We deliver throughout Russia. We deliver throughout Russia. How much does a battery cost for an ipad 3?

Often an old iPad 3 requires replacement of the battery due to the fact that its battery life has expired, and working constantly with the charger on is inconvenient and unnecessary. Accordingly, the question arises: is it possible to change the battery on iPad 3 yourself without turning to the services of service workshops?

In principle, why not, but only if you are professionally savvy and mentally prepared to completely disassemble the iPad. Please note that the battery is attached to the back cover of the case and to get it out you will have to disassemble the case, unscrew a bunch of bolts, remove a lot of cables and metal plates, and disconnect the wires. All this will need to be done carefully, not forgetting about the subsequent assembly of the device, during which it is important not to mix up the correct bolts and secure all the disconnected parts in the exact sequence.

If you are not afraid to get started, what is your business, we are ready to help you correctly and consistently perform all the necessary actions.

To start disassembling the iPad, be patient and have some tools: a new original battery, a hair dryer, a set of special screwdrivers and spatulas, a plastic pick, glue for gluing the battery to the case, a metal spatula.

First you need to separate the upper part of the tablet body from the lower one. Take a plastic or metal spatula in your hands and at the bottom right of the “Nome” button, try to carefully, without damaging the body, pry up the crack to insert the plastic pick, and then, moving along the lower contour, gradually detach the surface of the panel, helping with the pick and spatula. If the surface is difficult to give in, then turn on the hairdryer and heat the lower back surface of the panel so that the glue connecting the two sides of the case softens and becomes more pliable, but do not heat it too much.

Then, when the gap becomes larger, lift the bottom of the panel slightly to disconnect the cables and wires under the “Home” button, then unscrew the bolts around the perimeter of the panel one by one. At the top, you need to unscrew several bolts from the protective plate and remove it, so that under it, using a plastic spatula, you can disconnect all the cables one by one.

After this, the upper part with the display is freed and you can put it aside to begin disassembling the lower or rear part of the case, where all the hardware is located. Next, disconnect the two battery cables. On top, near the main camera, you need to unscrew the three screws on the metal plate with a special screwdriver to remove it. Under it there are camera cables that need to be disconnected using a plastic spatula.

The next thing is to unscrew the bolts on the side to release the remaining cables. After the battery is disconnected from any cables, remove the plate on which the micro boards are located.

Now all that remains is to remove battery. To do this, use a hairdryer to blow through the rear outer surface of the case to soften the glue under the batteries, since its area is large and practically occupies the entire back cover. Then, using a wide plastic flat spatula, which we put behind the battery, and forward movements up and down, remove the remaining glue so that the battery comes away from the cover. When most of the battery is disconnected, you can use your hands to help remove it completely.

Installing a new battery

In place of the removed battery, pour special glue diagonally and install the original one tightly. new battery for iPad. Next, we assemble the iPad in negative sequence. First, we install the large plate with microcircuits in its place and connect all the cables. We screw all the plates with the same bolts that were removed. Carefully install the cameras in their place and connect the cables to them. We secure the metal plate covering the cables with three bolts, and connect the remaining cables and cables in place.

Replacing the iPad 3 battery becomes necessary when the battery begins to overheat or fails due to failures in the gadget's hardware unit, problems in the system shell, manufacturing defects, or natural aging during use. Replacing the iPad 3 battery may be necessary due to the use of non-original charging modules, shock or moisture in the device.

How to replace the battery on iPad 3: practical instructions

IN service centers For the service “replacing the battery for iPad 3” the price varies within certain limits, but with the use of your own knowledge and skills, for a procedure such as replacing the battery for iPad 3 it will be significantly reduced - just purchase the necessary tools and modules.

Equipment

During the replacement you will need the following tools:

• metal spatula;
• Philips screwdrivers No. 00 and 0;
• double-pointed spudger;
• a set of picks of various thicknesses (6 pcs);
• The opener is double-sided.

Required parts: new battery, adhesive replacement tapes for fastening.

For an operation such as replacing an iPad 3 battery, the price will be based on the cost of tools and spare parts necessary for the work.

Preparatory stage

Rules for heating the thermal bag

The thermal bag must be heated in a microwave oven, after cleaning it first, so that food residues do not stick to the heating pad. When heating, the bag should not touch the walls, otherwise its heating will be uneven and the product will be damaged. The heating pad warms up each time no longer than 30 seconds. Overheating leads to an explosion, and then an event such as self-replacement batteries for ipad 3 the price will increase significantly.

Do not touch the bag if it looks swollen. Reheating is permitted after complete cooling. A properly heated product retains heat for up to 10 minutes. You need to move the bag by its flat edges, without touching the central hot part. You can use an oven mitt to avoid getting burned.

Preparing for disassembly

If there are cracks on the glass of the gadget, then replacing the iPad 3 battery is fraught with further cracking and the possibility of injury from it. To do this, it is covered with an overlap of adhesive film. This will keep the shards in place as you move the display body. Eyes must be protected with special glasses.

Process

1. A thermal bag is placed on each side of the iPad in turn. While work is going on to open one face, the bag heats up the glue on the next one.
2. There is a two-inch (about 5 cm) gap in the adhesive layer on the top right edge of the iPad. This vulnerability must be exploited to replace the battery on iPad 3. They start by inserting the blade of a double-sided opener into the gap. It may take some effort. The opener must be deepened slowly, carefully, moving it back and forth, controlling the process. Make sure you are going to insert the opener in the correct location between the plastic display frame (black/white) and the front panel glass.
3. The tip of the opener, inserted between the front glass and the frame, must be held while one of the six picks, suitable in thickness, is inserted into the gap.
4. Start opening the adhesive layer of one of the edges. To do this, slide the pick along the edge inside the gap. The sticky layer is very strong, you will have to apply some force, but this must be done carefully.
5. If the tip of the pick becomes visible through the glass, you need to reduce the depth of its depth. Penetration that is too deep may cause adhesive residue to spread throughout the matrix.
6. Before removing the first opening pick from the right slot, insert a second one into the open slot to prevent the adhesive layer from sticking together again.
7. Move the pick along the gaps of each edge, cutting the glue, but without touching important modules: antenna assemblies, camera, cable to the display. Otherwise, the risky undertaking of “replacing the iPad 3 battery yourself” will not only increase the price by several orders of magnitude, but the gadget itself may be completely damaged.
8. When the entire sticky layer is cut, use the hand suction cup from the kit and mediators to separate the glass. This is done carefully, slowly, each time heating the perimeter with a thermal bag.
9. After removing the glass, remove the film and use screwdrivers to unscrew the accessible screws. The matrix is ​​connected by several cables, so it can only be lifted in the area of ​​the camera using a spatula. The raised matrix is ​​carefully turned on the wires and laid on a soft, lint-free surface.
10. The cable plug is unscrewed and opened, and the matrix body is removed.
11. To replace the battery on an iPad 3 without causing damage, carefully disconnect the cable of the physical navigation key, remove the front panel, unscrew the necessary bolts, and disconnect the antenna, speaker, microphone, and case button modules. When disconnecting cables, force is applied by holding the connectors, not the wires.
12. To remove the back cover and replace the battery on the iPad 3, you need to apply heating with a thermal bag again. The glue is softened very carefully. The motherboard is separated using mediators. You still need to make sure that delicate areas are not damaged; haste is not applicable here. All elements must be separated from the device one by one, layer by layer. Heating must be carried out constantly.

Battery change

1. Once the battery is accessible, the plastic cards in the tool kit will help you remove it. Their use must be careful so that the battery body does not bend or become damaged, which could result in the release of toxic compounds. Before removing the battery, the adhesive layer is also heated. Manipulate the cards - while one of them holds the opened gap open, the second can open the next gap. The use of a metal spatula or battery opener will help in the work.

The iPad 3 battery is being replaced instead of the used one. All steps are repeated in reverse order to assemble the iPad.

Large catalog of iPad 3 (A1416/A1430/A1403) Wi-Fi+ LTE cases with different prices. Buy iPad case 3 (A1416/A1430/A1403) Wi-Fi+ LTE for a phone in an online store is very convenient. Place your order online on the website.

The proposed battery for tablet computer iPad 3 has a lot of positive advantages. Firstly, the product, being ideal for the mentioned gadget in terms of dimensions, technical parameters. Secondly, the model has a paper confirming both the initial serviceability and a long period of useful service. Thirdly, as a bonus, when you order this accessory, you will receive a set of specialized tools. And also, taking into account everything indicated (warranty, set of tools), the price of this product is more than affordable.

The following can cause the battery of your iPad 3 tablet to break down:

Moisture getting under the gadget's body;

Mechanical damage (compression, impact, fall);

Incorrect operating mode (starting charging before the battery is completely discharged) and the like.

However, no matter what reason caused the malfunction in your particular case and no matter how exactly the breakdown manifests itself (decreasing the period of uninterrupted operation; increasing the time required for full charging), only one thing will help solve the problem with a 100% guarantee. We are talking about purchasing the battery offered for iPad 3 in our store.

Why is it better to buy a battery for the iPad 3 tablet computer from us? Firstly, it is worth noting the high quality of this accessory. How, you don’t know what exactly is hidden under the term “”? This word indicates, firstly, that the proposed battery was created specifically for the above-mentioned tablet computer model, which means it will ideally match it in both technical and dimensional parameters. And the word “” is usually used only in relation to those parts and spare parts that were made from the best components in accordance with current standards and regulations.

Secondly, this battery can also boast of the presence of paper confirming both initial serviceability and long useful life. Of course, we're talking about about the guarantee. By the way, the presence of a warranty for modern consumables, spare parts, and parts is the exception rather than the rule, please keep in mind.

Thirdly, when ordering this product from us as a free gift, you will receive small set specialized tools, which include spatulas, screwdrivers, suction cups, etc., etc. Using all this, you can easily and quickly replace the battery of your tablet computer with a new battery on your own. However, no one will forbid you to repair others in the future. mobile phones, tablets, using the same set.

And also, taking into account all the advantages and features listed above (a warranty, a set of tools, the cost of this battery for the iPad 3 is very, very affordable.

We have stores in the following cities:

Abakan, Alexandrov, Almaty, Almetyevsk, Anapa, Armavir, Artem, Arkhangelsk, Asbest, Astana, Astrakhan, Atyrau, Achinsk.

Balakovo, Balakhna, Balashikha, Barnaul, Belgorod, Berdsk, Berezniki, Biysk, Blagoveshchensk, Bratsk, Bryansk.

Velikiye Luki, Veliky Novgorod, Vidnoye, Vladivostok, Vladikavkaz, Vladimir, Volgograd, Volgodonsk, Volzhsky, Vologda, Vorkuta, Voronezh, Voskresensk, Vyborg.

Gatchina, Gelendzhik, Georgievsk, Glazov, Gorno-Altaisk, Grozny.

Dzerzhinsk, Dzerzhinsky, Dimitrovgrad, Dmitrov, Dolgoprudny, Domodedovo, Dubna.

Evpatoria, Ekaterinburg, Essentuki.

Zheleznodorozhny, Zhigulevsk, Zhukovsky.

Zabaikalsk, Zelenograd, Zlatoust.

Ivanovo, Ivanteevka, Izhevsk, Irkutsk, Istra.

Yoshkar-Ola.

Kazan, Kaliningrad, Kaluga, Kamensk-Uralsky, Kaspiysk, Kemerovo, Kerch, Kirov, Kiselevsk, Kislovodsk, Klin, Kolomna, Kolpino, Komsomolsk-on-Amur, Korolev, Kostroma, Kotelniki, Krasnogorsk, Krasnodar, Krasnoturinsk, Krasnoyarsk, Kurgan, Kursk

Lesnoy, Lipetsk, Lobnya, Lukhovitsy, Lytkarino, Lyubertsy.

Magadan, Magnitogorsk, Maykop, Malakhovka, Makhachkala, Mezhdurechensk, Miass, Mineralnye Vody, Moscow, Moscow and the Moscow region, Moscow, Murmansk, Mytishchi.

Naberezhnye Chelny, Nadym, Nalchik, Naro-Fominsk, Naryan-Mar, Nakhodka, Nevinnomyssk, Neftekamsk, Nizhnevartovsk, Nizhny Novgorod, Nizhny Tagil, Novokuznetsk, Novorossiysk, Novosibirsk, Novouralsk, Novocherkassk, Novy Urengoy, Noginsk, Norilsk.

Obninsk, Odintsovo, Ozersk, Oktyabrsky, Oktyabrsky (Rep. Bashkortostan), Omsk, Orel, Orenburg, Orekhovo-Zuevo, Orsk.

Penza, Pervouralsk, Perm, Petrozavodsk, Petropavlovsk-Kamchatsky, Podolsk, Prokopyevsk, Pskov, Pushkin, Pushkino, Pyatigorsk.

Ramenskoye, Revda, Reutov, Rostov-on-Don, Rubtsovsk, Rybinsk, Ryazan.

Salavat, Samara, St. Petersburg, St. Petersburg and Leningrad region, Saransk, Saratov, Sevastopol, Sergiev Posad, Serov, Serpukhov, Simferopol, Smolensk, Snezhinsk, Sovetsky, Solnechnogorsk, Sosnovy Bor, Sochi, Stavropol, Stary Oskol, Sterlitamak, Stupino, Surgut, Syzran, Syktyvkar, Sysert.

Taganrog, Tambov, Tver, Tolyatti, Tomilino, Tomsk, Tula, Tyumen.

Ulan-Ude, Ulyanovsk, Ussuriysk, Ufa, Ukhta.

Feodosia, Fryazino.

Khabarovsk, Khanty-Mansiysk, Khasavyurt, Khimki, Khotkovo.

Cheboksary, Chelyabinsk, Cherepovets, Chekhov, Chita.

Shadrinsk, Shakhty.

Shchelkovo, Shcherbinka.

Elektrostal, Elista, Engels.

Yuzhno-Sakhalinsk, Yuzhnouralsk, Yurga.

Yakutsk, Yalta, Yaroslavl.

Computer wizard. Rating: 5.0 ⭐️⭐️⭐️⭐️⭐️
Computer technician with 15 years of experience 1 year warranty
September 1-7, everyone who calls from Avito gets a 50% discount
1. My work experience is more than 15 years. Have a technical education
2. I am a private master, so the prices are the lowest
3. I work online and on location
4. I work on location throughout Moscow and the region
5. Computer help no days off or holidays
6. Warranty on all work - 1 year

FOR FREE:
- Departure
- Diagnostics
- Warranty on all work performed - 1 year
- Help by phone, any consultations
- Remote assistance TeamViewer

AT THE LOWEST PRICES:
- Repair of PC computers, PC monoblocks, laptops, netbooks of all brands
- Installation reinstalling Windows 7 8 8.1 10 XP Vista Windows Linux Linux Mac OS X macos poppy OS
- Installation of any drivers
- Installation of antivirus kaspersky kaspersky avg eset doctor web dr web avast panda
- Installing an ad blocker in the browser and other places
- Installation and configuration of any office game programs microsoft office 2003 2007 2010 2013 2016 Adobe Photoshop Lightroom adobe photoshop lightroom corel draw coreldraw autodesk autocad autocad etc
- Setting up the Internet of your home and mobile router wi-fi modem wi fi wifi wifi wifi wifi wifi wifi wifi
- Removal of viruses, Trojans, SMS (sms) banners (ransomware), malware, cleaning the system from debris
- Cleaning dust from laptops and computer system units (cooling system, processor, video card, etc.)
- Replacing laptop thermal paste and system units on the processor, video chip
- Replacement and installation of any computer components, laptop, netbook, all-in-one, network card fan cooler dvd rom screen power supply speaker video card ram ram processor RAM floppy drive keyboard screen matrix motherboard hard drive ssd ssd
- Installation and configuration of laser, inkjet, MFP, printer, scanner, copier, camera, etc.
- Assembling PC computers to order (much cheaper than buying an assembled PC)
- Windows installation Windows on Apple Mac mini macbook pro air imac MacBook aimac bootcamp virtual bootcamp
- Repair of smartphones, iPhones, tablets, iPads, ios, android
- Replacement (repair) of the power socket (charging connector)
- Cleaning repairs from flooding (with water or any other liquid)
- iPhone repair iPad iPod glass button battery display screen replacement
- Replacing the battery firmware bios bios disk partitioning
- Companies I work with Acer Asus Samsung HP Lenovo Dell MSI Sony Toshiba Lenovo Apple etc.
Professional computer help
Private owner
Private professional computer technician
Computer help at home
Computer technician Moscow
Computer help Moscow
Computer technician at home
Computer help urgently
Computer technician urgently
Computer help
Experienced computer technician
Computer help area
Computer technician area

ADD TO BOOKMARKS TO NOT LOSE, PRESS Ctrl and D