work well) due to a software glitch.

There are various ways restoring the functionality of the Home button, which you can use independently or with the help of service specialists. These include:

Performing calibration programmatically. This method is only suitable if the Home button does not work due to a software glitch. To perform the calibration procedure, you must open any standard application devices (weather or stocks), press and hold the power button until the power off bar appears. Then the Home button is held until the shutdown bar disappears, after which running application unloaded from memory. After these manipulations, the Home button should still work.

Adjustment of the position of the dock connector can be applied if the button stops responding to pressing. To perform the procedure, you will need a 30-pin cord, the plug of which fits into the connector mobile phone, and then gently presses the finger from bottom to top. After this, the Home button is pressed and the cord is removed.

Using WD-40 aerosol (“Vedeshka”). The aerosol is widely used in the aviation, automotive, weapons and aerospace industries, and at home to eliminate squeaking doors, lubricate metal parts, locks, etc. The aerosol is applied to the Home button and 5-10 clicks are performed, after which its functionality returns.

Performing the software duplication procedure. To do this, you need to go to the phone settings menu (Settings -> General -> Universal access) and turn on Assistive Touch, then press the circle that appears on the screen and click the “Home” button. After closing the settings, the button can be called at any time to return to home screen. However, this method is only a temporary solution to the problem, which can help before going to a mobile device repair shop. #the home button on the phone doesn't work #why #what to do

Not everyone can perform restorative procedures, so you can’t do it without the help of a competent specialist. If the Home button on your phone does not work, feel free to go to our workshop that repairs phones in Minsk. Our technicians will quickly determine the cause of the problem, promptly and efficiently restore the functionality of the mobile device, providing a guarantee for all work and services performed.

From time to time, the main button of mobile devices on iOS becomes less responsive - it starts to work with some delay or stops working at all. In most cases this is due to software glitch and restoring its functionality is not difficult. It happens that after several years of active use, the Home button mechanism wears out and more serious intervention is needed.

Be that as it may, you can revive iOS devices without contacting specialists at a service center. There are four ways to fix the broken Home button problem on iPhone and iPad.

Method 1: Software calibration

Sometimes the main button iPhone smartphone and the iPad becomes less responsive - it starts to work with some delay. If this is due to a software failure, then it is necessary to perform.

To do this, you need to open any standard application, such as weather or stocks. Then, press and hold the power button of your iOS device until the power bar appears. Now you need to hold Home until the bar disappears and the running application is unloaded from memory. After this, the Home button will work as expected.

Method 2: Adjust the position of the dock connector

In situations where the Home button on the iPhone and iPad stops responding to presses, it will help, for which you will need a standard 30-pin cord. First, you need to place the plug into the iPhone connector, and then put your finger under the plug and gently press it from the bottom up. After this, all you have to do is click on Home. Now you can remove the cord and check the operation of the device.

Method 3: Use WD-40 spray.

You can restore the functioning of the worn-out Home button mechanism on the iPhone and iPad using the well-known among (or simply “Vedeshka”). This product is used in the weapons and aerospace industries, aviation, and electromechanical production.

The spray is also used at home, the “Vedashka” eliminates the creaking of doors, it can be used to lubricate bicycle parts, locks, etc. WD-40 will also work in the case of an iPhone - just spray the product on the non-working Home button, and then make 5-10 quick clicks. As a rule, it comes to life and begins to respond to pressure again.

Method 4: Software duplication

If the three previous methods did not work, apparently, the button is really broken and specialist intervention is required here. Until you go to a workshop for repairs, you can use the built-in operating room iOS system function of software duplication of functions.

To do this, go to the Settings menu -> General -> Universal Access and turn it on by clicking the switch at the top of the screen. Now click the circle that appears on the screen and in the window that appears, click “Home”. Once you close settings, you can call this button at any time to return to the main screen.

In this case, this is a temporary solution that will allow you to use your iPhone and iPad even with a broken Home button.

From time to time, the main button of mobile devices on iOS becomes less responsive - it starts to work with some delay or stops working at all. In most cases, this is due to a software failure and restoring its functionality is not difficult. It happens that after several years of active use, the Home button mechanism wears out and more serious intervention is needed.

Be that as it may, you can revive iOS devices without contacting specialists at a service center. There are four ways to fix the broken Home button problem on iPhone and iPad.

Method 1: Software calibration

Sometimes the main button of the iPhone and iPad smartphone becomes less responsive and starts to work with some delay. If this is due to a software failure, then it is necessary to perform a calibration procedure.

To do this, you need to open any standard application, such as weather or stocks. Then, press and hold the power button of your iOS device until the power bar appears. Now you need to hold Home until the bar disappears and the running application is unloaded from memory. After this, the Home button will work as expected.

Method 2: Adjust the position of the dock connector

In situations where the Home button on the iPhone and iPad stops responding to presses, a small trick will help, for which you will need a standard 30-pin cord. First, you need to place the plug into the iPhone socket, and then put your finger under the plug and gently press it from the bottom up. After this, all you have to do is click on Home. Now you can remove the cord and check the operation of the device.

Method 3: Use WD-40 spray.

You can restore the functioning of the worn-out Home button mechanism in the iPhone and iPad using the WD-40 aerosol known among car enthusiasts (or simply “Vedashka”). This product is used in the weapons and aerospace industries, aviation, and electromechanical production.

The spray is also used at home, the “Vedashka” eliminates the creaking of doors, it can be used to lubricate bicycle parts, locks, etc. WD-40 will also work in the case of an iPhone - just spray the product on the non-working Home button, and then make 5-10 quick clicks. As a rule, it comes to life and begins to respond to pressure again.

Method 4: Software duplication

If the three previous methods did not work, apparently, the button is really broken and specialist intervention is required here. Until you contact a workshop for repairs, you can take advantage of the software duplication function built into the iOS operating system.

To do this, go to Settings -> General -> Universal Access and turn on Assistive Touch by clicking the switch at the top of the screen. Now click the circle that appears on the screen and in the window that appears, click “Home”. Once you close settings, you can call this button at any time to return to the main screen.

In this case, this is a temporary solution that will allow you to use your iPhone and iPad even with a broken Home button.

Modern smartphones are made with a minimum of buttons. Touch controls are becoming more and more preferred. Today you will be presented with the Home button on the iPhone. What is this control? What functions is it responsible for? Where is the button located? What to do if it stops working? The answer to all these questions is much simpler than it might seem at first glance. Even an inexperienced iPhone owner can figure them out.

What is the button

It is important to be aware of which control mobile device we're talking about. The Home button on an iPhone is one of the few keys that can interest the user. She is the most functional element device control.

It is noted that the Home button is used on a smartphone more often than others. It supports a variety of features. They will be discussed further below. This control is mainly used to unlock the iPhone or exit a game/program.

Location and description

Where is the Home button on an iPhone? Every device owner should know about this. It is not difficult to guess which smartphone control element we are talking about. The button being studied is located at the bottom of the gadget, on the front panel, under the screen. It is made of glass and has a round shape. The button itself usually displays a small square, but it may not exist. It all depends on iPhone models. The control element is present in any Apple product.

Functional

What can the Home button on an iPhone be used for? It has a wide range of applications. There are several options for pressing the button - one, two and three. Depending on this, the command executed on the smartphone will change.

For example, on an iPhone, using this button you can:

• unlock the device;
• close a program, application or game;
• go to Recovery Mode;
• launch smartphone or tablet widgets;
• activate one of the standard programs;
• open a menu showing applications that support multitasking (in latest versions iOS);
• enable and use voice control(triple press).

The first 4 points are the same for all iPhone models. The rest of the functionality depends on the installed operating system. Often, users themselves can set in the gadget settings what the “Home” button on the iPhone will be responsible for. Therefore, it is difficult to say exactly why it is used. Just remember that it is used to exit programs, unlock the device and switch to Recovery Mode.

If it doesn't work

As already mentioned, the mentioned control element is used constantly in practice. Therefore, sometimes owners of Apple products complain that the Home button refuses to perform its functions. Fortunately, Apple company made sure that all controls for smartphones and tablets were robust enough. In most cases, the breakdown is fixed quickly and without much difficulty.

So, if you want to make the “Home” button on your iPhone working after some kind of failure, you need to:

• Clean the control element and lubricate it. It is best to use special lubricants and alcohol for this purpose.
• Calibrate the button. To do this, open any system application(say, a calendar), after which you need to hold the power button of the smartphone until function menu. Next, press the Home button. Hold it until the menu disappears.
• Correct the position of the connector. The gadget is connected to a 30-pin cord, after which you will need to lightly press where the wire connects to the iPhone.

All these tips will help bring the Home button back to life if there was a problem system failure. If the hardware is damaged, the control will have to be replaced. It is advisable to seek the help of specialists. They will easily replace the button and return it to functionality.

Output to screen

But there is one more trick. It will help you use the control you are learning without its physical form. The "Home" button on the iPhone screen is not uncommon. Every modern owner of an Apple product can display it and use it if necessary. Usually this function applies to new iOS. To display a button on the screen, there is special function. It's called AssistiveTouch. You can turn it on in a few clicks.

More precisely, to display the Home button on the device display you will have to:

• Open "Settings" - "General" - "Universal Access".
• Find AssistiveTouch. Click on this line.
• Move the function indicator to the "On" position.

This is the simplest and quick solution to bring the idea to life. The screen will appear graphic image Home button, which can be used along with the physical interpretation of the element. Nothing difficult, unclear or unusual. If the Home key is displayed on the screen, it can be dragged to any place convenient for the owner.