Lenovo g50 goes into BIOS. How to enter BIOS on a lenovo laptop. How to enter BIOS lenovo g50: branded button

What is Lenovo Bios and how to enter it? The guys from Lenovo decided that in order to to enter the BIOS press the Fn + F2, F2 or Delete keys (quickly press at start or hold) is already a thing of the past and decided to make the user's life even "better". By the way, the main article is.
With all this, removing the splash screen from the screen and reading the POST at the bottom by pressing the TAB key (as before) after turning on the laptop or computer is also now impossible.
And here's what they came up with:

To enter the BIOS of the Lenovo G50, you need to hold the recovery button when starting the laptop (it's a small round one next to the start button), then a menu will appear in which you will enter the BIOS.

The " NOVO " - needed to start Lenovo One Key Recovery System... You can also use it to get into the Bios settings in the Lenovo G50. It should be said that turning on is possible if your laptop is "sleeping" or turned off.
In the case when using standard methods, which everyone writes about on the forums on the Internet, you cannot enter the BIOS, on such laptops as: g50, g500 and g505, g700, g510, then I recommend reading the user manual first. There is a section that contains all the necessary steps to enter the BIOS. Read about this in the article
Many laptops have similar parameters for activating BIOS (g500, g505 and g510). The same parameters can be applied to other Lenovo laptop models, for example to g50-30... It will be useful to read the article
You just need to restart the laptop, and when it starts up, you need to press the button - Novo ... There will be 2 download methods to choose from: UFFI and Legacy Supportboth will suit us.
In the case when the question: “ How to enter BIOS”, And remained open, then you need to go to the official website of Lenovo. There will be all the detailed information on activating and updating BIOS.
And finally, as a standard, you can try to hold or quickly press F2 to enter the main section. When F2 does not work, then you can enter the BIOS using the F12 key. Also hold down, or press quickly.

Lenovo G50 Bios. Video

There is not a single user who would not be faced with the need to log into BIOS on a laptop. Most often, questions on this topic arise from owners of Lenovo devices. Today, there are several ways to enter BIOS on a g50 device from this manufacturer.

How to enter BIOS Lenovo g50: keyboard shortcut

• Lenovo produces various laptops and in each of the models the entrance to the BIOS is practically the same. The BIOS call is carried out by pressing one or more buttons on the laptop keyboard at a certain moment after pressing the power button.
• In different modifications of the model lenovo devices g50 key combination remains the same.
• Depending on the model modification, to call the BIOS, you need to press the FN button or the FN + F2 key combination before starting the operating system when the device is turned on.

How to enter BIOS Lenovo g50: branded button

Lenovo g50 laptop and its modifications are equipped with a special proprietary Novo button. She is responsible for starting the Lenovo OneKey Recovery data backup and recovery system.

When pressed, the user can also get into the BIOS. The key is located on the body of the device.

Sequencing:

• if something is wrong with the device, there is a malfunction in its operation, then first you need to turn it off, you can do this by holding the "Power" key for no more than 15 seconds;
• find the Novo button on the device case and press it for no more than 3 seconds;
• the laptop will start to turn on, a small window will pop up on the screen, in which you will be asked to select 1 of 3 functions;
• to get into the BIOS, you need to select the "BIOS Setup" section using the arrow buttons and press the Enter key.

How to enter BIOS Lenovo g50: Windows 10

This operating system has its own differences, including the entrance to the BIOS will also be different:

• go to "Settings" through the "Start" menu;
• find the item "Updates and Security", go to it;
• the "Recovery" window will open;
• find the "Restart now" button, click on it, it is located in the "Special downloads" tab;
• the device will start to reboot, a screen will appear on which you need to select the "Troubleshooting" section;
• click "UEFI Software Options" and then "Restart";
• after reboot, the BIOS window will open.

How to enter BIOS Lenovo g50: command line

In this case, it is necessary:

• call the system command line;
• enter the following code into it: shutdown.exe / r / o;
• automatic transition to BIOS will be performed.

Lenovo G50-30 Model 80G0 how to enter BIOS?

To enter the BIOS (boot menu) on Lenovo G50, you need to hold down the "when you turn on the laptop" button

Novo button

Button "Novo" - serves to lenovo launch One Key Recovery System or for customization Bios in Lenovo G50. Turning on is possible when the laptop is turned off or in sleep mode

Install Windows 7 on Lenovo g50 laptop

To install Windows 7 on Lenovo (Lenovo) G50, you need to change to Windows 7 OS in the BIOS in the Exit -\u003e OS Optimized Defaults -\u003e Win8 64bit tab.

We save the settings (Save & Exit.) -\u003e Set the boot windows disk 7! -\u003e Press the button "Novo" (Novo Button Menu) and select "Boot Menu".

If you have error 0X000000A5 in Windows 7 on Lenovo G50-30

If Windows 7 is already uploaded to hDD and the error 0X000000A5 appears, then you can eliminate the blue screen of death error as follows:

1. We go into the BIOS, in the second tab, change USB3.0 to USB 2.0.
2. AT last tab change OS from Win8 OS to Win7 OS.
3. Select Load Defalt Settings.
4. Save & Exit.
5. Install Windows 7
6. Change USB2.0 to USB 3.0.

Why do we need BIOS?

The laptop is available in various modifications. Why might you need to know how to enter the BIOS of Lenovo G50 and other laptops in the series? Of course, Lenovo specialists strive to provide consumers of their products with perfect solutions that will require a minimum level of knowledge from the owner in the course of operation in setting up and maintaining the hardware configuration. It should be understood that no computer can be 100% insured against the manifestation of such unpleasant phenomena as critical errors and malfunctions. It is these moments that dictate the need to have information on how to enter the Lenovo G50 BIOS of various modifications.

Various configurations

Despite the fact that Lenovo produces laptops of a wide variety of hardware content, the procedure for entering BIOS is generally the same for them. In order to call the setup function, you need to use the hardware buttons on the laptop or their combinations. For example, there is a laptop Lenovo G50-70. How to enter BIOS? It is necessary to press the F2 button on the keyboard or use the FN + F2 keys when turning on the computer. It should be noted that in other modifications the Lenovo G50 notebooks require the same actions from the user to call the setup screen. That is, the answer to a question often asked by owners of, for example, Lenovo G50-30, how to enter BIOS, will be using the same key combinations as in the 50-70 model.

Branded NOVO button

One of Lenovo's proprietary offerings to its customers is Lenovo OneKey Recovery Software, which is a system designed to provide reserve copy data and their recovery on computers manufactured under the Lenovo brand. In terms of launching BIOS settings, the hardware component of the system in question is noteworthy - the Novo key located on the laptop case.

How to enter BIOS using one button

Probably the simplest answer to the question of how to enter the Lenovo G50 BIOS is to follow these steps:

1. You must first shut down your laptop completely. To do this, hold down the "Power" key for at least 10-15 seconds.
2. The second step to enter BIOS is to press the NOVO button on the laptop case. It features a curved arrow. Hold the NOVO key for 1-3 seconds and then release it.
3. The consequence of the previous step will be to start the laptop, and a small window will appear on the screen, with which you can select one of three functions.
4. To enter the settings, select the BIOS Setup item using the arrow keys on the keyboard. After the desired item is highlighted, press Enter.
5. BIOS entered.

Why doesn't it work?

A situation may arise when the window with a choice of items does not appear. The first thing to make sure in this case is that the laptop has been turned off completely.

The second point that does not allow to achieve success is often "overexposure" or, conversely, pressing the NOVO button too shortly.

Windows 10

Modern trends in the development of the computer industry have led to the fact that most laptops are equipped with new version BIOS settings management system - UEFI. In addition to various additional functions, this hardware configuration management software brought the ability to reboot the BIOS directly from the operating system. Let's take a look at the Lenovo G50-30 as an example. How to enter BIOS using the capabilities of Windows 10?

To reboot to the UEFI settings screen directly from Windows 10, you need to go the following way.

1. We call the "Computer Settings" screen. To do this, you need to click the "Options" button located in the "Start" menu.
2. In the window " Windows settings"You go to the" Update and Security "tab.
3. The next window is called "Recovery".
4. Next - pressing the "Restart now" button located in the " Special options downloads ".
5. The laptop will reboot and a screen will appear in front of the user.

• We select the item "Troubleshooting".
• Go to the Advanced Options menu.
• Next - the button "UEFI software settings".
• After clicking the "Restart" button, the laptop will reboot into the UEFI-BIOS.

Command line

To reboot to the screen with which you go to the BIOS settings, in addition to the above method, you can apply the capabilities command line... To do this, use the command: shutdown.exe / r / o

Conclusion

Thus, applying one of the above methods, everyone who bought a Lenovo G50 laptop will no longer ask how to enter BIOS. Isn't it really a simple procedure?

BIOS is a very important component of a computer and is part of the system software... With its help, when the computer is turned on, the operability of all components is tested and checked. It allows the user to make changes to the operation of individual components of the computer, set the boot priority, date and time, etc. In this article, we will look at how on laptops from Lenovo.

AT different models laptop brands Lenovo login slightly different. If you want to see how to do this for the first time, you can read the instructions for your laptop. There is also a way to find out which login keys your model is using. Within 2-3 seconds after turning on the laptop, they are displayed on the screen as a hint.

In general, most lenovo models to enter the BIOS, use the F2 key or the combination Fn + F2. But not all models respond to their pressing.

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button near which an arrow is indicated. This button is located near the power (charging) input. On a switched off laptop, press and hold it until “Novo Button Menu” appears.

Then use the up / down arrows to select "BIOS Setup". Thus, you can go to the settings in the BIOS. If you change something in the settings, press Fn + F10 to save the changes and exit. You will be prompted to save the changes and then press Enter to confirm them.

How to enter settings on a Lenovo b50-30 laptop

On this model, you will not enter the BIOS settings using the Delete, F2, F8 or F10 buttons, and there is no button near the power input. The button for calling the “Novo” menu is located on the right side near USB port... In order to press this button you need a pin or sharp object. Then you will be taken to the “Novo Button Menu” menu.

Configuring BIOS on Lenovo b50-70 to install boot from a USB flash drive

To configure booting from a USB flash drive to Lenovo b50-70, install it in the USB port and go to the settings using the Fn + F2 key combination. Go to the Boot tab in the Boot Mode section and change UEFI to Legacy Support. In Boot Priority, also change to Legacy First. Then we exit and confirm saving the changes.

After restarting the laptop, you again need to go into the BIOS settings by Fn + F2. Go to the Boot tab. Here, in the Legacy section, a hard disk, a drive and a USB flash drive have appeared. To boot from a USB flash drive, transfer it to the first place using the Fn + F6 keys.

After installing the operating system from a USB flash drive, you can restore the default settings (to factory settings) in the Exit section. Here we select the Load Default Setting item.

Features of entering BIOS on Windows 8 laptops

Consider how to log into BIOS on a Lenovo v580c laptop with installed Windows 8. After pressing and holding the special button (with an arrow) near the power input, the Windows 8 system recovery window appears.
Select the language, keyboard layout, then the "Diagnostics" mode (computer recovery). Then go to "Advanced Settings", then to "UEFI Firmware Settings" and click on the "Restart" button. After we get to the BIOS menu.

Another case when after windows installations 8 on a laptop v570, the BIOS entry keys F2 and F12 are automatically blocked. Also, this model does not have a dedicated Novo button.

To unlock them, you need to remove battery, unscrew the bottom cover and remove the battery for a few minutes. Thus, the BIOS settings are reset. After that, the keys will be unlocked.

Laptops of the Lenovo company are extremely popular in Russia and other countries. This is due to the fact that laptops are reliable, unpretentious, efficient and have adequate cost.

Products of this Chinese manufacturer literally flooded all the shelves of computer stores. But along with all the advantages, they have one small drawback: in some models it is completely unclear how to enter BIOS. And this is necessary when installing the system or making any settings. If laptops of other companies react to keyboard buttons, Lenovo refuses to do so. Especially the models of the G series. Hence the question arises: "How to enter BIOS. We will try to answer it.

Why do you need to enter BIOS?

BIOS is a basic input-output system. It is she who allows you to communicate with a PC or laptop at the hardware level. BIOS settings greatly affect the performance of the computer as a whole. You also need to go into it before installing the operating system in order to choose to boot from the installation media, and not from hard disk... In general, it is very useful to know such information, as it may be useful in the future. And at the most inopportune moment. Therefore, it is highly recommended to know how to enter the Lenovo G50 BIOS or some other equally capricious laptop model.

In addition, the BIOS can be incredibly useful for restoring your computer's performance. It is he who can reset the hardware settings to the factory settings. Among other things, it is the settings of the basic I / O system that govern the operation of the hardware filling of the laptop. Therefore, we will analyze in more detail the question of how to enter BIOS

How to enter BIOS?

On ordinary laptops this is helped by the Enter or F2 buttons. But it's a completely different story with the Lenovo G50-45. How to enter BIOS on this laptop?

Somewhere on the side of the device, near the power connector, there is a small invisible button. She is what we need. Sometimes it is indicated by an arrow. But it may well be without an arrow. This is the "New" button. It provides various options for loading a laptop:

• loading into BIOS;
• normal load;
• boot menu;
• system Restore.

In our case, we need to select boot into BIOS. Here's a tricky button.

Please note that in some laptop models, for example, B580 or B590), this very button may be located next to the power button of the device. However, on the above models, there is another way to enter BIOS - you need to press the Enter key at boot time, see the desired line in the menu and press F1 to access the BIOS settings. In particular, this concerns the B580 model. As for the Lenovo G50-30, we already know how to enter the BIOS of this laptop. With the help of a small and inconspicuous "Novo" key. Let's move on to the main BIOS settings on Lenovo laptops.

Settings for installing Windows 7

Recently, Lenovo laptops come with a preinstalled Windows 8 operating system. But it does not suit everyone, and when you try to install a 7 on a laptop, the laptop starts to show up with errors. The situation can be saved by the competent setting of the BIOS of the device.

Let's take a look at the example of the Lenovo G50-30 laptop. We already know how to enter BIOS, so let's go straight to the settings. We go to the Exit tab and look for the OS Optimized Defaults item there. It stands there windows system 8. We need to change it to "seven". That's all!

However, after that it is necessary to load the optimal BIOS settings. This must be done before each installation of the operating system:

• to do this, on the same Exit tab, select the Load Default Settings item;
• then you need to click OK;
• press F10;
• restart the laptop.

After performing all these manipulations, the installation of the seventh version of "Windows" will be possible. There will be no more problems.

How do I change the boot order?

Sometimes you need to change the boot order of your device. That is, to make sure that the laptop is not loaded from the hard drive, but from the installation media (CD or flash drive). Consider the G50:

• We already know how to enter BIOS, so we will skip this stage.
• After pressing the notorious "Novo" button, a menu will appear, where, among other things, there will be an item Boot Priority. Here he is what we need.
• Go to this item and see a list of devices that are currently available for download. If you are installing the operating system using a USB drive, then you need to select the USB-HDD item.
• And if an optical disc is used as the installation medium, then select the "ODD-device-name" item.

After that, the computer will start to boot not from the hard drive with the pre-installed operating system, but from the bootable media. And you should be able to start installing the system.

Conclusion

So, how to enter the Lenovo G50 BIOS? The answer to this question has been received. To enter BIOS there is special button called "Novo". It can be located both on the side of the device (near the charging socket) and near the laptop power button. Pressing this button activates an alternative menu, in which there is also the possibility of entering the BIOS. This is quite convenient, although very unusual for some old PC users.

Lenovo is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Lenovo equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process the question is raised: how to enter the BIOS in Lenovo?

First, you need to figure out what BIOS is and what it is eaten with. So, the BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and the OS and allows you to customize it. And the BIOS setup is standard setting A PC that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is found on any computer, be it Lenovo B560, Lenovo S21 or M5400.

To date, several different versions BIOS, which differ slightly in appearance, but as far as functions are concerned, everything is identical here. Each of the versions is used for initial setup computer and to check it. BIOS functionality includes:

• Setting the date and time;
• Choice boot sector - the device from which the operating system will be installed or loaded;
• System component check, including health check random access memory and hard drives;
• Connection protection - password on your laptop to protect personal data.

How to enter BIOS

On different models Lenovo's BIOS login methods on a laptop may differ. First try standard way login - at startup personal computer you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Lenovo models, the BIOS does not boot when you press F2 or Fn + F2 - for example, Lenovo Legion Y520, Lenovo G70, G50-30 or G500. If you tried to enter the bios using the above method, and you did not succeed, following instruction for you:

1. On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It's called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
2. If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:

1. As you probably already guessed, in order to enter the BIOS on Lenovo, you need to go to the BiosSetup item. After you select it, you will see that the laptop has entered the BIOS and you can configure it as you like.

Two secrets of running Bios

But if you still did not manage to start the BIOS using one of the above methods, and the laptop is running Windows 8.1 or higher, we will tell you two startup secrets.

• You need to turn on your PC. AT running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
• A menu opens to us where we select the "Options" - "Update and Recovery" - "Recovery" items.
• Here, in the "Special boot options" section, click on the "Reload now" button.
• Next will open blue screen with tiles. Open the "Diagnostics" tile by clicking on which you will be taken to additional parameters.
• You need to open the item "UEFI Firmware Options" and click the "Restart" button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS - you need to press a certain button on the keyboard. To do this, the user clicks on "Shutdown", waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts in the old way - the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the function quick launch, which is based on sleep mode - enter BIOS without turning off the PC, but restarting it.

Some useful tips:

• After the entrance to the Bios has been carried out, go to the various settings of the system parameters and its loading in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. And after making all the changes, go to the “Exit” section and select “Save & exit”. After that, the laptop will be rebooted, and on a new start, all the settings that you had to set before will already be taken into account.
• If the above methods of entering BIOS on a Lenovo laptop do not work, try holding down the F12 key while starting the device until the BIOS starts - this method works on some Lenovo models.
• Very rarely, but it still happens - in some models the F1 key works (you need to press it several times while the laptop turns on).
• Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
• Before exiting BIOS, be sure to save all the changes so as not to get lost.

remember, that bios setup Is a very serious action that requires maximum understanding of the process and great attention to detail. You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do the right thing, it is better to call qualified specialists, this will save money, time, and nerves. We hope this article helped you figure out how to enter Bios.