Connector for dvb cam module. Equipment for digital television is what you can buy in our store. Is it possible to buy an MTS module separately, without an antenna?

Conditional access module Tricolor CI+ Ultra HD (Center) is a compact device designed for broadcasting satellite channels without using wires. The smart card is installed in a special slot on the TV, after which the setup is carried out automatically. The model supports more than 200 channels with Ultra HD resolution and allows you to listen to up to 30 radio stations. Switching programs is carried out using a regular remote control remote control. The Russified menu makes it easier to find the necessary content. The module supports DVB-S and DVB-S2 broadcasting standards. The model provides access to the Tricolor package for a period of one month; a satellite dish is required for viewing.

Conditional access module CI+ for receiving "Tricolor TV" with Ultra HD support (project "Tricolor TV. Center")

1.Description

CI+ module is a compact equipment that, if the TV has a CI slot, supports the CI+ standard and can receive satellite television will allow you to view Tricolor TV channels. The CI+ module is inserted into the TV, which will save you from unnecessary wires.

To change channels, use the TV remote control.

Together with the CI+ module, you must purchase and connect a satellite dish if it is not already installed.

2.Subscriptions included

The package already includes access to the “Unified Ultra HD” channel package for 1 month, which provides viewing of more than 200 TV channels, including in high (Full HD) and ultra-high definition (Ultra HD) formats, and listening to more than 30 radio stations.

3.Connection and setup

Before purchasing and connecting equipment, read the instructions. Make sure your TV supports the standard satellite broadcasting DVB-S2 3 and equipped with a CI+ v 1.3 or later slot 4. To watch Ultra HD channels, you need a TV that supports the Ultra HD format and HEVC 5 image encoding version 5.0 or later. Install and configure the satellite dish, place the smart card in the module slot and insert the module into the special CI+ slot on the TV. Connect the LNB IN output of the TV to the satellite antenna converter using a coaxial cable and select the appropriate signal source in the TV menu.

Scope of delivery

1 Full HD - resolution 1920x1080 pixels. Used in high definition television (HDTV) broadcasts.

2 Ultra HD - resolution 3840x2160 pixels. Ultra high definition television, 4K resolution (Ultra) High Definition Television, UHDTV).

3 DVB-S2 - satellite broadcasting standard, digital television, including ultra-high definition resolution.

4 CI+ slot included in the TV, allowing you to view encrypted channels using CAM modules and decoding cards.

5 HEVC - H.265 video coding standard (English: High Efficiency Video Coding).

Modern TV provides its users great opportunities, including watching TV channels in high resolution with excellent sound, but this requires additional equipment as a module for the TV and the subscriber’s personal smart card. It is also worth considering that not all models provide a CI slot, so to be able to connect digital television with a large selection of TV channels, you need to purchase and install a TV receiver into which a smart card with a module will be installed.

Many TV models from leading manufacturers such as Samsung, LG, Sony have long had a number of built-in designs that provide television screens with advanced functions. Developers try to equip their TVs with convenient devices, thereby freeing the user from the need to connect additional equipment that takes up space. For example, built-in tuner or in other words, a digital receiver allows you to receive streaming video and decorate the signal different formats broadcasting. However, in order for him to cope with his tasks, he definitely needs external support signal - it is provided by the CAM module.

This device resembles a small computer that first conducts digital stream decoding, and then sends a signal to match it with specific model TV. This electronic device, equipped with a special card, is designed to reproduce digital signals and pay channels with high definition. And, if the TV model has a built-in DVB-C tuner, the device in question will save users from additional wires, installation of a separate TV set-top box and a second remote control.

How does it work

To technical device could independently read the information it receives (meaning, for example, paid media content), the client of the service provider needs to purchase a Smart card. This is a plastic card with a microchip that identifies the subscriber and provides him with access to digital TV and paid channels. It is inserted into the CAM module. Afterwards the adapter with the card inside is installed in the TV. The user can only configure the list of received TV channels.

Configured equipment makes it possible to receive media content with various expansion and quality options, and the image will be automatically adjusted to certain parameters. The latest models of the electronic devices in question can independently record streaming video and play it back at the time required by the subscriber.

What types of CAM modules are there?

According to technical specifications, the entire range of manufactured conditional access devices to encrypted channels are divided into types. The simplest modules are T2 and single-channel with support for only one coding system. Multi-channel and universal models are also offered.

1. Single channel module able to decode paid channels, broadcast only by the selected provider (satellite). If you change service provider or satellite with a different broadcasting system, the module becomes inoperable.
2. Multichannel models devices allow you to switch from one encoding system to another using SIM cards from different providers. The device automatically recognizes the inserted SIM card, rebuilds itself and updates the software.
3. Universal module Manufacturers are firmware to work with several signal coding systems. The device can automatically adjust signal parameters, configure programs, and work with SIM cards from any provider. Suitable for working with paid software packages.

If we talk about module cost, then in specialized stores you can see a fairly wide range of prices. As a rule, the cost of the first option ranges from 1,500 to 3,000 rubles. Price more modern models varies around 5000-6000 rubles. Experts recommend not to opt for too cheap options. Otherwise, this will lead to a quick replacement because they will not cope with the latest technologies, and the purchase will be much more expensive than planned.

The advantages of such equipment

Before purchasing a new LG, Philips or Sony TV, you should think about purchasing a model with a built-in receiver and a slot for a CAM module, since such electronic equipment has undeniable advantages.

1. Better price. Purchasing a conditional access module will cost less than a regular TV set-top box or Smart set-top box.
2. Easy to install and configure. Simply insert it into the slot along with the subscriber card and swipe easy setup equipment.
3. Doesn't take up space. This device is a little larger size plastic card, which is inserted into the CI slot on the TV panel. It does not require hanging additional shelves, especially if the TV panel is mounted on the wall, as for an external TV set-top box. In addition, such wireless equipment does not take up an extra outlet, since it is powered by the TV.
4. Simple controls from the TV remote control.

How to install a CAM module in a TV

Connection and configuration do not require special knowledge. The main thing is, even before purchasing a module, make sure that it is suitable for the TV suitable device– on the panel there is C.I.-slot The installation algorithm is identical for any TV, be it Lg or Samsung.

1. First, you need to correctly install the smart card into the adapter. That is, insert the card electronic chip up, while holding the module facing you (the provider’s logo is placed on it).
2. The adapter equipped with the card is inserted into the PCMCIA slot of the turned off TV, with the front side facing out.
3. Now you can turn on the TV. A corresponding message about connecting new equipment should appear on the screen.
4. Often you don’t have to configure anything, just run automatic search programs.

If nothing happens after turning on the TV, the equipment is most likely not installed correctly. You should turn off the TV and do all the installation steps again. Health Status can be checked in the TV menu, depending on the manufacturer, the name of the corresponding item in the interface may be called “CA Module”, “CA Interface”, “CAM”, “CI Interface”, “ Common Interface».

If the equipment is connected, the TV sees it, but the channels cannot be tuned in, you should contact your service provider.

Precautions for use

When operating the CAM module, the user is required to comply with the following recommendations:

• avoid serious mechanical influences: falls, squeezing;
• when installing the module into the television receiver, strictly follow the manufacturer’s instructions;
• ensure that the module does not overheat;
• The SIM card should not be stored near sources of electromagnetic radiation;
• if it is necessary to remove the SIM card from the module, strictly follow the instructions;
• To avoid connector failure, do not unnecessarily remove the module from the TV.

Protecting providers from software hacking

Paid content is offered by a large number of providers. Each service provider protects its channel packages with one or another encoding system. To make it more difficult for attackers to crack software codes, providers systematically change the control key in the code combination. Receivers of subscribers who have paid for the service receive a code combination via satellite to decrypt encrypted channels.

The CAM module is intended for owners of LCD or plasma TV models that are equipped with a built-in receiver and support HD Ready or Full HD digital formats. Such an electronic device, equipped with a smart card, provides the ability to watch pay TV channels. Easy installation does not take much time and does not require special knowledge. The main thing is to make sure before purchasing that the TV has a built-in DVB-C tuner and a CI slot for such an adapter.

A CAM module is a device that decodes a television channel with a certain encoding. Simply put, a CAM module is a slot into which a channel access card is inserted, and a recognition device for this card. The CAM module itself is inserted into the CI slot of the receiver or TV, thereby ensuring the operation of the TV or other receiving equipment with a channel access card.

Since television operators use different encodings to encode channels, different modules are needed for each encoding. For example, the Russian provider NTV+ is encoded in Viaccess, and the Ukrainian XtraTV in Conax. Accordingly, to use an NTV+ access card you need a Viaccess CAM, and to use an XtraTV card you need a Conax CAM. Cable and broadcast operators also often use channel coding. The Ukrainian cable operator Volya Kabel encodes its channels in Conax, and the terrestrial digital DVB-T2 operator Zeonbud encodes its broadcasts in Irdetto Cloaced. To access operator data channels, you also need the CAM modules: Conax for Volya and Irdetto Cloaced for Zeonbud. By the way, Irdetto Cloaced CAM, due to its narrow focus, is called a CAM module for DVB-T2.

It is worth remembering that the module itself is a decoder. If you don’t need a specific key to watch an encrypted TV channel, then by inserting just the module, you can already view the channels as if they were in open access. This scheme works in particular in Ukrainian DVB-T2 broadcasting. To watch TV channels, just buy and insert a CAM module. There is no pay per view.

Also a very important detail is technical aspect compatibility of the CAM module with a specific TV model. Here, special attention is given to the type of slot into which the CAM is inserted. The fact is that there are two types of connectors into which modules are inserted. These are the so-called CI slot and CI+ slot. Externally, the slots are identical. However, they are different. To understand what type of slot is installed in your TV, you need to view its instructions or contact service center servicing your TV. You need to look at specific maps technical specifications Manufacturer-specific CAM. Generally speaking, all CAMs, for example CAM modules for Will, work with a CI slot. The exception is the DVB-T2 module CAM from Ukrainian operator"Zeonbud". This module requires the presence of a CI+ module for installation.

By the way, CI and CI+ slots differ only in software. That is, if your device has CI, and you need CI+, for example, to watch Ukrainian DVB-T2, then you can hope that the manufacturer of your receiving device will reprogram it via the Internet or post new version software for your device in order to convert the CI slot to CI+.

Article provided by the site roks.com.ua/ru/

MYSELF-module – a device that provides user access to paid digital content. The module is needed so that you can watch unique programs from pay TV channels, selections of exclusive news releases and specific films ordered by the provider. The system decoding TV signals is contained and reads using a CAM adapter.

What is CAM - module

CAM module – adapter for access cards to pay television channels. Abbreviation CAM Means conditional-access module. MYSELF-the module catches streaming video, decrypts the content and sends the signal to the TV.

The card is received by a digital TV subscriber after signing up for a paid subscription to the channel. You can order a card from your television operator. Each card has a special number associated with it. You can receive temporary channel access keys to this number. These keys are needed to CAM-the module decrypted the TV signal and transmitted it to the TV. Keys remain relevant only for a limited period of time. The frequency with which access keys are updated is determined by the encryption algorithm.

The card is installed in the slot on CAM-module To CAM-the module worked, it must be placed in C.I.-slot on the TV or receiver. What's happened C.I.?

C.I.-module is a kind of intermediary between the TV and CAM-adapter, specialized. C.I. can be designed for 1 or 2 access cards. Modern version of the interface – CI+, technologically makes piracy more difficult and sets many restrictions for the content user. Some content owners make it impossible to skip ads or prevent you from downloading videos.

C.I.-module is Common Interface on the TV, it is equipped with a slot for smart cards. Since this is an interface, it is used to connect the television device to the plastic card adapter.

What your TV must have so that you can install a CAM module in it:

• C.I.-slot;
• Built-in DVB-C tuner;
• Support HD Ready and Full HD formats.

The common interface on the TV is installed to protect the interests of pay TV content providers.

Operating principle

The client purchases a plastic card with a tiny chip from the operator. The so-called “Smart card” plays the role of an identification document. Each card is assigned its own number and the operator undertakes to notify the client about changes in encryption keys. Access to paid subscriptions It opens via a smart card.

The smart card is placed in MYSELF-module. MYSELF-the module is sent to C.I.-slot on the TV. Next, the card owner configures the list of channels he needs and enjoys the subscription. The setting also allows the device to play videos of different quality or extension. With the help of special modern technologies, the image will be processed and enhanced to meet some standards.

Now MYSELF-modules can be programmed to schedule a recording of a program in order to play it back later.

IMPORTANT! Slot for CAM-adapter for TVs Samsung And LG shortened CAM the module will not fit into LG more than half. If the device cannot be easily pushed deeper into the slot, you should not even try - there is a risk of damaging the module or its connector.

What are there MYSELF– modules

CAM adapters are:

• Universal;
• Single-system;
• With the possibility of additional programming of functionality.

Single-system

Single-system MYSELF-the module is designed for only one specific signal encoding system. Many operators provide MYSELF-module along with a pre-installed map, after subscribing. This system is used by Tricolor, MTS, DomRu companies. In case of concluding an agreement with NTV-plus, the user will be required to install the received card into an empty module.

CAM-the adapter can be provided by the operator free of charge or purchased separately by the client. Rostelecom, for example, sold an adapter along with a card for a thousand rubles. If you change service provider, you may need to get another CAM-module.

Universal

The universal adapter decrypts encodings for several modular systems at the same time. Such an adapter itself can change the signal and program settings, adapting to the card installed in its slot.

The price range for universal KAM modules ranges from approximately 1,500 to 6,000 rubles. Adapters from 1500 to 3000 rubles are inexpensive, but are already somewhat outdated. Adapters in the range of 5-6 thousand are adapted to modern broadcasting standards and the latest technological advances, so they will be usable longer.

Benefits of use

Why buy a TV with a CAM adapter input:

• CAM-module cheaper than a set-top box;
• Ease of operation and configuration;
• Compactness;
• Teams on CAM-the module can be sent via a regular remote control;
• Consumes electricity directly through the TV;
• If available on TV CI-cam, there are no hassles with a cable and an external decoder;
• Built-in digital tuners are equipped by default with a decoder for HDTV-systems.

Important! To the benefits of use CAM One can also attribute an improvement in the image due to the absence of an extra step in the video processing process. U CAM-adapter, unlike an external decoder, there is no need to translate digital signal to analog.

How to install a CAM module in a TV

So, you purchased a TV device with a CI slot. How to start using it:

• Face the card with the operator’s logo facing you;
• Place the card into the adapter. The card chip should face up when installed in the slot;
• Then the adapter with the card is placed in PCMCIA slot on the TV. In this case, the television receiver should be turned off, and the adapter should be turned facing outward;
• Only then turn on the device. On its screen you will see a warning that a new device has been connected;
• To make sure correct operation CAM-module, go to the automatic search for programs. You will see the connection status in the device menu.

IMPORTANT! only possible after installing the module in PCMCIA slot

To use the cam module you need:

• connection to a digital television network
• Availability on TV:
  — built-in digital tuner that receives a signal in DVB-C format;
  — built-in MPEG-2/MPEG-4 decoder;
  — CI (Common Interface) slot for installing a CAM module.

As a rule, all TVs younger than 2013 allow you to install a cam module (for Samsung TVs - starting from 2009, Philips - from 2011). Setting up the cam module to receive signals from any digital television operators is identical, since you are not setting up the cam module, but the TV itself. Below are the cam module settings for the main brands of TVs.

Installing the CAM module

1. Disconnect the TV from the power supply.
2. Carefully insert the CAM module without the access card. Make sure the module is completely seated in the slot.
3. Insert the access card into the CAM module with the logo from the TV. The side of the card with the chip should be facing the CAM module. The edges are correct installed card access must not extend beyond the CAM module. For MTS television, the card must be activated.
4. Connect your TV to the network.
   After turning on, information about the presence of a CAM module will appear on the TV screen.

Setting up the CAM module

• Setting up a cam module on a SAMSUNG TV
  Enter the menu (green button) - “Channel” (icon “Satellite dish”) - “Auto-tuning” - signal source - “Cable” - “Digital” - “Start”
• Setting up a cam module on a PHILIPS TV
  On the back of the TV you need to find a sticker where for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to Philips, digital television is available (at the time the TV was released). If Russia is not there, then another one will need to be installed.
  “Home” icon - “Configuration” - “Installation” - “Reinstall channels” - “the country indicated on the sticker on the back panel” - “Digital mode” - “Cable” - “Automatic” - “Start”
  Models Philips TVs 2011:
  “Home” - “Installation” - “Search for channels” - “Reinstall channels” - “the country indicated on the sticker on the rear panel” (usually France, Finland or Germany) - digital mode “Cable (DVB-C)” - in the “Network frequency” line, enter the frequency; in the “Transmission speed” line, enter the speed; select the “Frequency scanning” line.
• Setting up a cam module on a SHARP TV
  If the “DTV MENU” item is not on your TV, then you need to select another country - France, Switzerland, Sweden or Finland.
  Button - “DTV” - “DTV MENU” - “Installation” - “Auto installation” - “OK”
• Setting up a cam module on a SONY TV
  Not all SONY TVs are equipped with a tuner for digital television (DVB-C), so first check whether your TV receives a signal: models with a DVB-C tuner are marked KDL-**EX*** or KDL-**NX***. In models KLV-**BX***, etc. There are no DVB tuners.
  “MENU” (or “HOME”) button on the remote control (green) - “Settings” - “Digital configuration” - “Auto search for digital stations” - connection type “cable” - scan type “full scan” or “manual” - enter frequency — Access code “Auto” — enter the symbol rate — “start” — wait until the channel search ends.
• Setting up a cam module on a Panasonic TV
  “Menu” - “Settings” - “Menu analogue. settings" - "Add TV signal" - check the box "DVB-C" - "Start auto-tuning"
  After completing the search for channels in the main menu, in the “Settings” item, the line “DVB-C setup menu” will appear, where you can adjust the setting in manual mode(set frequency and speed). If your TV asks for a search step, enter 8 MHz.
• Setting up a cam module on a Toshiba TV
  Language "Russian" - DTV tab manual setting— OK — enter frequency, modulation, symbol rate — OK — channel search will begin
• Setting up a cam module on an LG TV
  “Menu” - “Options” - country Finland or Germany - menu “Settings” - “Auto search” - method of connecting to TV “Cable” - “Settings”: search type fast, Frequency (kHz), Speed. characters, Modulation, Network ID: auto - save all parameters.
  Be sure to turn off " Automatic update channels", otherwise the TV will periodically reset the channel list you have configured.