How to unlock MTS Wi-Fi modem. How to Unlock a Huawei Modem for Free From Mobile Operators MTS, Megafon, Beeline, Tele2. Unlocking Huawei modem

The Megafon company offers its users a 3G/4G router MR100 3 for distributing the Internet and surfing the network. The device is a complete analogue of the Altel 4G E5372 and Huawei E5372 models. When connected to a PC, the device can be used as a regular modem.

The router's parameters are not much different from its predecessors

The router is capable of distributing the Internet to ten users at the same time, with a radius of action of 10 m. The client can be a tablet, mobile gadget, laptop or regular computer. Let's consider more detailed characteristics and features of setting up the Megafon MR100 3 device.

• Battery 1780 mAh;
• support for distribution to up to 10 users;
• possibility of use microSD cards up to 32 GB;
• TFT-LCD display;
• interfaces for SIM card, microDS, micro USB, Wi-Fi;
• 130 grams;
• 100 Mbps over LTE 4G.

Interestingly, information will be transmitted and received slowest using EDGE/GPRS technology (no higher than 236.8 Kbps). As for the main communication capabilities, these are: GSM, TDD, WCDMA, EDGE, FDD, GPRS.

The MR100 3 device is equipped with special connectors for antennas. The developers thought of this option in order to be able to strengthen the signal in case of weak reception.

Another interesting feature is that the router can be used as Charger For Bluetooth headsets, mp3 players, as well as smartphones.

With occasional surfing, the router can work for about five hours. These indicators will be enough to create an Internet zone at a party, meeting with friends or at any event.

Contents: battery, device, instructions and cable for synchronization and charging.

Users like it appearance this model. The router fully satisfies mobility requirements and fits in a shirt or trouser pocket. We also note that the Megafon MR100 3 router will not become a heavy burden for a handbag.

Connection

Before you begin setup, it is important to connect your SIM card. The slot for it is located under back cover. So, remove the cover, take out the battery and place your card, as well as microSD (in another slot). Why do you need a memory card on such a modem? Users who access the network through Megafon MR100 3 will be able to store images, music, videos and documents on such a card.

If the device is not new, return to initial settings, holding down the Reset key for a couple of seconds.

All manipulations for setting up the MR100 3 are performed through the web interface. You can access it by typing the address indicated on the device itself. Most often, the address is written under the battery on a sticker.

Interface and setup

Here you will see several tabs with which you can configure the router to suit your needs. On the main page, for example, you can see the WLAN status, as well as the current connection.

The “Statistics” tab shows the traffic limit, the amount of data received, and information about clients who connected to the wireless network.

If you need to send an SMS message through the interface, go to the SMS item. The SMS center configuration is also configured here.

The balance of money in the account is checked in the “Balance” item. It also provides information about the user number. Among other things, the user in this section can activate the card to top up the account.

To set up the Internet, it is customary to use the Wizard quick installation. The procedure consists of three simple steps. All that is required from the user is to follow the instructions provided. If you know a little about the topic, you can change the parameters in the “Settings” section. There are WLAN, System and Security items. To set up the Internet, go to the “WLAN” section, then set the following parameters:

• SSID - come up with a name for the network;
• encryption mode - AES-TKIP;
• key - create a password;
• encryption - WPA/WPA2-PSK.

This data will allow you to make the modem an access point and distribute the network.

Firmware

Firmware updating for the Megafon MR100 3 router is performed in the “Update” interface tab. Everything is extremely simple - the device independently determines whether there is this moment new software. If a more recent version is available, the system will send a special notification and install everything automatically. Of course, experts recommend not to interfere where they are not asked if the device meets your requirements. In other words, you should not improve or modify anything without a specific need.

Unlock

The device must be unlocked if there is a need to use it in conjunction with another provider (not Megafon). The option is provided by the development company, so the unlocking operation itself does not look complicated. If the Megafon MR100 3 router is not unlocked, when using an MTS or Beeline card, you will see the message “Blocked” on the device panel. In addition, the system in the interface will ask you to enter the unlock code. Such codes are sold on the Internet at minimum price. If it is really important for you to configure this gadget to work with different companies, we recommend purchasing a code.

In addition, to unlock the modem, you can use the DC Unlocker utility, which can be downloaded for free online.

Unlocking and flashing a modem, be it Beeline, MegaFon, MTS, Tele2 or any other, despite the simplicity of the action, is a responsible step. And yet it’s worth it - the reward will be complete freedom of choice best tariff any of the cellular providers.

a 3G/4G

The motivation for the firmware is to change the tariff of the cellular provider without having to buy one for each of them modem.

The fact is that in pursuit of additional profit, the cellular company blocks the use of SIM cards from competing operators. In a good way, there are no physical reasons to prohibit the use, for example, in modem e, sold by Beeline, SIM from MegaFon, MTS, Tele2, Yota, Rostelecom and regional operators. All modem We use the same 3G and 4G standards (UMTS-900/2100 and LTE-800/2600, where the number indicates frequencies in megahertz). And here it becomes possible to “untie”, for example, device Huawei E1750 or router ZTE-MF90+ from MTS or Beeline.

Cell phone unlocking methods modem ovs and routers

There are three approaches to unlocking:

Here are completely free and proven methods. There is no need to buy any “loans” or anything else - modem s and routers can be unlocked for free if desired, and after unlocking they work flawlessly for 10 years or more.

How to unlock and flash modem s from Beeline

Don't do it to yourself unnecessary problems! Often you can limit yourself to a simple unlock modem but without reflashing it. This is the easiest way - your device will work for 100%, because the highest goal of the subscriber is to get rid of the “binding” to the operator. Firmware only makes sense when modem or the router supports more high speed, but its “native” firmware prevents it from overclocking (software limit maximum speed connections, “built into” the current version of the software, cannot be disabled in any other way) - this was the case, for example, in the first LTE- modem ah Yota and in 3G- modem e Huawei E1820.

How to unlock and flash modem ZTE MF180 (Beeline) for all SIM cards

When connecting to a PC USB port for the first time modem installs the program "USB- modem Beeline is an application imposed by Beeline.

Previously, it was called BID (“Beeline Internet Home”). The size of the program window is set rigidly, closes everything on the desktop Windows desktop. Inconvenient.

You can unlock the ZTE MF180 by replacing its native program, for example, with “MTS Connect Manager”. Before flashing the firmware, the Beeline and MTS versions may be incompatible, which is why the PCUI.VN file in memory needs to be replaced modem A. For flashing ZTE MF180 needed:

Easily found on the Internet.

Use a laptop, preferably with Windows XP SP3. Do the following.

Go to the dispatcher Windows devices("Start - Control Panel - System - Device Manager") and check virtual devices modem and ZTE MF180, for which the appropriate drivers have been installed, in particular, ZTE Diagnostics Interface. Remember which COM port this device is on - it will be useful in QPST.
COM Diagnostics Interface

Run the QPST program and add the ZTE Diagnostics Interface port to it.
The application is ready to find the modem port

Click the add new port button.
Select your ZTE DI port

The header of the new device with your COM port is available. Launch the QPST - EFS Explorer component ("Start - Programs - Accessories - EFS Explorer").
EFS Explorer detected a port with a modem

Confirm the port selection - the files will open your modem device.
There should be pcui.vn, because of which the modem does not accept other people's SIMs

Close EFS Explorer and run the MTS firmware (original file DL_MF180_MTS_RU_EUV1.00.03.exe). IN Windows versions Vista and later “firmware” from “MTS” is launched with administrator rights.
It is important that the PC power does not reset

Once you have clicked the download button, device it will be sewn. This will take up to 20 minutes. Don't touch anything!!! Interrupting the firmware can damage the modem!
You have successfully flashed the modem

After finishing the firmware, remove the Beeline program from the PC and use modem point no restrictions with unlimited tariffs any operator. When reconnecting modem a to USB port MTS Connect Manager will be installed.

Don't forget to set up network profiles by checking the APN with the relevant operator. If you have active Internet access without settings, APN settings will not be needed.

ZTE MF180 firmware for specific networks

Instead of MTS Connect Manager, you can download any software, be it MLT (MegaFon of Tajikistan), Egyptian Etisalat or other at your discretion. Sometimes they do this - their firmware may contain a “cured” PCUI.VN - then they change it to our Russian one.

If you are flashing for Yota, keep in mind: on “ modem nom" Yota tariff won't let 3G- modem s to the 3G network from MegaFon! This is the company's policy and marketing, unfortunately. No one has yet been able to bypass this limitation directly. You need a “smartphone” or “tablet” SIM - with these tariffs you can use the 3G network, but you need to change the IMEI and fix the TTL. It’s easier with other operators: they don’t yet have a tariff exclusively for modem devices (only for 4G), you can also use the 3G network (where there is no 4G yet) without much difficulty.

The main disadvantage of the ZTE MF180 is that it does not have HSUPA technology (high-speed uplink up to 5.76 Mbit/s). Only 384 kbit/s is available for transmission from the subscriber (limited WCDMA speed according to the 3G specification) and incoming speed (HSDPA) is only up to 3.6 Mbit/s, therefore these modem They are already considered old.

Firmware and unlocking ZTE MF823D

This device still popular- its mass start of sales occurred in 2015 along with the ZTE MF90(+) routers. These models support incoming speeds (DC-HSDPA+) up to 42 Mbit/s for reception and outgoing (HSUPA) up to 5.76 Mbit/s for uploading in 3G networks, and also provide up to 75 Mbit/s (in both directions) in networks 4G (LTE). Using them is a joy: the Internet channel becomes more symmetrical and allows you to satisfy the appetite of the most sophisticated subscribers who consume hundreds of gigabytes of traffic monthly, and are also useful when working via the Internet, where urgent sending of attached files by mail and transmission of video from objects and video chat (video conferencing) are required ) in good quality.

Modem The ZTE MF823D is controlled not from a program, like its predecessors of previous years, but from any browser at m.home/index.html (or 192.168.0.1 by default): configuration and monitoring are carried out via a web interface, thanks to which you can local network connected to the Internet from this modem and, manage its settings. Its firmware does not put in Windows system separate application, and after installing the drivers, ZTE creates only the “Beeline Internet” shortcut. But this does not mean that it will be less easy to unlock. Do the following.

Run command Windows string with administrator rights and give the commands: cd \ (if the file is saved on drive C:) and copy /b diag1F40_F0AA.bin COM8 (port number on which the modem). Application command line will report successful copying of the file.
File copied

Install a terminal emulator such as Putty application, connect to the ZTE Diagnostics Interface port and enter the command AT+ZCDRUN=F. Modem will again be available as a CD-ROM, only now it will be unlocked.
Connect to your port and enter your commands

All! Modem ZTE MF823 unlocked. Go to its web interface and enter the settings of all operators.

Unlock modem s Huawei

Unlocking Huawei is much easier than ZTE. You need an unlock code calculator - you can use it to unlock dozens of models:

• E137,
• E171,
• E173Cs-1,
• E1732,
• E173,
• E1815,
• E272,
• E303,
• E303 HiLink,
• 320s(E3121),
• E3131(420d),
• E3276,
• E352,
• E353,
• E355,
• E357,
• E362,
• E363,
• E367,
• E368,
• E372,
• E392,
• E397,
• E398,
• E586,
• E5776 (821FT),
• E5776s-22,
• E589,
• E589u-12.

Do the following.

Download, install and run the “Huawei NCK Code Calculator” program (search, for example, using the phrase “lookdevices.ru huaweicalc_win32.rar”). The program will select an unlock code

After a few seconds, the code will be accepted and the SIM card will be registered in the network, modem will move to the 3G/4G network. All! You can use any network with any SIM - the unlock code is saved once, device will never ask him again.

Don't create unnecessary problems for yourself! Flash modems for all SIMs at once - and let them give full benefit, without preventing you from changing the tariff if something happens! Good luck!

Unlock, or unlock, modems and routers (sometimes the English word is used unlock - unlock) is the process of decoupling a device from an operator, allowing it to accept any SIM cards, of course, provided that the modem is capable of operating in a given standard and frequency range.

Although you can find “unlocked” devices on the market that are not initially tied to an operator and are sold under the brand of the company that issued them, most modems and mobile routers come to Russia through operators and are sold in communication stores under their brands. At the same time, they often even come up with their own line of models, the names of which do not coincide with the names of the manufacturer. For example, the Megafon MR100-3 router is Huawei E5372, MR150-3 is Huawei E5573, MR150-5 is ZTE MF920.

When purchasing a device under an operator's brand, the user is usually forced to either be content with the Internet services of this operator, or unlock the modem if he wants to have a choice. Unlocking methods are very diverse; there are many nuances depending on the model, firmware version and operator. But in general they can be divided into 3 large groups.

The most popular, and often the only acceptable for an inexperienced user - unlock code. Most programs that the operator provides for managing a router or modem (this can be a web or Windows application) ask unlock code when trying to use a non-native SIM card. Sometimes unlock code You can get it for free, for example by requesting it from the operator who sold the modem. In most cases, you will have to pay money for it. Unlock codes are sold on many websites and trading platforms, including E-bay. The price is usually no more than 300 rubles, and often less. Of course, there are also scammers selling non-working codes, so it is better to try to purchase them from trusted sellers.

To purchase a code, you usually just need to specify the model and Modem IMEI, and then transfer the money to the seller. The IMEI (International Device Identifier) ​​is always listed on the modem or its packaging, and is usually also displayed by the modem management program. Unlocking with a code is good because it does not allow you to damage the modem and make it inoperative. True, the number of attempts to enter the code is limited (most often there are 10), so you should not try to enter it at random.

However, even with an unlock code, unlocking the modem is not always so easy. Sometimes modem management programs are not friendly enough and do not allow you to enter unlock code directly. In these cases, the problem can be resolved using AT commands. For a number of models, there are unlocking methods that do not require an unlock code, for example, directly modifying the modem memory cells (NVRAM) responsible for the lock. In fact, AT commands are by no means a hacking tool, but quite standard way connection between the modem and the outside world. Some of them are understood by almost any modem, but the vast majority are specific to a specific manufacturer and even to a specific firmware version. There are special programs for executing AT commands and displaying the modem response. Among the most popular are dc-unlocker, gadgetinfo.

Often operators perceive the procedure unlocking the modem as leading to loss of profit and strive to make it problematic for the user. For this reason operating system(firmware) modern models 4G modems and routers are usually very closed and provide very limited options for manipulating the device. The only way to unlock the device in such cases is to change software modem to a more “liberal” one, that is reflash the modem. Usually, to do this, it is enough to download the modem firmware program and receive a special code (flash). In the case of particularly capricious devices, non-standard drivers or even disassembling the modem may be required in order to completely reset the internal memory.

You can often hear that decoupling the modem from the operator negatively affects the operation of the modem. This opinion is only partly justified - unlock code is a safe standard procedure and cannot actually harm the device. In the case of flashing, there are some nuances. If modem unlocking is associated with rolling back the firmware to an outdated version, this can cause the appearance of any bugs or worsen the stability of operation. This is especially true for the so-called needle method, which can lead to resetting memory cells containing the modem's factory settings. The main danger of flashing is that if it is unsuccessful, you will end up with a non-working or even irreparable device. Therefore, many experienced specialists are of the opinion that if it is possible to obtain an unlock code, then unlocking with a code is preferable in most cases.

Although unlocking a router or modem often seems like a beneficial or even necessary procedure, you should always remember that many free unlocking programs and flashing modems, "free" unlock code generators contain malicious code - viruses or spyware, which can become a serious source of problems.

Good afternoon.

Under the “sign” of the MTS company is hidden the well-known company “Huawei”, which produces such USB modems.

To “unlock” the MTS router you will need special software, which can be found on the developer’s website - “Huawei” (the utility is called “ Huawei Modem»).

In addition, find another utility called “HuaweiCalculator”: you will need it later.

Download and install the specified software on your computer along with the drivers and software that are installed when you connect the modem.

• 1. Now you need to determine the “IMEI” of the modem - this is a 15-digit analogue (except that it cannot be changed). “IMEI” can be found on the service sticker on the modem itself or in the documentation included with the device.

• 2. Next, insert the “MTS” modem into the appropriate USB connector and run the downloaded “Huawei Modem” program: a window will appear asking you to enter a password to unlock.

• 3. Run the “HuaweiCalculator” utility and enter these same 15 digits in the “IMEI” line, press “CALC”, go to the “NCK” line: the specified numbers will be the modem unlock code.

In a similar way, modems from other companies are also subject to “unlocking”: Beeline, Megafon, etc.