home » Amount in excel » How to connect a stereo system to a TV? A great way to improve the sound of your TV is to connect a music center How to set up a music center

How to connect a stereo system to a TV? A great way to improve the sound of your TV is to connect a music center How to set up a music center

Music centers became widely available in the early 1990s. These were powerful sound machines with a radio, cassette deck and CD drives. Despite the fact that cassettes are no longer available for sale, and CDs are rapidly going out of fashion, music Center is not outdated even today: a high-quality amplifier with speakers can easily sound both a formal evening and a crazy party. How to properly connect a music center to a computer, TV or laptop?

What is a music center

As a rule, a music center is understood as a device combined in one housing for reproducing sound from different sources, as well as an amplifier. Cassette decks and CD drives are a thing of the past, but power amplifiers and speakers continue to improve. Large speakers, which are equipped with music centers today, operate in the power range from 90 to 150 W and satisfy the requirements of the most demanding music lover. Significantly expanded frequency range emitters, their acoustic characteristics have reached perfection. That is why many people try to connect other home equipment to the music center - a TV, a computer, a DVD player.

The old centers, released 10–20 years ago, were not left out either. It’s easy to connect a tablet, phone or laptop to the music center via standard AUX, line-in or microphone input connectors. Your favorite music will sound in your apartment, office or country house. Switching, as a rule, does not amount to big problem. You just need to be careful and follow simple safety rules. Let's look at the most commonly used methods of connecting to a music center.

How to output computer sound from a laptop

Most “computer” speakers are no different high quality sound, and the laptop’s built-in tweeters are designed to reproduce system sounds. To enjoy a movie, enjoy your favorite songs or multimedia presentation, it is better to output the signal sound card to the music center.

To connect a computer to a music center, you will need a special cable, at one end of which a 3.5 mm Jack connector is installed, and at the other end there are two RCA (“tulip”) connectors, usually white and red. The connection principle is that the linear input of the music center is connected to the linear output of the computer sound card. To do this, a 3.5 mm Jack plug is inserted into a socket on the computer (usually green), and two tulip connectors are inserted into the corresponding sockets on the body of the music center. In most devices, the linear input needs to be activated - turn on LINE-IN or AUX mode, check according to the instructions of the center.

If the music center does not have a linear RCA input, a cable with two identical 3.5 mm Jack connectors at the ends will help connect it to the computer. This wire connects the output of the sound card of a computer or laptop to the Jack socket on the front panel of the music center, labeled AUX or IN. When making connections, it is recommended to turn off both devices.

Both the main and auxiliary line inputs must be activated for audio to be sent to the amplifier. Check the instructions for your center.

Video: connecting an audio system to a computer

How to boost TV sound

For ten years now, the main federal channels have been broadcasting in stereophonic mode. To make your favorite series sound brighter, it is recommended to connect a TV to the music center. Depending on the TV receiver model, you will need an RCA-RCA, RCA-Jack or Jack-Jack cable. To connect the TV to the music center you must:

Turn off the TV and stereo.
Find the AUDIO-IN connectors on the TV and select an adapter.
Connect the cable at one end to the TV.
Plug RCA “tulips” into the stereo.
Carefully lay the cable.
Turn on the devices.
Activate center line input.
Check for sound.

Most TV models have RCA line outputs labeled AUDIO-OUT. If no such connectors are found, sound can be output through the headphone port - the Jack jack is often located on the front panel of the TV. Please note that the sound volume in this case will depend on the setting of the control on the TV.

How to listen to music from a smartphone on a music center

Music recorded in a smartphone will sound in its entirety if the signal is output to the speakers of a music center.

Traditional wired phone connection

Absolutely all phones have only one sound output - to headphones. To connect devices, you need a Jack-RCA cord. A single 3.5 mm Jack plug is inserted into the socket on the phone. And two RCA “tulips” at the other end of the cord are connected to the linear input of the music center. When you turn it on for the first time, it is recommended to reduce the sound level to a minimum.

Modern alternatives: wireless connection via Bluetooth or Wi-Fi

In some new generation stereo systems, the telephone connection is carried out using wireless connection, it can be Bluetooth or Wi-Fi. Some models are equipped with a telephone jack on the dashboard. The smartphone plays music and charges at the same time. The center together with it can work as an alarm clock.

Unfortunately, stereo systems with such a connector depend on the phone model - you won’t be able to connect an Android phone to an iPhone device. And only manufacturers producing non-standard devices should be blamed for this. Detailed description The capabilities of the center are given in the operating manual.

Video: phone and music center

Connecting an electric guitar

Any guitar must be connected through a special amplifier; musicians call it a “combo”. Without it, the sound will be terrible - buy a guitar amplifier so as not to torture yourself or those around you.

If a courier with an amplifier is stuck in a traffic jam, but you really want to try out the new Stratocaster, it is possible to connect the guitar to the music center. To do this you should:

Take an adapter from a large jack (6.35 mm) to RCA tulips.
Insert a large jack into the guitar's pickup.
Insert both “tulips” into the linear input of the center so as not to think about which column is correct.
Turn the center volume down to minimum.
Activate the center line input if necessary.
Play a chord while raising the volume.

The guitar is a monophonic instrument, so the sound will only come from one speaker.

How to make an MP3 player play through speakers

The portable MP3 player connects to the music center via the headphone output. To do this, you will need an adapter from 3.5 mm Jack to RCA connectors. In addition, you can send a signal to the microphone input by connecting it to the audio output from the player.

Is it possible to put a stereo system in a car?

Those who spend a lot of time driving a car tend to equip their car with a good audio system. There is no better travel companion than your favorite music. It is quite possible to use a music center for this purpose. The only obstacle is the lack of 220 V alternating voltage, from which the audio center usually operates. For modern electronics there are no barriers that cannot be overcome.

Attention! Using non-standard equipment in a vehicle can be dangerous. Securely secure the case and never operate the audio system while moving.

There are converters on sale that provide a transition from 12 volts to 220. The only thing to remember when using such a transformer to power the center is that when the engine is turned off, rapid discharge occurs battery. As practice has shown, it is best to use the audio system while driving, when engine and generator speeds exceed 2000 per minute.

How to install a subwoofer in a stereo system

Subwoofer - a special speaker that produces low-frequency sound waves in the range from 20 to 120 Hz. This acoustic device is often used in cars, it serves to reproduce low bass. Since there is no stereo effect at low frequencies, the sound is not localized, but this creates a unique sound atmosphere.

If you want to upgrade your music center and connect a subwoofer to it, you need to read the center’s operating manual. Audio systems often have a special output, designated SUB. If there is no such output, the subwoofer can be connected to any line output. The circuit inside the device will itself “select” the sounds of those frequencies that it is intended to reproduce.

Active or passive subwoofer

The active subwoofer is equipped with its own amplifier; it is connected to the linear output of the center. You can set the operating frequencies and volume on the device body. If the subwoofer is passive, then it is connected to the gap between the center output and the standard speakers. The passive version is not equipped with an amplifier and is quite sensitive to the location in the room. It should not be placed in corners or niches, as this will make the sound extremely booming.

Connecting a flash drive

Modern new generation music centers, without exception, are equipped with a USB port. Through it you can listen to audio recordings saved on storage devices such as flash drives.

If the center is not the newest and does not have a USB port, a regular car FM modulator or transmitter will help you get out of the situation. This requires a small transformer electric current, which converts a voltage of 220 W to 12 W. It is usually designed in the form of a car cigarette lighter. An FM transmitter with a USB input is connected to it. The tuner display shows the frequency at which the modulator transmits the converted signal.

Another option that will help combine new technologies with the center, without a USB input, is to connect it to the computer via the “AUX IN” output, as described above. Each computer has several flash drive slots that can be used to play sound signal. The playback quality with this connection will be significantly higher than when connecting a car FM modulator.

Video: how to connect an FM modulator

Connecting color and light music

A good addition to a music center is a color music device. Accompanying the soundtrack with flickering lamps of different colors creates a beautiful halo and an indescribable atmosphere. In order to connect a color and music installation to the center, you need to use an adapter cord equipped with an RSA or DIN standard plug. If a connection to the line output is not available, you can modify the cord by creating a parallel connection to one of the channels.

Another way to connect light and music is to connect directly to the speakers using alligator clips. This method is possible if the cables running from the center to the speakers are located in an accessible place. Otherwise you will have to resort to soldering.

There are also color music installations equipped with a built-in microphone that “listens” to the music and transmits its vibrations to the lamps. This installation does not need to be connected; it is enough to place it directly from the sound source and plug it into a power outlet.

Connecting a wired and wireless microphone

Many audio systems are equipped with a karaoke function. In order to use it, you need to connect a microphone to the center. This is done very simply: insert one end of the cord into the socket marked with the MIC symbol or microphone icon.

Wireless microphone amplifier

There are also wireless models microphones that give the performer greater freedom of movement. To connect to the same socket you need to plug line output receiving module, and insert the power supply elements - batteries or accumulator - into the microphone itself.

The range of such a microphone can reach from 10 to 50 meters.

Connecting a vinyl record player

It may seem strange, but today a trend has been revived - recording musical works on vinyl discs. Players of “giant” records began to appear on sale, operating on the basis of digital reproduction of analogue sound recordings.

New generation digital players are compatible with all modern audio systems and computer equipment. Such a player can easily be connected to a music center via a linear input.

Connecting old record players to modern equipment is often technically difficult. To do this, it is necessary to solder the connectors of the connecting cords, and the music center must have a line input function.

Connecting a mixer

Among other things, the music center is capable of working with a mixer. This allows you to customize the sound to suit your playback needs. For example, when combining guitar playing with singing, it is necessary to regulate the strength of one or another sound stream.

To make this possible, a microphone and a connector from the instrument are connected to the mixing console. Then the mixer is connected to the music center via the line input.

Depending on the model of the mixer and other audio equipment, the connection is made with various connecting cables, a description of which is given in the technical documentation.

Video: how to connect a mixer

Additional antenna for music center

One of weak points The first generation of music centers had antennas with low sensitivity. This was due to the fact that not every outback of our vast Motherland had a stable FM signal. Using trial and error, craftsmen found ways to improve signal reception and invented Various types antennas In practice, a good result is obtained by a simple copper conductor up to 5 m long. One end of such a cable is stripped and connected to the socket of a standard antenna, the other is laid along the wall.

Another proven option is to make your own copper frame with a side of 60–70 cm. By experimenting, you can find the optimal place to place such an antenna.

There are also ready-made antennas produced by industry - they can be bought in the store.

When connecting various acoustic devices to the music center, you must remember to follow the rules of personal safety. The main recommendation when connecting cables is to completely disconnect the devices from external power sources.

There are many models of TVs and music centers on the market from different companies: LG, Samsung, Sony, Philips and others. This technique allows you to enjoy watching your favorite movies and listening to tunes. Sometimes there is a need to improve sound quality. In such cases, a question arises related to how you can connect the music center to the TV. This article will discuss options for connecting these devices.

Description of the connection process

Before connecting, you need to read the instructions for both the TV and the stereo. To connect equipment you will need a suitable cable. All pairing steps are very simple and will not be difficult to complete.

Important! The first thing you need to do is carefully study the technique. In this case, you need to find connectors of the same color and shape. It is through these ports that the connection will occur.

As a rule, a backup cable is not included in the equipment. Therefore, you will have to go to a specialized store and purchase the necessary cord. If you have doubts about which wire to choose, you need to ask a consultant for help. point of sale. He should first explain the task at hand.

Quite often the connection occurs using a cable called "tulip" ( RCA-RCA). His photo is presented below.

To connect equipment through tulips, you must first make sure that all colors match(connectors and plugs are identical). It is also necessary that the equipment is disconnected from the power supply.

The final stage is connecting the device to the network. The acoustic system switches to AUX mode. The sound should immediately come from her.

Advice! If extraneous noise occurs, you should turn everything off and choose a different cable.

Connection via receiver

IN modern TVs Some connectors are missing, but it is possible to connect through the receiver. This is a more difficult and less commonly used connection method. It will be appropriate when, in addition to the music center, you also need to output sound via auxiliary equipment or connect a subwoofer. In this case, the center itself is connected to the receiver (or amplifier), and the latter is connected to the TV.

Modern TVs are coming with built-in Smart TV, which significantly expands the range of functions. Auxiliary equipment allows you to reproduce sound in full.

Connecting an LG and Samsung TV to a music center

LG television equipment is slightly different from analogues from other manufacturers. Therefore, when connecting center speakers, you need to pay attention to a number of points.

Connecting a Samsung TV to a music center allows you to output multi-channel, high quality sound to the audio system speakers. This is done via an optical cable (if possible) or using TRS-RCA or RCA-RCA wires. The entire connection process is similar to that described above.

Selecting a cable for connecting equipment

It is very important to get it right select cable and connect the connectors on the TV and amplifier. If they are different, then you need to purchase a special adapter. In this case, you need to find out exactly which cord to use in this or that version.

Important! The presence of different inputs for connection requires the use of a suitable cable. For getting high-quality sound It is recommended to use HDMI whenever possible.

Every home has video and audio equipment. With simple manipulations you can significantly improve the quality of the reproduced sound. To do this, you need to connect the television equipment with other equipment, for example, with speakers, karaoke equipment, or an audio system using suitable wires. This will allow you to sing with friends and watch your favorite videos from good sound, spend happy holidays.

The best music centers according to customers

Music center LG OK65 on Yandex Market

Music center LG OK99 on Yandex Market

Music center Sony MHC-V21D on Yandex Market

Music center LG RK3 on Yandex Market

Music center Hyundai H-MC120 on Yandex Market

Center to the computer. After all, using this device to listen to music is very practical. You have access to a music library located on disks, downloaded from certain Internet sites, as well as radio broadcasts. After all, if you just use headphones or some external ones, you won’t be able to feel the fullness and richness of a high-quality recording. Therefore, true music lovers always try to connect a music center to a computer.

In order to do this, you will need a tulip cord (connects the speakers from the music center to the computer, and also connects the music center to the desktop). In shops and markets it is simply called “tulip”. You can purchase it at any specialized store (computer, household appliances, radio and power instruments, musical instruments, etc.), as well as in the conventional and radio markets.

In order to make the right purchase, you must know the model of your center, since the connectors of this cord will be selected specifically for the dimensions of your musical equipment.

If you are interested in how to connect a music center to a computer, then you should not follow the advice of some sellers and connect the speakers directly to the PC. Insert one end of your “tulip” into the input connector, which is located in the music center (it is original for each manufacturer, and its location will depend on the device of a particular model).

The second end of this cord will have a standard connector, the so-called “jack”. So that you understand what we mean we're talking about, pay attention to the speaker connector, etc. In order to understand how to connect a stereo system to a computer, you must find a special output jack for speakers or headphones. This is exactly where you need to insert this tulip jack. When you do this, the integrated acoustic elements will automatically turn off.

Your next step after you have connected the music center to your computer is to select a certain option in the center menu that will allow you to play the audio stream from the connected devices. This is basically the same button that turns on the sound of the connected TV. That's it, now you know how to connect a music center to a computer. You can enjoy your favorite songs!

Finally, I would like to draw your attention to the fact that some sellers will recommend that you purchase an improved “tulip” with gold plating. They will say that it will allow you to play music without any unnecessary noise. These cords will be significantly more expensive than regular ones. And although this gold plating will really have a good effect on the sound quality, you are unlikely to be able to feel this difference at home. After all, this is only possible with the help of special professional equipment. Therefore, if you are not a DJ or a professional sound engineer, this is of no use to you.

Currently, home appliances, consisting of music centers, are not widely used and are safely gathering dust on cabinets. In this regard, one gets the impression that it seems to have already served its useful life. Is it so? Equipment for playing music is of high quality and quite expensive, so it’s a pity to send such equipment to the trash heap. In our article, we will look at alternative uses of the device for playing music, for example, how to connect speakers from a music center without a center to a computer.

How to connect speakers from a working music center to a computer?

Let's ask ourselves how realistic it is to connect speakers from a stereo system to a PC. It turns out that this is quite possible. And for a functioning acoustic device, such a connection process is not difficult at all. For this procedure you only need to use one cable, appearance which looks something like this:

one side of the cable is topped with the usual black 3.5 mm minijack;
on the other side hang two tulips, white and red.

Important! There is nothing complicated about this cable; you can make it yourself, but to do this you must at least be able to hold a soldering iron correctly. To do this, you need to find the cable itself; if it is missing, you can use a cord from stereo headphones. The necessary plugs can be purchased in any radio parts department in a modern hypermarket or market. As they say, both cheap and cheerful.

How to properly connect a speaker from a music center to a computer:

We connect the purchased cable to the AUX connector, which is located on the rear side of the stereo system panel. These are two identical holes that are red and white.
We connect the second end of the cable to the output hole for the acoustic speakers on the personal computer. This is a large hole that has a green rim. And that's almost all.
After this, turn on the audio system and select the AUX mode on it.

Important! Each individual music center has its own setting, which differs from others, so to connect you need to choose individual instructions or you can try using the “scientific poking” method. Maybe you can guess and correctly determine the desired mode.

Now you can easily take our advice and simply connect stereo speakers from your audio system to a desktop PC or laptop, if you have a functioning music center. But there are times when the equipment for playing music is not working, how to solve the problem in such a situation?

How to connect speakers from a non-working music center

This situation is much more complicated and its solution requires certain costs. The problem is that the stereo system contains an amplifier that powers the speakers. The power of the sound card located in the computer device is not enough to drive the acoustic speakers. Therefore, connecting speakers from a music center to a desktop computer or laptop without the center itself is not so easy to do. But probably.

To do this, first of all, you need to find an amplifier or make it yourself. For this, both a separate device and the use of a board from old speakers will be useful. The main requirement is that the power of the selected amplifier should not be greater than the power of the stereo speakers.

Important! If necessary, you can solder the amplifier yourself - this is not such a difficult task. There are a lot of ready-made schemes of any complexity and various options on the Internet. The required parts can be easily purchased in any amateur radio department of a hardware store.

Sometimes there are computer speakers in the house, which may not have the functionality of several speakers. In this case, it is necessary to clarify this power and operating voltage, carry out comparative analysis with acoustic speakers of a home stereo system.

Important! The required specifications can be found in the instructions or on the rear panel of the audio system. If the parameters are suitable, then the problem is solved, and we can connect our device.

Video material

From the above article it is clear that an out-of-fashion music center can easily be turned into computer acoustics. To do this, you need to use your ingenuity and some tips given in our article. You can connect the aux to the music. center and enjoy the music.

Many of us often wonder how to connect a music center to a computer. After all, using this device to listen to music is very practical. You have access to a music library located on disks, downloaded from certain Internet sites, as well as radio broadcasts. After all, if you just use headphones or some kind of external speakers for your computer, you won’t be able to feel the fullness and richness of a high-quality recording. Therefore, true music lovers always try to connect a music center to a computer.

In order to do this, you will need a tulip cord (connects the speakers from the music center to the computer, and also connects the music center to the desktop). In shops and markets it is simply called “tulip”. You can purchase it at any specialized store (computer store, household appliance store, radio and power tools, music store, etc.), as well as in regular and radio markets.

In order to make the right purchase, you must know the model of your center, since the connectors of this cord will be selected specifically for the dimensions of your musical equipment.

The second end of this cord will have a standard connector, the so-called “jack”. So that you understand what we are talking about, pay attention to the headphone jack, computer speakers etc. In order to understand how to connect a stereo system to a computer, you must find a special output jack for speakers or headphones. This is exactly where you need to insert this tulip jack. When you do this, the integrated acoustic elements will automatically turn off.

fb.ru

How to connect a music center to a computer?

Personal Computer– a thing, of course, is universal. But for those who like to listen to music in excellent quality simple speakers will not bring the usual pleasure. And if you have a music center, you can use it to improve your PC. So, we will tell you whether a music center can be connected to a computer, and we will also explain how to do it correctly.

If you want to achieve incredible acoustic sound from a file played on a PC, try connecting a music center yourself. This is not difficult to do, even a beginner can do it. You will have to connect both objects - the computer and the center - using a special 2RCA-mini jack 3.5 mm cord. In fact, at one end of the cable there is a familiar 3.5 mm mini-jack plug, which is used to connect headphones. Its other end ends with two 2RCA “tulips” in white and red. By the way, if you have soldering skills, if you have the source material, creating a cord to connect a music center to a computer will not be difficult.

So, the procedure is as follows:

“Tulips” are connected to the AUX connector, which is located on the rear panel of the center. It looks like two holes, white and red.
Then connect the second end of the cord to the green speaker-out connector on the panel of your PC.
All that remains is to switch your music center to AUX mode and enjoy the purity of sound.

Is it possible to connect speakers from a music center to a computer?

If you have speakers from a music center, it may be quite reasonable to consider using them instead of a small-sized pair that reproduces sound with low power and poor quality, but without the central unit itself. But here comes the difficulty. The fact is that the block contains an amplifier that powers the speakers. And the power of your computer’s sound card is most likely not enough to run them. Moreover, such a direct connection may damage the sound card.

Therefore, connecting speakers from a music center to a computer can probably be done if you manage to find a suitable board or small amplifier. But here pay attention to the fact that the power of the speakers in no case exceeds this characteristic of the amplifier. By the way, those who are interested in electronics can solder such a device themselves. Accordingly, to connect the PC and the amplifier you will need the same 2RCA-mini jack 3.5 mm cord discussed above.

How to connect a stereo system to a TV? The main purpose of a music center is high-quality sound reproduction. You can also use it to “improve” the sound of other types of equipment - for example, a computer or TV. This article will tell you how to connect a stereo system to your TV.	Water leaks from the tank into the toilet Have you noticed that your water bills have suddenly risen without apparent reason? Or does a rusty track appear inside the toilet every now and then, which you can only get rid of for a couple of days? Both of these problems are most often caused by a leaking toilet tank.
Music center or home cinema? If you love listening to music, and at the same time do not agree to compromise on sound quality, you must have good audio equipment in your home. This could be a music center or home theater. The article will tell you what to choose.	Can I put a silicone mold in the microwave? With the advent of silicone baking molds, the life of cooks has become much easier. After all, such forms are convenient, easy to clean, and in addition, they allow you to create real culinary masterpieces. But can you put them in the microwave? Let's find out in the article.

WomanAdvice.ru

How to connect a music center to a computer or laptop

Many users are wondering how to connect a music center to a computer. This is due to the fact that in itself acoustic system Today it is practically of no value. After all, to listen to songs on the center you need to use a disk or flash drive. A computer connected to the Internet allows you to listen to any music and watch movies. The musical device in this circuit will be an excellent conductor for sounds.

It is also interesting that with the help of the center you can enjoy full-fledged radio broadcasts without using headphones. And the speakers of a musical device are, for the most part, much better than many speakers.

Choosing a cord

Connecting a music center to a computer should start with purchasing a cord. This wire is popularly called a tulip, as it has a branching similar to a flower:

It is used to transmit sound from one source to another. You can purchase it at an electronics or radio store.
For purchase network cable you need to know the make and model of your devices (both computer and music center), since different techniques plugs of different diameters are required.
Do not listen to those who advise connecting the speakers from the music center to the computer directly. This way you can short-circuit all the wiring and damage not only the speakers, but also the PC itself.

When choosing a cord in a store, make sure that it is of normal length. Remember how far your acoustic monster is from the computer, and estimate how much cable footage you need.

Connection instructions

Please note that this wire can be used to connect both a laptop and desktop computer. In both cases it is necessary to use a special plug, which is usually called a “jack”:

So, after we have sorted out the purchase of the wire, we carefully take it out of the packaging and straighten it. Working with a twisted cord is completely inconvenient.
Now we insert one end of the cable into the connector on the music center. Depending on the manufacturer, the entrance may be located in different places. Carefully inspect the device to find it.
We connect the second end of the cord to the computer. This plug will have standard size, so you can figure it out easily.
To connect the speaker to the computer, on the rear panel system unit you need to find a headphone input. This is where our “jack” is inserted. Once you insert the cable into the socket, the system will turn off automatically.
After this, you need to configure the music center. In order for the sound to start playing through it, you should select the “aux” item in the settings. The same option is used to transmit sound when connecting the device to a TV. Aux mode allows you to redirect audio from one device to another.

Connection diagram via mini jack

Another point worth knowing is that when purchasing a tulip, you will be offered models with gold plating. It is believed that they convey sound better. This is true, but it’s almost impossible to notice such a difference at home. To do this, you will have to connect the cord to professional equipment.

Making a tulip with your own hands

Adapters for connecting one equipment to another are quite inexpensive. But there are situations when you don't want to go to the store or you just like to tinker with electronics. In this case, you can make a cable to connect the computer and the music center yourself. To do this, perform the following manipulations:

Take a regular headphone wire with a standard plug and remove the insulation from it.
After this, you need to twist the copper wires into a tight bundle.
Now we wind one end of the wire to the audio input. Of course, it is best to solder the parts.
Next, the contacts at the center and the other end of the wire are connected.
After this, we connect the metal and plastic parts using electrical tape.
This cord can be connected not only to a computer, but also to a phone or tablet.

Of course, such a system is imperfect and its implementation will require a lot of material that is difficult to find in the home of an ordinary person. Therefore, it is easier to buy a cable.

When using a headphone cord, you should arm yourself with a lighter and singe the ends of the wire. This way you will remove the insulation and get rid of unnecessary hairs that will interfere with your work.

Conclusion

Using a music center as speakers for a computer is very reasonable and practical. Firstly, the device’s speakers convey sound much better than most computer speakers, and secondly, in this case your center will not gather dust on a shelf. After all, with the advent of the Internet, listening to music on discs has become no longer practical.

Tehnika.expert

How to connect a music center to a TV, computer, laptop and other devices + video

Music centers became widely available in the early 1990s. These were powerful sound machines with a radio, cassette deck and CD drives. Despite the fact that cassettes are no longer available for sale, and CDs are rapidly going out of fashion, the music center is not outdated today: a high-quality amplifier with speakers can easily provide the sound of both a formal evening and a wild party. How to properly connect a music center to a computer, TV or laptop?

What is a music center

As a rule, a music center is understood as a device combined in one housing for reproducing sound from different sources, as well as an amplifier. Cassette decks and CD drives are a thing of the past, but power amplifiers and speakers continue to improve. Large speakers, which are equipped with music centers today, operate in the power range from 90 to 150 W and satisfy the requirements of the most demanding music lover. The frequency range of the emitters has expanded significantly, and their acoustic characteristics have reached perfection. That is why many people try to connect other home equipment to the music center - a TV, a computer, a DVD player.

Modern music center controlled from your phone

The old centers, released 10–20 years ago, were not left out either. It’s easy to connect a tablet, phone or laptop to the music center via standard AUX, line-in or microphone input connectors. Your favorite music will sound in your apartment, office or country house. Switching is usually not a big problem. You just need to be careful and follow simple safety rules. Let's look at the most commonly used methods of connecting to a music center.

How to output computer sound from a laptop

Most “computer” speakers do not have high sound quality, and the built-in tweeters of a laptop are designed to reproduce system sounds. To enjoy a movie, enjoy your favorite songs or multimedia presentation, it is better to output the sound card signal to a music center.

The RCA-Jack adapter connects the music center and the computer

Both the main and auxiliary line inputs must be activated for audio to be sent to the amplifier. Check the instructions for your center.

Video: connecting an audio system to a computer

How to boost TV sound

Turn off the TV and stereo.
Find the AUDIO-IN connectors on the TV and select an adapter.
Connect the cable at one end to the TV.
Plug RCA “tulips” into the stereo.
Carefully lay the cable.
Turn on the devices.
Activate center line input.
Check for sound.