Synchronizer king work to release the shutter. PiXeL King Nikon i-TTL Radio Synchronizer for Flashes. Extracting a folder with files to the desired directory
Pixel is mostly familiar with its synchromesh and accessories, mostly for DSLRs. The quality of the products is very high. Of personal experience I can say that Pixel syncs have been working for years without breakdowns.
Pixel Soldier TF-371 radio synchronizer
These are simple and inexpensive synchronizers that can work not only with flash but also with studio light. Compact and convenient kit. If you do not forget to turn off the synchronizers after shooting, then the batteries last for a long time. Three groups and 16 independent channels. With a range of up to 100 m, for studio shooting, this is the ideal budget-friendly kit. Also, the Pixel Soldier TF-371 radio synchronizer can be used as a remote control remote control.
Pixel Opas Radio Trigger
The main difference from Soldier is the range of up to 400 meters! This distance will be convenient when used outdoors. AA batteries (2 pcs.) Are more power-consuming, but the radio synchronizer itself is larger in size. The kit includes protective case, in which, in addition to the synchronizer, wires are placed in a separate pocket.
There are no more advantages, it may be more convenient to switch channels, which were taken out to the side panel of the synchronizer.
TTL Pixel King PRO radio synchronizer
Specifications:
- frequency: 2.4 GHz
- working distance: up to 300 meters
- synchronization up to 1/8000 s
- 16 channels (15 separate and 1 common)
- PC connector on transmitter (input) and receiver (output)
- USB port on transmitter
- 1/4 "female threaded socket for mounting on a stand or a standard tripod on the receiver
- nutrition:
- transmitter: from two AA-batteries or accumulators, 500 hours in standby mode, 100 hours in signal transmission mode;
- receiver: from two AA-batteries or accumulators, 250 hours in standby mode, 120 hours in signal transmission mode;
Impressive size and great functionality. The set includes not just a protective case, but a bag that can be attached to a belt.
The transmitter has a backlit display that reflects the flash settings. The radio sync is equipped with E-TTL and supports high-speed sync. It is convenient to shoot with a flash; when shooting in the “Av” mode, metering works very correctly.
Canon EOS 6D, 1/160 sec, F 2.8, ISO 1600, Av mode
Canon EOS 6D, 1/200 sec, F 2.8, ISO 1600, Av mode
Rarely, but sometimes overexposed frames are obtained, approximately 5-10% of the total number of frames.
Conveniently, the synchronizer is powered by AA cells; rechargeable batteries can also be used.
On the downside, probably one drawback is the need to use a receiver with a Canon Speedlite 600EX-RT flash, but this little drawback pays off in cost and range.
Pixel radio synchronizers are convenient and reliable, I think that everyone can choose the necessary kit for their tasks.
Good photos!
FS widgetReview of radio synchronizers for CANON with support for E-TTL and HSS Pixel King and Yongnuo-622c
These synchronizers are direct competitors in terms of price and features, in terms of features and price, they are probably the best synchronizers on the market in their category at the moment.
What are they remarkable for? They support almost every function that is transferred from a camera to a flash and more! This means that we can use the flash taken from the CANON camera as if it were installed on it!
Why are they better than cheaper radio synchronizers? For example, Yongnuo RF-602, Yongnuo RF-603-II, which have long become popular among amateur photographers and some professionals, could only transmit a signal to fire the flash and wake it up, as well as be used as a remote shutter release device, so little functionality over time began to annoy those who use on-camera flashes on stands (often with an umbrella or softbox), since in order to set up the flashes, you had to run up to the racks many times, lower them and adjust the pulse strength on the flashes, in addition, it was impossible to use a shutter speed faster than 1 / 160 (with other similar synchronizers no shorter than 1 / 200-1 / 250).
New synchronizers allow doing everything remotely, previously it was only available to expensive Pocket Wizard synchronizers. Without approaching the flash, we can switch it to the mode we need and adjust it directly from the camera menu, for example, switch to manual mode and set the pulse strength or automatic mode set the flash exposure compensation and calmly shoot almost without thinking about setting the flash, but simply moving it to obtain the desired cut-off image. In addition, now we can turn on the high-speed sync mode (HSS) and shoot at the fastest shutter speeds up to 1/8000 - delight for fans of open aperture during the day !!
It also looks interesting that in the new (compared to the same YN RF-602) synchronizers now use AA batteries or rechargeable batteries, and not AAA as before, this is somewhat more convenient, since the flash uses the same battery format, but the size has increased the transmitter and receiver and their weight, especially considering batteries.
We can switch the flash firing on the first curtain, on the second or with a strobe (for the Speedlite EX 580 II and not with the Pixel King), set the flash exposure compensation bracketing (this function refused to work with the Pixel King in the test), set the flash zoom to the desired angle ( manually or automatically).
Moreover, we can work with three groups of flashes, turning them on and off (with group ratios so far only YN-622 works correctly) or turning them off.
Synchronizers have autofocus illumination! Now you can safely focus in complete darkness in the studio and outdoors. Synchronizers have the ability to make a test impulse, for this you must press CH SET and GP SET simultaneously on the Pixel King (all flashes will fire) or on the test button on the YN-622.
Since significant differences have emerged, let's continue further on what is different about them:
The Pixel King looks pretty decent and the build seems to be of higher quality than the YN-622, when you look at it, which suggests that their designer was on vacation during creation. this device, the glossy surface of the YN-622 case on top is instantly scratched - on the Pixel King case, they do not save so hard.
Further, very convenient function The "through shoe" that allows attaching the flash to the synchronizer transmitter works only with the YN-622, with the Pixel King it is apparently intended for other purposes (there is even a plastic cover for the "shoe" socket in the kit). Also, Pixel King does not shine with the strobe mode (present in the 580EX II), it simply cannot be set in the camera settings, unlike the YN-622.
The Pixel King package is very good, the transmitter and receiver themselves, two cables for studio flash and USB wire, straps, a stand similar to the stand from a Canon flash, a cap, an instruction and a chic case with a belt clip for this whole household. The YN-622, in addition to two transceivers (I must say, the transceiver is a somewhat more convenient solution than a separate transmitter and receiver in case one device out of several) comes with only instructions, it's a pity that the YN-622 is not equipped with an adapter for studio flashes, however, the connector on both synchronizers is standard and the cord that comes with the studio flash unit should fit.
Perhaps it will seem important to someone that the real "range" of the Pixel King is about 150 meters (up to 100 meters claimed), as opposed to 50 meters for the YN-622 (at least in my test it turned out that way, I measured it using google maps). Why is this (150 meters) operating range needed? For example, when shooting with a super telephoto camera or with indirect visibility to the receiver.
Less significant is the fact that the AF illumination differs in the shape of the beam, the Pixel King has a spot similar to a spot from a portable flashlight, while the Yongnuo-622 has a set of dashes in two planes occupying a smaller area, in both cases all the camera's autofocus points will not be covered with such illumination. It should be noted that synchronizers from both companies can be used to illuminate the central AF point if you want to shoot with a lack of light without a flash (the flash can be simply annoying in size and weight when you don't use it, but you can't remove it from the camera because you want the autofocus illumination).
The Yongnuo-622 lacks the ability to update the firmware and power the synchronizer from an external power source, but the Pixel King has a mini-USB connector.
The Pixel King receiver has a plastic hot shoe connector, which is not at all great, given the usual mounts on racks with umbrellas or softboxes, although in the center there is a metal bushing with a threaded tripod screw, while the Pixel King transmitter has a metal hot shoe connector.
Yongnuo-622 is without such oddities, both devices have a metal connector (the devices are basically identical). What's nice is the Pixel King and Yongnuo-622 on the hot shoe have plastic wing-clips for fixing in the socket.
Additional notes on these synchronizers:
Not all Canon DSLRs and flash units support the described functions of these radio synchronizers!
The cameras listed below support flash control functions from the camera menu and will work with these synchronizers.
1D Mark III, 1D Mark IV, 1Ds Mark III
5D Mark II, 5D Mark III
7D
40D, 50D, 60D
450D, 500D, 550D, 600D, 650D
1000D, 1100D
Flash units that support control from the camera menu and will work normally with "our" synchronizers -
Yongnuo YN-568EX, YN-565EX, YN468, YN468-II, YN467, YN467-II, YN465
Canon 600EX, 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II
But what about the older flares 580EX I, 430EX I, of which the people have accumulated an incredible amount? The TTL mode will work (it will still work, without running around), exposure compensation, exposure compensation bracketing (only for YN-622), HSS (which pleases), as well as turning off the flash (the flashes are turned off, and the autofocus illumination on the transmitter will work ), well, group management will also not go anywhere (at least disconnect, connect the group).
The Pixel King and Yongnuo-622 package does not include an adapter for remote control functions, it must be purchased separately.
Conclusions and distinguishing features in brief:
Pixel King and Yongnuo-622 are long-awaited devices by many photographers that allow you to fire studio flashes, remotely trigger the shutter release, and also comfortably shoot using groups of on-camera flash units at a considerable distance, without having to approach and adjust them every time you change their position. transfer of HSS functions (and on special studio flashes too) and the ability to shoot at shutter speeds up to 1/8000, as well as autofocus illumination, and all this for reasonable money.
Pixel King radio synchronizers look better, have a "range" 3 times greater than the Yongnuo-622, are regularly re-asked (which gives some hope for improving the functionality), have a rich package and a threaded hole on the receiver for attaching to a tripod or stand.
Yongnuo-622 radio synchronizers support the functions of "through shoe", exposure compensation bracketing, stroboscope, it works correctly with group ratios, both devices in the set have a metal connector on a "hot shoe" and are a transceiver.
You can buy synchronizers from our online store:
Yongnuo-622 Canon
Review prepared by: Alexander Kuzin
Dear strobists! I am posting a fresh review-test of the Pixel King radio synchronizer for Nikon (thanks to Andrey Revun from Ternopil), who provided tests for the D300s + SB900 + King combination.
In general, King exceeded expectations - it works 1 / 8000s on studio and on-camera light, works through TLL on the transmitter hot shoe, TTL support on flashes, EV correction, etc. Below is a quote from the article, full blog post
P.S. If you want to ask a question to be answered by the author of the test - ask it on the blog.
Build quality and design
The first impression when you open the box is - Oh, it really looks like good appliances!
Indeed, it comes with a trustworthy transmitter and receiver. True, the "boxes" are rather large, but it is pleasant to take them in hand and immediately want to put them on the camera.
Ergonomic design, convenient arrangement of controls. A trifle (but nice!), Which immediately caught my eye - the Off / On lever. When you put the synchronizers into the case, the power button will always tend to the Off side, that is, even if you touch it in some way, there will be no such annoyance when the power switch is miraculously in the On position and the batteries are at zero. I was glad that we took this into account)))
Very good design of the case, everything is precisely docked, LEDs are tightly inscribed, a very good power-on slider (it does not dangle and is not too soft to switch spontaneously), pleasant channel and group selection buttons.
Everything is made of durable plastic, it is not scary to put on a flash on the receiver, and this structure on a stand, pull it out over the “abyss”, is a very reliable mount.
By the way, another useful little thing: there is a spring-loaded pin (pin) in the mount of the receiver and transmitter, so the reliability of the mount to the holder is at a decent level!
The frequency of the synchronizer is 2.4 GHz. The range is even slightly larger than the declared 100 m. But the range of operation most likely depends on the environment (you need to take into account the specifics of radio and electromagnetic interference).
I was also very pleased with the fact that the power is supplied from conventional 1.5V AA batteries (2 pcs AA), because CR-2 batteries are not particularly invigorating for the price and lifespan
Is there some more uSB port, for the possibility of changing the firmware, but has not yet connected it to the computer - there is no need.
In general, I really enjoyed it. But there are some and "But"
How to turn on the Pixel King Nikon radio synchronizer
Now I am writing specifically about MY bundle D300s + SB-900 + Pixel King for Nikon.
It is very important to connect everything in sequence, because my first connection upset me greatly. In the off state, you need to fasten everything to the camera and flashes, turn on the power on the receivers, turn on the power on the transmitter, then turn on the flashes, then the camera, then the expected TTL (TTL FP))))
If the order is incorrect, the circuit elements are poorly recognized - the flash does not appear in TTL (TTL FP) mode, but the indication of operating mode A simply glows, therefore its operation is absolutely inadequate (either the camera or the flash is detected incorrectly, it is not clear ...).
-
Overview. Pixel King Radio Trigger for Canon
Pixel manufactures a range of radio syncs and controllers for Canon cameras.
Radio Trigger for Canon Pixel King E-TTL, which will be discussed in this review, is designed to control remote flashes through the Canon camera menu using a radio link.
In 2007 with the release of the EOS 1D Mk III and 40D digital cameras, Canon introduced the FCM (Flash Control Menus) camera menu control system. Radio Synchronizer King has all the benefits of radio with FCM and Canon Mark II Speedlites.
AT this review the kit released in August 2011 is being tested. Further updates by the Pixel manufacturer are not ruled out.Also participating in the test are: 50D, one 580EXII, three 550EX and two 430EXII.
Content of the Pixel King radio sync review:
Pixel King Features
Pixel King radio sync package
Subject Description Pixel case Lasting; also accommodates a mini stand and instructions King transmitter (TX) King receiver (RX) Secured separate compartment with safety strap Connecting cord (PC-1/4) Cord with PC connector 6.5 mm ("big jack") Connecting cord (PC-3.5) Cord from PC connector to 3.5 mm ("small jack") USB 2.0 cable Connector A male to Mini B male, length 1.5m. Receiver cover Plastic plug for receiver hot shoe when used via PC cord Mini stand Pixel Universal Stand with wide base and ¼ ”threaded hole for stand mounting. Instructions for using King Version V10.01 External interfaces
Location Subject Function From above Logo “Pixel King ETTL Flash Trigger” with “Transmitter” or “Receiver”. Hot shoe The transmitter does not have a flash on the hot shoe - only for optional accessories Pixel, RX: full E-TTL radio support 3 Indicators Channel setup - L1, L2, L3 3 Indicators Group setting - A, B, C Indicator Link indicator In front AF backlight TX: Red AF illuminator, RX: White illuminator Behind Indicator Link indicator "Ushko" To attach a safety lanyard Left Button Channel selection PC connector TX: no assignment yet, RX: PC output Mini-USB connector To update softwareThe receiver supports radio function (with optional lanyard) On right Button Group selection Switch Turn on / off the radio synchronizer From below Hot or cold shoe TX: Hot shoe with pull-down ring to attach to camera - only way to attach Pixel King transmitter, RX: Cold shoe with convenient pull-down ring and 1/4 thread for attaching to the stand Cap Battery compartment Dimensions of the radio synchronizer
Wireless system
Control channels
You can set the channel on the transmitter, or through the camera menu.
The following combinations are available:CH button L1 L2 L3 L2 L3 L1 L2 L1 L3 L1 L2 L3 Each receiver can be set to 1 channel. Accordingly, only those receivers whose channel corresponds to the channel on the TX transmitter or to the channel set through the camera menu will work. Any channel indicators on the flash LCD are ignored.
Receiver shoe voltage
According to the manufacturer's information, the voltage at the receiver's shoe is 60 Volts, i.e. it is not compatible with higher voltage flashes (so-called high voltage flashes)
EOS Canon Camera Compatibility
Flash Compatibility
Control Functions Manufacturer Camera models Via camera menu (FCM) E-TTL, exposure compensation, HSS sync, curtain sync, channels, groups, zoom, ETTL mode, sync speed 1 / 8000s Canon 580EX II, 430EX II, 270EX Third Party Manufacturers Metz AF-48, 50, 56 Camera buttons Exposure compensation, HSS high-speed sync, manual mode M Canon 580EX, 430EX (550EX not yet compatible) Third Party Manufacturers Yongnuo YN-565EX, without HSS Flash buttons Manual control Various on-camera; budget studio Synchronization speed up to 1/250 s) Original studio flashes Synchronization speed up to 1 / 8000s, limited only by the capabilities of the camera or flash Build quality and design
The sleek body of the radio synchronizer is designed with excellent ergonomics - all controls are easily accessible (including the on / off button!), Indicators are visible from a distance. The product is made with great attention to detail and allows the photographer to quickly change the desired settings.
Some design innovations - external power supply, use of NiZn batteries; more secure attachment of the receiver leg. The following problematic points have also been fixed - the battery compartment cover now closes more securely, the receiver's leg now has a large diameter ring with cutouts for nails (taking care of the ladies :)), as well as a thread for mounting on a 1/4 inch tripod.Flash power control
Camera menu control
Most functions Pixel King for Canon based on Canon camera menu control system. It requires a 1D Mk III, 40D, or later camera, and a Mark II Speedlite. Menu functions vary depending on the camera model.
Notably, Pixel King changes some menu items, disabling some and keeping others.
For example, this is how the radio synchronizer works with the Canon 50DFor convenience, add the “Flash Control” menu item to your Custom Menu and set it to open first.
ETTL with FEC flash exposure compensation
Automatically adjustable pulse power
This mode is available when using the EOS camera with EX Speedlites (not yet 550EX) mounted to the RX receiver shoe in slave mode.
Flash can be grouped into one group (A + B + C) or A: B or A: B, C is not supported. FEC can be applied by pressing the FEC button on the camera, across the screen quick settings or the camera control menu. Simultaneous multiple flash control availableRemote control in manual mode
This Pixel King mode is available for SLR cameras with Mark II flash on the RX receiver shoe. Flash units can operate in one group (A + B + C), in two or three, each group with its own power level. The power level ranges from 1/1 to 1/128 for each of the three flash groups and is set via the camera menu. Individual groups can be activated or deactivated using the GP button on the TX Pixel King transmitter.
Manual flash mode
Power level control directly on the flash.
Assumes use of an EOS digital camera with flash in manual mode... You need to connect the flash to the RX radio receiver using a PC-sync cable. In this case, Pixel King provides a simple trigger function.
The second method is an EOS camera and the EX Speedlite is mounted on the hot shoe of the RX receiver, but set to M manual mode after being detected by the receiver.Mixed mode ETTL / Manual
Flash power control in mixed ETTL mode and manual
Canon camera menu control allows you to use either E-TTL or M mode, but not at the same time.
However, you can use E-TTL and manual flash directly. The trick is to use E-TTL directly to capture the subject, and flash with manual setting for background, hair, etc. ETTL will pre-meter the exposure and then all the flashes will fire at the same time.Shutter sync modes
First curtain sync
First curtain sync is available in both E-TTL mode and manual mode. It includes simple synchronized firing of manually set flash units.
Second curtain sync
Second curtain sync (rear curtain) works in E-TTL (groups A + B + C) or manual mode.
High speed sync (HSS)
High speed sync up to 1 / 8000s is available if supported by the camera and lighting equipment. This is the standard sync mode.
Radio Trigger for Canon switches between normal speed at slow shutter speeds and HSS at shorter ones. Work on full power flash is allowed only for more low speeds... The optimized HSS is 1.5 stops slower. If the shutter is set to high speed and first-curtain sync is enabled, the shutter will be forced to switch to normal flash sync.Hypersync
Pixel cannot use this term (as it is a registered trademark with PocketWizard), but it is nevertheless an optimized "hypersync" feature that works for most on-camera flashes and studio flashes. Pixel King can ignite studio flashes that support 1/8000 sync speed using the PC-sync connector.
Multi Mode (Stroboscopic Mode)
Multi stroboscopic mode is not available.
Other camera functions
Flash Exposure Lock (FE Lock)
The Pixel King radio sync fully supports Canon AE lock. When you press the FEL button on the TX transmitter, the blue LED will flash every second for 16 seconds.
Auto-Focus Assist Support
The TX transmitter has a white autofocus that glows when the shutter release button is pressed. This is not a genuine Canon feature and may be overly bright in low light conditions.
Flash autofocus also works when this is set on the camera.Remote camera release
RX receivers can be connected to the camera jack with a special USB Mini B to E3 or N3 cable (optional).
Canon E-TTL Wireless Sync
This function is not supported, including Master / Slave and E-TTL. "IR", popular but
Incorrect term for Canon Wireless Control Light is not used. However, the wireless control mode needs to be activated in the camera menu to be able to access some of the manual settings.
Warning - If "Main Flash" was previously set to "Disabled", Pixel King will not turn on.Modeling light
The modeling light function is not available.
Bracketing (FEB)
Bracketing is not available.
Wake up function
The transmitter of the TX radio also goes into power-saving sleep mode when the camera goes into sleep mode, but it wakes up almost after half-pressing the shutter button or FEL button.
Other flash functions
LCD indicators
Flash zoom, focal length, ISO, shutter speed, FE Lock and HSS - all indicators change instantly in real time, either when changed in the camera or when you half-press the shutter button
Pilot test indicator
Any flash unit can be test-fired using the Test button.
Zoom setting
The camera control menu will set the zoom reading automatically to the same value - be it automatic or manual. If the flash head is set to the failure position, camera control will be disabled and any flash zoom settings will be retained.
Other Pixel King Features
Information indicator
The TX transmitter emits a short red beep on power up / initialization, and blue on data transmission. There is no signal for the "standby" or "sleep" state.
The receiver of the radio synchronizer RX gives a short red signal when turned on and blue when receiving data. In standby mode, it flashes at 2Hz. After contact with the camera, the blue signal disappears and then within 30 seconds the processor is ready to receive data in operating mode.Using a flash meter
It is possible to ignite all flash units in test mode, regardless of the group, by simultaneously pressing the CH and GP buttons on the transmitter.
External power supply
The battery compartment on the transmitter is very accessible, unlike the receiver. A USB battery pack can be used (See 9. Problems below.).
Updating software
Software (firmware) updates for Pixel King are available through their website:
http://pixelhk.com/down/king/
You will also need a "RAR" archiver to unpack the archive.Selecting and downloading the required archives
The following firmwares are currently available for Canon kits
Read the instructions for updating the firmware
You can view the update instructions using the button in the lower right corner of the updater.
Extracting a folder with files to the desired directory
Unpack rAR file using the latest rarLab, WinZip, etc. for your OS. It contains a folder with 3 files - * .bin, Pixel Upgrade Tool.exe and wtf.fir
Attach the Pixel King Receiver or Transmitter
Select the appropriate radio synchronizer device to update, turn it off and disconnect its shoe.
Connect King to your computer using the supplied USB 2.0 cable (suspicious quality) or come in handy from a Canon USB cable (good quality).
The updater should pick up the device, and the transmitter's autofocus illumination will light up (the other 7 indicators should be off).Update launch
Make sure the updater shows the version you want firmware and click the "Upgrade" button. Turn off the radio synchronizer, disconnect it from the computer.
Conclusions about the Pixel King radio syncronizer for Canon
Support for camera menu control is a big breakthrough in the on-camera flash industry, and Pixel has done an impressive job of integrating remote flash communication over the air.
Pixel has achieved things in King radio syncs like -
Flash sync
E-TTL transmission and start one group
Remote manual control and triggering from one to three groups
Synchronization of modern studio flashesPixel King - quite a serious product aimed at a wide audience of photographers who do not want to sacrifice in dynamic shooting conditions automatic tuning power, hss and control through the camera menu.
Considering the positive feedback (see bottom of the page) from Pixel King users, this is another contender for PocektWizard - let's see how long it can keep up with Canon's top TTL radio synchronizers among Chinese manufacturers.
Pixel King Radio Synchronizer Manual for Canon
Pixel King manual at PDF format in Russian with a detailed explanation of the operation and functions of the radio synchronizer can be downloaded from this link.
Pixel King E-TTL Radio Synchronizer Video Review for CanonThe Pixel King PRO Professional Syncronizer for Nikon is the third generation of Pixel's TTL radio syncronizers. It can work with both on-camera flash units in TTL / i-TTL or manual mode, and with studio flash units. The Pixel King PRO Transmitter for Nikon has a hot shoe heel with a pressure ring for attaching the transmitter to the camera, and a mini-USB port for firmware updates or power connections. The LCD display allows you to visually monitor all current settings and quickly readjust the synchronizer. The Pixel King PRO radio trigger can simultaneously control one, two or three groups of flash units in TTL or manual mode, while the power, exposure compensation and zoom can be adjusted separately for each group. Supports flash control via camera menus. The choice of working channels and the distribution of flashes into groups is carried out by buttons, each of which has a light indicator.
The Pixel King PRO synchronizer receiver has the following interfaces: a mini-USB port for firmware updates and power supply (5 V), a 3.5 mm PC-out port for connecting an off-camera flash or studio flash, a hot shoe for mounting on a camera flash receiver. The receiver has a standard tripod thread on the bottom. Using a retaining ring, the receiver can be mounted on a flash stand or studio holder.
The advantage for photographers is the Pixel King PRO's full TTL compatibility with receivers previous generation Pixel King Nikon.Specifications:
Radius of action - 300 m
Number of channels - 16
Signal frequency - 2.4 MHz
Supports FP HSS high-speed sync - up to 1/8000 sec
The ability to control and change the flash parameters via the transmitter menu,
Possibility of simultaneous use and control of flashes in different modes - iTTL, manual (Manual),
Possibility of making correction (FEC) +/- EV of power ratio in groups A: B and A: B C,
Possibility to set individual values \u200b\u200bof the position of the light head (zoom) for each group,
Set FEC compensation values \u200b\u200bin +/- 5 steps,
Transmitter pass-through hot shoe,
Supports flash firing by second curtain shutter,
FEL support,
The ability to flash the internal software. The presence of a USB port, work both in Windows and Mac,
Pixel King Pro transmitter can be either a receiver or a transmitter - a transceiver,
Support remote shutter function.Currently, we can confidently say that the Pixel King Pro radio synchronizer for Nikon is fully compatible with such flashes as Nikon SB-900, SB-910, SB-800, Metz 44AF-1 / N, Metz 50AF-1 / N, Metz 52AF-1 / N, Metz 58AF-2 / N, Oloong 551EX, Oloong SP-690 (limited), Oloong SP-690II (limited), Yongnuo YN-468 II for Nikon (limited), Yongnuo YN-467 II for Nikon (limited) ...
Equipment:
Radio synchronizer - 1 pc.
