Htc one s does not find wifi. Wi-Fi does not turn on on Android: possible failures and methods for eliminating them. Installing the wrong firmware

Let's look at how to make HTC Android smartphone series One, Desire and other wireless access point (Wi-Fi router, hotspot). This function allows you to “distribute” mobile Internet from the device to several devices connected to it via a wireless network

• Laptops, tablets or other phones.

  How to find a Wi-Fi router in HTC: brief instructions

  1. Go to Settings > Wireless & networks and click More.
  2. Click General access To Mobile Internet> Router settings.

  

  And now more details.

  Enable wireless hotspot in HTC: first option

  If your smartphone was released in 2013 or later, follow these instructions.

  While on the home screen or in any program, open the notification panel (pull the top curtain down).

  

  The settings menu will open. Click Advanced. Select Internet Sharing > Router Settings. Besides Wi-Fi networks in this menu you can configure the connection to general Internet via USB or Bluetooth.

  

  Specify the connection name and select the wireless network security protocol (we recommend WPA2 with AES encryption algorithm). Enter the key (password) for connection (you will need to enter it on devices connected to the network).

  

  

  To enable the access point, check the “Wi-Fi router” checkbox.

  Your wireless network is now configured, active, and ready for other devices to connect to.

  Enable Wi-Fi router in HTC: second option

  For HTC smartphones With older versions of Sense the following steps are required.

  Go to your phone's settings menu. In chapter " Wireless connections and networks" click "More...".

  

  Select the “USB modem/access point” menu item.

  

Reading time: 4 minutes

Wi-Fi module in a tablet or phone on operating system Android is one of the most important components today. Wireless networks surround not only homes, but also at work, in your favorite coffee shops and even in public transport. Wi-Fi on Android usually doesn't turn on at the most inopportune times. Why might this happen? There are several options:

• the password is entered incorrectly;
• the network connection or system settings are lost;
• there was a failure in the operating system;
• the wrong firmware was installed;
• The Wi-Fi module itself has failed.

Most often the problem turns out to be in the settings. Of course, if a smartphone falls into water, there is a possibility that something is wrong with the module. But if nothing happened, and the network suddenly disappeared, the error is most likely a software one.

If Wi-Fi on Android does not start, first of all you should:

Often the reason for Wi-Fi not working is very simple. But it doesn’t always involve an incorrect password or the wrong time. If after all the steps the Wi-Fi icon is still gray, it’s time to move on to something more decisive.

Restoring settings

The most simple solutions to restore Wi-Fi consists of setting the correct date and time. If airplane mode is not active and the date and time are correct, you can try resetting the device to factory settings. Having previously saved the data in cloud storage or on another device.

Android users have encountered the problem of forever loading when trying to update or install apps via Play Market. This also affected the performance of the network. If this is your case, try clearing the Play Market cache and deleting temporary files.

Router settings

You come into additional settings and you get the error " mac address unavailable"? Turn off Wi-Fi on the device, as well as the router itself. After a while, connect back and try to access the network again. If this does not help, the encryption settings on the router itself may have been changed. Some Android devices simply do not see the channels encryption higher than 11. Change the router settings and connect again.

Android engineering menu settings

If your device is powered by a MediaTek processor (most Qualcomm-based devices do not have this option), you can access engineering menu and expose Wi-Fi settings right through it. You can open it using the command “*#*#3646633#*#*” entered in the dial pad. For some tablets that do not have this panel, you can install special utilities to enter engineering mode. The settings are checked and set in the "connection" tab.

Setting up something through the engineering mode is only worth it if you are an advanced user Android platforms. This is a mode for developers; any changes at random can lead to unpleasant consequences.

Wi-Fi settings on Android TV-box

The TV Box, which also runs on Android, like smartphones and tablets, is also not without connection problems. To work with it, it is recommended to use an external Wi-Fi adapter or connect a cable, but this will only improve the speed. And if Wi-Fi connections no at all, it is recommended:

1. Go to the file manager.
2. Find the WIFI folder and the wpa_supplicant.conf file in it.
3. Delete a file.
4. Wait a while and start searching for Wi-Fi on the set-top box.
5. The device will automatically find a connection.

Did not help? Time to check the software.

Software glitches

Wi-Fi may not work or randomly disconnect due to recently installed applications. Go to Application Manager on mobile device and see which one gets the most activity during departure. Such an application usually also mercilessly eats up the battery, so the smartphone or tablet “dies” faster. It will be enough to delete the application or install another version with which the error was not observed.

It is recommended to check whether you have any applications that restrict Internet access. So you can set restrictions through a number of firewalls even without root rights. There are also special utilities for checking software, thanks to which you can see which application is causing the network to generate an error. Additionally, it is recommended to check your device for viruses - some of them may create problems with network connection via Wi-Fi.

Installing the wrong firmware

Cause of problems with work Wi-Fi module may be in custom firmware that blocks the connection. Manufacturers recommend installing only official versions firmware: custom options are not always reliable. If problems arise after flashing, you should roll back the device to factory default or flash it again. Only now on the official one.

Last fall I bought myself a beautiful phone. Everything was great, but a problem arose: he refused to connect to his home wi-fi... Moreover, at home, at work and in Minsk the Internet was connected without problems.
The essence of the problem was this: I log into the HTC Wildfire S phone settings - wireless network- Wi-Fi settings - turn on Wi-Fi. The phone finds my network, I select it, enter the password. “Connecting to my network” is displayed after “Obtaining an IP address on behalf of my network” and at this moment it immediately turns off and does not connect to this network anymore. It becomes "out of range, stored in memory."
I tried to find a solution to this problem on the Internet, I tried everything using the phone settings, but nothing helped. I didn’t want to believe that there was something wrong with my newly purchased phone :) So I read somewhere that this was probably a problem with some modem settings and settled on the idea that it would be necessary somehow reset all modem settings and configure them again... So six months have passed... :)
Last week, relatives came to visit and Denis, my cousin, took me to look at the phone. I asked how it works, I described this problem to him... And he immediately told me “Your diashsypi is not configured” and fixed everything in 5 minutes!
So, solution: enable the DHCP server in the modem settings.
For this purpose in address bar enter http://192.168.1.1/ from any browser, specify the login and password for the modem. And look for the treasured DHCP letters in the modem settings.
I currently have the following DHCP server settings on my modems:



After enabling DHCP, my HTC Wildfire S immediately connected to the Wi-Fi access point!

P.S. DHCP- this is such a setting (or rather network protocol this), with the help of which devices that want to work on the network can automatically obtain certain settings, including IP addresses.

P.P.S. Additions and corrections are welcome! =)