There is no sleep mode function in Windows 7. Why is there no “sleep” or “hibernation” command in the shutdown menu? Sleep mode - what is it?

Most PC users do not know how to disable sleep mode in Windows 7, and sometimes it is necessary to do this, since it is not always convenient for the user.

Initially, sleep mode is a mechanism for reducing power consumption.

At normal operation There is no loss of computer data in this state. If there is a sudden shutdown, the data can be restored with hard drive.

Sleep mode for laptops and PCs

There are several types of such “sleep”:

1. Simple. All files and documents are open on the PC. When entering this state, all initial data is stored in the PC memory, then system unit switches to energy-saving operation.
   The process is a bit like pausing when listening to audio or a movie.
2. Hibernation. This “sleep” option is used on laptops, since it is the most economical and uses less battery energy. All information is first saved on the hard drive, after which the computer goes into an energy-saving state.
3. Hybrid type. Enabled by default on desktop PCs with software. All parameters and files are saved on the hard drive before turning on, and the system unit automatically switches to an energy-saving state.
   When the lights are turned off or other power failures, all information is easily restored from drive C.

Disabling sleep mode on a desktop personal computer

If you don't need the hibernation feature and don't know how to disable sleep mode in Windows settings 7, then use the following recommendations.

Go to Start – Control Panel.

The settings we will need are in the “Category” section. Go there, then enter the “Hardware and Sound” item.

there, select the “Power Options” section, where you can change the current settings.

True, changing settings is possible if the user knows Account administrator.

This is where the “Sleep Mode Settings” will be. Click the button.

The “Power plan settings” window will look something like this, as shown in the picture below. Here you can disable the computer from going to sleep Windows mode 7.

In order for your computer to be in working condition all the time, the settings must be set as shown in the picture below, that is, the “Never” position to turn off the display and go to sleep.

Advice. In order to disable "sleep", go to the plan that is active in this moment. Next, go to the section “Transfer the computer to sleeping mode", where you need to select the "Never" function. After this, save the settings.

How to disable Windows sleep mode (7, 8.1, 10)

The main function of sleep mode is to save energy. But sometimes this mode can cause some inconvenience. For example, when watching movies or TV shows via the Internet.

To further disable sleep mode, you can enter additional Windows settings 7, and then click the bird next to the Sleep item.

In the Allow Hybrid Sleep settings, tap the Disable feature.

To cancel the automatic sleep function, select the “Never” function in the settings.

To do this, enter the number 0 in the minute status line. Click “Apply” and “OK”.

In the same sequence where there is a “Sleep after” value, you can disable sleep mode in the Windows 7 settings.

How to disable hibernation mode on a laptop?

The laptop has a “sleep” function, but it’s different. To change it, it is recommended to do other steps.

You, as a user, will need to change the current settings in the mode of switching power from the battery and from the network power supply.

So, in similar settings described above, you will see two values:

• "On battery"
• "Off the network."

To enter the settings, you need to click on the computer panel right click mice:

The “Taskbar and Start Menu Properties” functions will appear, then go to “Power Options” - “Plan Settings... “Balanced”, as shown by the red arrow in the illustration, go to “Change advanced settings...”.

In the parameters, find “Sleep hibernation” and set the value to “0”.

How to disable hibernation in Windows 7 (useful things)

Guide: How to disable sleep mode on Windows 7

You can not only change the hibernation settings in the way described above, but also in a different format.

For correct operation laptops, a system file hiberfil.sys is created on drive C.

Information about the RAM of Windows 7 is entered into this file when switching to one or another energy-saving mode.

If you disable the “sleep state” in the standard way, the file cannot be deleted, which means you will have to do it manually. This will free up several gigabytes of memory on your hard drive.

However, to enter this system file, you must enter the account password.

IN system files the document looks like the one shown in the illustration below.

How to enter the command line in Windows 7? To do this, go to Start – Run, or type command line through the search.

What is sleep mode on Windows 7. How to enable and properly configure this feature?

All modern personal computers have a Sleep button, but few people know what it means and how to use this function correctly.

The computer is in sleep mode: what does this mean?

The sleep schedule involves operating the computer in low power consumption mode. Using a sleep schedule, you can quickly resume the operation of your personal computer. Putting your PC into sleep mode is often compared to the “Pause” button when watching videos: the computer instantly stops all actions and is ready to resume work at any time.
Sleep mode has two branches:

• Hibernation regulations
• Hybrid sleep mode

Let's look at the concepts in more detail.

Hibernation Mode

Hibernation is a sleep mode designed specifically for laptops. The difference from sleep mode is the following: when entering sleep mode, the PC saves all settings in memory, and, as previously mentioned, the PC goes into low power consumption mode. Hibernation affects Personal Computer differently: when this regulation is enabled, all actions and settings are saved on the device’s hard drive in a file called “hiberfil.sys”.
Hibernation should be used if the PC is not planned to be used for a long time and there is no way to charge the device. The mode will help save electricity.

Hybrid sleep mode

Hybrid sleep mode is mainly used on desktop PCs. Hybrid sleep mode consists of sleep mode and hibernation mode. Thus, all information and parameters remain both on the SSD and directly in the device’s memory. If the hybrid sleep schedule is running, going to sleep puts the PC into the hybrid sleep schedule. On desktop PCs, hybrid sleep mode is always enabled.

How to enable sleep mode on Windows 7

To enable sleep mode on operating system"Windows 7" follow the instructions:

• Click the Start menu icon
• Next, click on the arrow pointing to right side. The icon is located next to the inscription “Shutdown”
• Select the required regulation:

The hybrid sleep schedule is enabled only if the corresponding checkbox is checked in the power settings. To transfer the PC to this regulation, you need to left-click on the word “Sleep”. In this case, the PC will go into hybrid sleep.

Need to change sleep time on Windows 7

To change the sleep time in the Windows 7 operating system, follow the instructions:

• Open the start menu
• In the search bar, enter “power supplies” and open the corresponding tab
• After completing the previous step, the Power Options menu will open. Here you need to go to the panel located on the left and click on the inscription “Setting the transition to sleep regulations”
• If you want the computer to go into sleep mode after inactivity, refer to the “Put the computer to sleep” option and select the desired time interval, click on “Save changes”
• To change the sleep time, click on the “Change advanced power settings” tab
• Click on “Sleep”, click on “Sleep After” and enter the desired time

How to turn off sleep mode on Windows 7

To disable sleep mode on the Windows 7 operating system, follow the instructions:

• Go to the start menu and in the “Search” line enter “Power consumption”
• You need to click on “Set up power plan”
• Next you need to go to the “Put the computer into sleep mode” tab, here you need to select “Never”, which will disable sleep mode
• Next you need to save the selected settings. To do this, click “Save changes”

Possible problems: why Windows 7 does not go to sleep

There are two most common problems:

• PC automatically wakes from hibernation or sleep mode
• Wake up the device at the same time

Let's look at the problems in more detail.

• To solve both problems, you need to go to the “Power Options” menu
• Click on “Set up power plan”
• Next, click “Change advanced power settings”
• You need to open the “Sleep” tab
• Open the Allow Wake Timers tab
• Select "Disable"
• Save changes

Setting up sleep mode on Windows 7: video

When working at a computer, any user sooner or later needs to take a break. During a short pause, it does not make sense to completely turn off the computer, since the subsequent boot will take a lot of time and you will also have to re-open all the applications you are using. That's why Windows 7/10 has this useful feature, as “Sleep mode”, or “Sleep” mode. There is also another state similar to "Sleep" called. We will not consider it within the scope of this article.

What is Sleep Mode

Sleep mode, previously called Standby mode, allows you to put the computer into a state of reduced power consumption, in which some components stop receiving power and turn off, while others continue to consume the energy necessary to store information and quick exit computer from "Sleep". All information about current state files and applications when entering sleep mode are copied to RAM, which remains volatile. Those. If there is a power outage, all the information recorded in it will be lost, and you will have to start the computer “newly”.

If the power supply is not interrupted, then when the power button is pressed (or the so-called wake-up timers are triggered), data is quickly read from random access memory and the computer returns to normal operation in a matter of seconds. And what is most important, it goes exactly to the state that was at the moment of “falling asleep.” All open documents and the applications will appear on the desktop, and you can continue working without any delays.

The hibernation mode, related to “Sleep,” differs in that it does not require power supply, i.e. This is a completely non-volatile state. All data is saved on the hard drive in the file hiberfil.sys, from where it is read when Windows startup. You can read more about hibernation in a separate article.

How to enable and configure Sleep mode in Windows 7/10

You can manually put your computer into Sleep state using the Start menu. We go into it and select the desired item in the “Shut down” list.

If suddenly the list of shutdown options does not include the line “Sleep” or “Hibernation”, you must perform the following steps. First, open the Control Panel and go to the “Power Options” section.

Then on the left click on the item “Action of the power button”.

You will be able to configure Shutdown Options at the bottom of the page. Place a checkmark next to “Sleep mode” and save the changes.

The corresponding line should appear in the shutdown submenu of the Start menu.

In the "Power Button Action" section, you can immediately set "Sleep" as the mode that the computer will enter when you press the power button. For laptops and tablets, the action of the power button is configured separately for the “On Line” and “On Battery” states.

The computer can go into sleep mode not only after manual manipulation, but also automatically after a specified period of inactivity. To set the parameters for the computer to go into the “Sleep” state, return to the “Power Options” section and click on the link “Setting up a power plan” (or “Setting up a power plan”) next to the active scheme.

Here, in the drop-down list, select the required time interval for the “Turn off the display” and “Put the computer into sleep mode” parameters.

After setting, do not forget to click the “Save changes” button.

Additional Sleep mode settings

To produce more fine tuning sleep mode, and also immediately eliminate some of the problems that often arise with it, we will set additional parameters for the current power supply scheme. To do this, click on the “Change advanced power settings” link.

In the window that opens, we are only interested in certain items. First, open the first branch with the name of the selected power plan (in our case, “Balanced”) and set the value of the “Require password on wakeup” parameter. If you do not want to constantly enter your password, select “No”.

Now expand the “Sleep” item and select the “Allow wake timers” option.

- these are different system events, which can wake up your computer from sleep mode without your direct participation. For example, Windows will want to install updates or a task from the Task Scheduler will run. All these events are configured by the user, but he can forget about them and as a result, the computer’s “sleep” will be “disturbed.” To avoid manually searching for such events, simply set the “Allow wake timers” parameter to “Disable” and all software timers will be ignored.

The “Sleep” branch also allows you to enable the so-called hybrid sleep mode, but we’ll talk about it separately below.

Basically, basic setup The “Sleep” mode is enabled, and in most cases there is no need to touch the remaining parameters. If you wish, you can experiment with other settings, however, it is better to understand the essence of each action performed.

In addition to software events, devices can wake the computer from sleep mode. Most often this is a keyboard, mouse, network adapter or USB controller. If you don't want your computer to wake up after accidental pressing buttons on the keyboard or due to an inadvertently touched mouse, perform following instructions. Go to Control Panel – Device Manager and expand, for example, the “Keyboards” item. Right-click on the "HID Keyboard" line and select "Properties".

In the window that opens, go to the “Power Management” tab. Uncheck the box “Allow this device to wake the computer from standby mode” and save the changes using the “Ok” button.

Do the same with the mouse located in the "Mice and other pointing devices" section. We won’t focus on other devices that can wake a computer from “Sleep.” Here everything is done according to a similar scheme.

Hybrid sleep mode

This is a kind of combination of normal sleep mode and hibernation. When the computer goes into the “Sleep” state, the work session is saved not only in RAM, but also on HDD. If there are no power failures, the computer uses the RAM data when waking up from sleep; if the power goes out, the data is loaded from the hard drive. That is, in any case, you will continue working from where you left off.

You can enable hybrid sleep mode in the advanced power options window. Expand the “Sleep” branch and select the “Allow hybrid sleep mode” option. Set it to “On” and save the settings.

That's all we wanted to tell you about Windows 7/10 sleep mode. We hope that the information provided will be useful to you.

Any computer session, during which several programs can be launched simultaneously and many files open, must end at some point. At the moment of its resumption, it is not entirely convenient to open all the same windows, but users who know what is sleep mode and actively use it, successfully avoiding such inconveniences. How? Everything is quite simple.

Sleep mode - what is it?

The low power consumption mode, which the machine can enter automatically or at the operator's command, is called sleep mode. Although all previously running processes in the system are stopped, the computer does not stop working completely; it is in standby mode. When Windows goes into sleep mode, all data about the state of the previous session is stored in the device’s RAM. By turning on the PC again, the user can start working with all previously open files and programs in just a few seconds. Why is that? Because there is no need to boot the computer from scratch.

If the machine is running Windows 7 or 8, XP or Vista, there is also the option of hybrid. They are different from the sleeper. What is the difference? If the PC is in sleep mode, data about the state of the previous session is stored in RAM; if it is hibernating, such information is temporarily stored on the hard drive in the file hiberfil.sys. This file is created automatically by the system and is located in the root folder of the partition on which the OS is installed. When using hybrid mode, data is saved both in RAM and on the hard drive.

How to put your PC into low power mode

If the user wishes to manually enter Windows sleep mode, he must do the following:

Using the functionality of the system, it can be configured so that the computer will switch to a state of reduced energy consumption automatically after a specified period of time. To do this you just need to know how to set up sleep mode in windows via the control panel. Everything is simple here too. In the first step, enter the control panel and select “System and Security”.

In the “Power Options” section we find a link, after clicking on it, we proceed to selecting a time interval.

In the next step, everything is intuitively clear, how to configure Windows sleep mode as the user wishes (after how many hours or minutes the PC should go to “sleep” automatically): select a value from the drop-down list. Upon completion of these steps, save the changes.

You can also configure additional mode parameters. For this:

• Select “Power Options” in the control panel;
• Select the power plan that you want to configure, click on “settings”;
• Click on the plus sign next to “Sleep”, set the required parameters, and save the changes.

If Sleep is not available

Performing all these steps will not be difficult if sleep mode is enabled by default. Unfortunately, things could turn out differently. Example: there is an item in the menu, but it is not available. Here it is necessary to find out the reasons for the current situation. How to do it? It's simple:

• Right-click on “Start”;
• In the search field enter cmd;
• On the command line we write powercfg /a;
• Press the Enter key.

In the window that appears, read the system message and perform the required actions.

Shutdown

It will not be superfluous to know not only the activation method, but also how to disable Windows sleep mode. This is done using the command line:

Now, if the user hovers the cursor over the arrow next to “Shutdown”, he will not see the “Sleep” item.

How to disable Windows sleep mode using the same method using command line, you can turn it on. To do this, instead of the command powercfg /h off, enter powercfg /h on.

As you can see, there is nothing complicated about enabling or disabling Windows sleep mode. There is also nothing complicated in setting it up and changing additional parameters. If you have any questions about this topic, you can write about it in the comments below.

.

In this article we will talk about all the most important aspects"Sleep mode" settings in the operating room Windows system 7.

OS settings Windows 7 And Vista

In order to configure the computer to go into sleep mode after a specified period of inactivity, you need to configure the settings in the appropriate section of the Windows 7 Control Panel.

Open the Start menu and select Control Panel. If the default view of the panel is in Category mode, change it to Small Icons mode.

Find a link to “Power Options” in the list of items. Here, as the name suggests, hides tools for configuring your system's power settings (if you're using a desktop computer, we recommend activating the standard "Maximum Performance" plan by default).

To start setting up sleep mode, click on the “Set up power plan” link next to the default activated plan. The screenshot below shows an example of displaying the settings menu on a laptop. In case you are setting up desktop computer, the Battery Power section will not be displayed.

Select the period of time you need after which the computer will be put into sleep mode. Gradation - from 1 minute to 5 hours.

If you are using “Sleep mode” (“Standby mode”) in Windows 7 or Vista, you probably noticed an unpleasant feature: the slightest movement of the mouse wakes the computer from rest (for example, if you accidentally hit the table).

Sometimes it's very annoying. For example, the system can wake the computer from sleep mode while watching a movie on home theater when high volume sound effects cause furniture to vibrate.

To get rid of this inconvenient feature of the system, you need to do the following:

• Open the Start menu »
  
  
  • Control Panel "
  • Device Manager "
  • "Mice and other pointing devices" tab"

• Power Management tab »

• Uncheck the " Allow the device to wake the computer from standby mode»»
• Click "OK"

After applying this setting, the computer will no longer be awakened from sleep mode by an accidental twitch of the mouse. In the future, to wake the system from standby mode, use the keyboard - simply by pressing any key.