Zte v790 official firmware. ZTE V790: review, specifications, firmware and owner reviews. Required to get Root

If in Russia and some other CIS countries the ZTE V880E is usually understood as a dual-SIM smartphone, in Belarus it is more associated with a single-SIM phone from Velcom. This is his main difference from his fellows. In general, this is not the first smartphone from ZTE, flashed for Velcom. Velcom already has sufficient experience in selling budget and at the same time good ZTE models, encoded for its network.

For those who are more interested in the issue of unlocking the ZTE V880E Velcom, this is described in detail in this. Despite the fact that the article describes a way to unlock for Dual sim, this method is also suitable for firmware ZTE V880E Velcom. Only after flashing the phone will be recognized as a dual-SIM. But below is an instruction on how to return from a dual-SIM 4.0.4 firmware to a single-SIM zte v880e with Velcom 4.0.4 firmware.

Instructions for migrating from ICS 4.0.4 to 4.0.4 Velcom

  • First of all, be sure to do Backup QPTS exactly like in this one.
  • Download Velcom and unpack it. Then we throw the "clockworkmod" folder onto the SD card.
  • We download it and, without unpacking, we throw it onto the SD card.
  • Turn on USB debugging and connect the smartphone to the PC. We put, for which we run "recovery6.0.1.2.exe" and press enter until the end of the process. After the process is complete, the smartphone will restart.
  • Turn off the smartphone and, holding "sound +" and "on" go to Recovery.
  • Choose: "install zip from sdcard" - "choose zip from sdcard" - "update.zip" - "Yes" - "Install update.zip". Installation begins. The installation will take a long time, so don't worry.
  • After the installation is complete, without leaving recovery, press the "back" arrow and execute all the wipes. ("Wipe data / factoty reset", "wipe cache partition" in mounts and storage, execute "format / cache", "format / data", "format / system").
  • Then we go to " backup and restore "-" restore ", there will be a backup number, click on the backup number and confirm" yes -restore ".
  • After completion, click "reboot system now". The velcom 4.04 firmware will be loaded for two Sims, but it will not see the Sim-card. It's not worth worrying, it should be so.
  • Download the official one for and upload it from the update.zip archive to the sd card.
  • Turn on USB debugging and download this , unpack it and run recovery.bat. We press Enter until the process is complete. After the smartphone restarts, turn it off.
  • Holding down the "sound -" and "on" keys, we get into the FTM mode. We connect the phone to the PC and restore the Backup shot by QPTS. After the process is complete, the smartphone will restart. After rebooting, you must turn off the phone again.
  • We go to Recovery.
  • We make wipes ("wipe data / factoty reset", "wipe cache partition").
  • We select “apply update from external storage "-" update.zip "and install the selected velcom official firmware.
  • After completion, select "reboot system now"
  • The phone will reboot and it will be installed official firmware 4.0.4 from velcom. In fact, the phone was returned factory firmwareso all rights are reserved.
  • In case of problems with the sensor, it needs to be calibrated. To do this, dial * 983 * 0 # and select SENSOR, then click on calibration.

We perform similar manipulations when replacing in single symbol zte v880e firmware 2.3.6 to the official 4.0.4. Below is the instruction.

Instructions for upgrading from official firmware 2.3.6 to official 4.0.4

  • Making a QPST backup
  • Download the official firmware 4.0.4 for zte v880e velcom and upload update.zip from the archive to the SD card.
  • Download this one (before that, enable USB debugging) , unpack it and run recovery.bat. Similarly, press Enter until the process completes. After the smartphone restarts, turn it off.
  • We go to Recovery.
  • We make "wipe data / factoty reset" and "wipe cache partition".
  • Select "apply update from external storage" then select update.zip (the firmware that was thrown) and install. If it gives an error, then you need to replace the file "update.zip \\ META-INF \\ com \\ google \\ android \\ updater-script" with (remove .zip).

The rest is performed in the same way as in the previous instruction.

ZTE KIS III V790 is a brand chinese smartphonewhich received 5 points for performance. Here you can download firmware (for all operators, firmware ROM), find out how to reset the settings or get root, There are also instructions on ZTE. This smartphone is high performance. On board - Qualcomm MSM7225A, 1000 MHz

Root on ZTE KIS III V790

How to get the root for ZTE KIS III V790 see instructions below.

Below are the universal programs for obtaining root-rights for devices on Qualcomm Snapdragon

  • (PC needed)
  • (Route using a PC)
  • (popular)
  • (root in one click)

If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Specifications

  1. Standard: GSM 900/1800/1900, 3G
  2. Type: Smartphone
  3. Operating system: Android 4.0
  4. Case type: classic
  5. Number of SIM-cards: 2
  6. Weight: 120 g
  7. Dimensions (WxHxT): 61x114x12.6 mm
  8. Screen type: color TFT, 262.14 thousand colors, touch
  9. A type touch screen: multitouch, capacitive
  10. Diagonal: 3.5 inches.
  11. Image size: 320x480
  12. Pixels Per Inch (PPI) 192
  13. Automatic screen rotation: yes
  14. Ringtone type: polyphonic, MP3 ringtones
  15. Vibration alert: yes
  16. Light indication of events: yes
  17. Camera: 3.20 million pixels
  18. Video recording: yes
  19. Audio: MP3, FM radio
  20. Headphone jack: 3.5mm
  21. Interfaces: USB, Wi-Fi, Bluetooth 2.1
  22. Satellite Navigation: GPS
  23. Internet access: WAP, GPRS, email POP / SMTP, HTML
  24. Processor: Qualcomm MSM7225A, 1000 MHz
  25. Video processor: Adreno 200
  26. Built-in memory: 1 GB
  27. Volume random access memory: 512 MB
  28. Support for memory cards: microSD (TransFlash), up to 32 GB
  29. MMS: yes
  30. Battery capacity: 1200mAh
  31. Sensors: illumination, proximity
  32. Book search: yes
  33. Organizer: alarm clock, calculator, task planner
  34. Announced date (ym-d): 2012-12-03

»

Firmware for ZTE KIS III V790

Official android firmware 4.0 [stock ROM file] -
Custom zTE firmware -

The ZTE KIS III V790 firmware can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. Unfortunately, the official ZTE website will not help solve this problem, but we will solve it for free. This model ZTE has on board Qualcomm MSM7225A, 1000 MHz, respectively, there are such flashing methods:

  1. Recovery - flashing directly on the device
  2. A special utility from the manufacturer, or
We recommend the first method.

What custom firmware are there?

  1. CM - CyanogenMod
  2. LineageOS
  3. Paranoid Android
  4. OmniROM
  5. Temasek's
  1. AICP (Android Ice Cold Project)
  2. RR (Resurrection Remix)
  3. MK (MoKee)
  4. FlymeOS
  5. Bliss
  6. crDroid
  7. Illusion ROMS
  8. Pacman ROM

Problems and disadvantages of a smartphone from ZTE and how to fix them?

  • If KIS III V790 does not turn on, for example, see white screen, hangs on the screen saver or the notification indicator only blinks (possibly after charging).
  • If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
  • Doesn't charge (usually iron problems)
  • Doesn't see the SIM card (SIM card)
  • Camera does not work (mostly hardware problems)
  • Sensor does not work (depending on the situation)
For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for ZTE KIS III V790

Instructions how to do Hard reset on ZTE KIS III V790 (factory reset). We recommend that you read the visual guide, which is called on Android. ...


Reset codes (open the dialer and enter them).

  1. *2767*3855#
  2. *#*#7780#*#*
  3. *#*#7378423#*#*

Hard Reset via Recovery

  1. Turn off the device-\u003e go to Recovery
  2. "Wipe data / factory reset"
  3. "Yes - delete all user data" -\u003e "Reboot System"

How do I log into Recovery?

  1. hold down Vol (-) [volume down], or Vol (+) [volume up] and the power button
  2. a menu with the Android logo will appear. Everything, you are in Recovery!

Factory reset on ZTE KIS III V790 can be done in a very simple way:

  1. Settings-\u003e Recovery and reset
  2. Reset settings (at the very bottom)

How to reset your pattern

How to reset pattern keyif you forgot it and now you cannot unlock your ZTE smartphone. On the KIS III V790 model, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

  1. Reset graph. blocking -
  2. Password reset -

Attempts to find a balance between price and functionality of the phone are not always successful for the manufacturer. A similar fiasco was the V790 from ZTE. Although the device was released in 2013, its characteristics are quite depressing.

Design

The appearance of the ZTE V790 is not particularly remarkable and resembles many devices of that time. The design of the front part and the rounded contours of the device make the smartphone more like HTC. Despite the beaten appearance, the phone came out pretty pretty.

The device is made of plastic, which does not add much solidity. The quality of the material leaves much to be desired, in some places the case bends and creaks. Scratches that appear incredibly quickly on the device will also become an unpleasant detail for the owner.

The back is made of corrugated plastic, which hardly collects prints. But the front part is not able to boast of special advantages. The display of the ZTE V790 is protected only by plastic, which is highly prone to scratches. also leaves much to be desired, prints on the case are very noticeable.

The front has become a haven for a small screen, four touch buttons, dynamics and sensors. The left end has acquired a volume control, while the right one remains empty. The back of the device houses the main camera, unfortunately, without a flash, a logo and a speaker. The headphone jack and the power button are located on the top end, and the USB jack along with the microphone is on the bottom.

The device turned out to be very tiny and weighs only 120 grams. This greatly affects its use. Corrugated rear end together with their low weight allow you to comfortably hold your smartphone.

Although the design is not too sophisticated, it is very attractive. The only downside is the machine's tendency to pick up scratches. The user will definitely need to get a case for their companion.

Display

The screen installed in the ZTE V790 is confusing. Although the phone was launched back in 2013, the display's performance is terrible.

The smartphone is equipped with a small diagonal of only 3.5 inches. For not the most modern state employees, this size is quite acceptable, the problems begin further. The screen uses an outdated TFT matrix, which definitely does not improve its quality.

Although the screen size is small, the manufacturer chose not the best resolution for it. The display received only 480 by 320 pixels. Accordingly, the image is very grainy. In addition, the screen received only 262 thousand colors.

The ZTE V790 sensor does not improve the experience either. It only supports two touches at a time. This is enough to work, but this parameter is not very pleasant.

Old matrix technology shows no top scores in bright light. The display fades a lot in the sun, even at maximum brightness. The distortion of the picture due to the TFT technology, which does not give the necessary for the owners, is also depressing, they say that with a slight tilt, the image is poorly viewed.

It's strange to see such poor screen quality in a 2013 product. Only the low cost of the smartphone justifies the manufacturer.

Camera

The ZTE V790 has 3.2 megapixels. Similar cameras were encountered back in 2005, and it is quite unexpected to see such a characteristic on a modern device. Actually, you don't have to wait for even mediocre pictures.

The camera has a resolution of 2048 by 1536 pixels, which slightly improves the quality. When shooting distant objects, there is a lack of sharpness and distortion occurs, which is quite expected. By photographing the subject too close, the user will only get a blurry picture.

The camera lacks not only a flash, but also most of the necessary settings. Most likely, the use of the device's camera will be minimized due to the poor quality.

Hardware part

The manufacturer paid much more attention to the filling of the ZTE V790. The characteristics are rather weak, but quite acceptable for state employees. The device has got a SnapDragon processor, which is very good. Unfortunately, the device has only one core with a performance frequency of 1 GHz. The Adreno-200 is not the worst accelerator responsible for the graphics.

512 MB of RAM looks quite good too. Although this is the minimum indicator for an Android device. The situation with native memory is much worse. The ZTE V790 smartphone is equipped with only one gigabyte. This characteristic is not enough even for everyday tasks.

Smoothes the position of the possibility of expanding a USB flash drive. The device supports a card up to 32 GB. The user will definitely have to increase the volume, since there is not enough native memory even for the most necessary applications.

The device cannot be called nimble, although the performance is quite enough to work with many programs. For example, quite demanding Skype works without much slowdown. However, the situation is completely different with games. The phone handles simple casual apps, but more advanced ones don't work well.

Autonomy

The manufacturer installed an unsuitable battery for the ZTE V790. The owner will get a device equipped with a 1200 maH battery. Such a battery is not capable of providing good autonomy.

Minimal use of the device will allow it to last a day without additional charging. More active work of the device will reduce its life to four hours. The maximum load will allow the owner to work with the device for only two hours.

The most voracious features are Wi-Fi and GPS connections. They are the ones who consume most of the charge. By monitoring these functions, you can significantly increase battery life.

Refusing to use all the capabilities of the apparatus is not the best way out. Replacing the battery will help to resolve this situation. A more capacitive battery analog will allow the owner to be less dependent on the outlet.

System

The firmware installed in the ZTE V790 will delight the owner with the fourth version of "Android". Quite an unusual solution for a rather weak device. Although not to complain, version 2.3 would have looked much worse.

The system does not differ in special delicacies. The company has changed some features of the exterior, but in general, the interface has remained standard. The device contains standard Android applications, but the proprietary shell is not observed.

If necessary, you can flash ZTE V790 using FOTA or using custom versions of Android. However, the smartphone does not really need updates, they will not bring cardinal changes in work.

Price

You can become the owner of a phone for only 3 thousand rubles. The cost looks very attractive, although there are more successful devices with a similar price. Considering the fact that the smartphone is out of production, it will be very problematic to find it on the shelves.

Equipment

The device comes with headphones, adapter, USB cable, instructions. Quite a standard set. In addition, the owner needs to tune in in advance for additional spending. For example, to protect the glass of the ZTE V790, you need a film, and for the case you need a cover. There is also an urgent need to expand the memory with a flash drive.

Communication

The phone supports two SIM cards and works only in gSM networks... When making calls, one of the cards goes into standby mode, since the device has only one radio module.

Supports smartphone and functions mobile internet, Wi-Fi, Bluetooth and GPS. By the way, the phone determines the location in just 10 seconds.

Negative reviews

The Achilles' heel of the device is its display. The small size of the screen affects the convenience of working with it, and the low-quality picture is striking.

The smartphone's camera has also become an unpleasant detail. The outdated matrix does not allow taking images of average quality. This feature is aggravated by the absence of additional settings.

The duration of the work also leaves much to be desired. Although the phone, having two SIM cards, is clearly intended for calls, in fact the device is enough for four hours of talks.

Positive reviews

The main advantage of the device is its price. The democratic cost for a device with two SIM cards is very attractive and captivates many buyers.

A good choice of system also cannot be ignored. "Android 4.0" shows itself only from its best side. The owner doesn't have to worry about installing the latest version.

Outcome

For the most part, the idea of \u200b\u200bmaking a cheap and functional public sector employee has failed completely. Although the device was equipped with many useful abilities, the manufacturer decided to save money on most of them, which led to sad consequences. As a result, the smartphone became obsolete during production.

Lacks functionality on purchased Android smartphone ZTE V790? Want to get root rights on this smartphone? Website and article receiving Root ZTE V790 will help you!

What is Root?

For those who have just become a beginner or are not an expert in the huge world of Android and are not particularly familiar with the concept of how - Root Android , and also why it is needed, what can be done after obtaining Root rights, or how to get rid of them later if they are no longer needed, all this can be found in the detailed article -!

Primarily!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required components and conditions, the second part is Instructions how to get root rights using the received files and programs. If in the process of getting root android rights constantly reboots or in the process of perpetual loading (it happens extremely rarely, but still), it's worth it. Now let's get down to getting Root rights!

Android manufacturers sometimes release new firmware, on which it is impossible to get Root using one of the proposed methods, if the article contains more alternative ways, try them. Doesn't it work all the same? Please indicate android version and the firmware version in the comments (do not write angry shit comments, you will not put yourself or others with this). Android hangs (does not load), read and re-read from the very FIRST PUBLIC, all the necessary links in the article are present!

Still have questions?

Still have questions or are unable to root your Android? Leave comments about what you did or failed, or you did differently.

Required to get Root

1. Computer or laptop (Windows XP / Vista / 7/8 / 8.1)