How to remove the password on your computer if you forgot Windows 7. If you suddenly forgot your Windows password: Break the password! Windows password cracking software

Removing the password when entering Windows 7 is quite simple. This will require a minimum amount of time as well as knowledge. This kind of operation usually takes no more than a couple of minutes.

It can be done different ways: via a special console, command line or by dumping key data from SAM. Each method has its own advantages and disadvantages.

Why set a password

It often happens that a PC stores some important and confidential data, access to which should be limited. Microsoft Windows makes it possible to easily restrict the circle of persons who have access to files on the computer by installing a special key. It can be its own for each person, if there are several users.

Also, an access code is required to protect information on a PC to different owners from each other. For example, it is not uncommon for parents to do this so that curious children cannot get acquainted with some information they do not rely on.

Remove the password through the "Run" console

One of the most simple way disable the access key entry on the OS - using the "Run" item. It is quite easy to access it - just click on the "Start" button. Most often, the item in question is present on the right side of the window that opens.

Command entry

To disable the function in question, you must enter a specific command. It will open a special applet to do this.

The process of entering the command itself is as follows:

• open the menu of the "Start" button;
• click on the "Run" item;
• in the field that opens, write "control userpassword2".

After completing these operations, a window called "User Accounts" will open.

It contains two tabs:

• "Users";
• "Additionally".

It is necessary to stop your attention on the first tab. Since it is in it that all account settings are carried out, including changing the login, access key and other attributes. Plus, you can easily add new accounts or delete old ones if you want.

Disable password

To disable Password, just open the corresponding window ("accounts" -\u003e "users"). In it, you must uncheck the box titled "Require the username and ...". In this simple way, you can disable the need to enter a Password.

We confirm the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

• in the window called "Accounts", double-click on the desired line (admin, user or something else);
• click "OK".

A window will open containing three fields. Only the top should be filled in, login is written there. The rest are left blank. After that, click on "OK" again. After performing these operations, when you start Microsoft Windows, you will not need to enter Password. This is quite convenient if only one person has physical access to the PC.

video: Password reset

Remove password when Windows starts without programs

Also, Password in the operating system in question can be unstuck without using the "Run" item, as well as various kinds third party applications... To do this, just use a special command line. In this way, you can avoid the need to enter a Password when you turn on the computer, as well as when it wakes from sleep mode.

Command line configuration

In order to configure the command line, you must use the disk with the Windows distribution kit. This method of setting and resetting the access code is suitable if it is forgotten, and otherwise it is not possible to start the OS.

First of all, you need to install the boot from a CD or other device containing the distribution kit through BIOS. After that, you should reboot and start the installation.

After that, the following actions are performed:

1. CmdLine - enter cmd.exe;
2. SetupType - replace parameter 0 with 2;

• select section 999 and click "Unload bush";
• extract the distribution and restart the PC.

Reset password and login

After loading operating system the user will immediately see the command line window. To reset the password, enter the following command: net user username

If, for some reason, User has forgotten the name of the account, then you can simply write net user without parameters. This will display all available titles and select the required one.

If the new Password is not supposed to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: drive name: Windowssystem32net user username new-key.

It is also often required to create a new account without an access key.

To do this, you need to run the following commands in strict order:

These commands perform operations in strict order:

1. creating a new User;
2. adding it to the Administrator working group;
3. removal from the Users group.

The considered reset method is quite complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There are many different ways to reset your login code. But all of them only change the information stored in a special file called SAM in various ways. It is he who is used by the OS to place data concerning both User and Password in it. This abbreviation name stands for Security Account Manager.

The file in question has no extension, since it simply does not need it. It is a direct part of the registry, located in the directory systemrootsystem32config... Also a copy of the file in question is available on disk disaster recovery, if this function has not been disabled earlier for some reason.

Editing of this file changing the operating system login parameters is the most difficult way. To work with SAM you need a specialized software from third party developers. All SAM operations must be performed with the utmost care and accuracy.

How it works

The most popular application for changing data in a SAM file is the active password changer. Before starting work, you need to copy the application to any media or other hDD FAT32.

After performing this operation, you must:

1. run the file from the password folder "BootableDiskCreator";
2. in the window that opens, select "Add USB ...";
3. activate the button "Start".

After completing all the above steps, a bootable USB drive will be created.

The process of changing data using the application in question looks like this:

This way of working with accounts and their attributes is as secure as possible. Since it avoids editing the registry and other manual operations. This is sometimes difficult for not very experienced users who started working with their PCs relatively recently. The probability of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for using a PC by separate accounts.

The disadvantages include the fact that some outdated models motherboards do not support launching from USB media. In such a situation, you have to look for some alternative options: floppy disk, CD, or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. There are many ways out of such a difficult situation; system reinstallation is not always required. Moreover, any computer owner who has minimal skills in interacting with this type of equipment can cope with resetting the OS access code.

We remind you that attempts to repeat the author's actions may lead to the loss of the warranty for the equipment and even to its failure. The material is provided for informational purposes only. If you are going to reproduce the steps described below, we strongly advise you to carefully read the article to the end at least once. 3DNews editors are not responsible for any possible consequences.

Windows has long used SAM to store and manage passwords for all users. All information in it is well protected, so in order to find out the password, you will have to spend a lot of time and resources, especially if it is complex enough. Most often, however, it is not at all required to find out the password - it is enough to reset it or change it. For this, several utilities have been developed, one of which we will use. Another important point - it is obvious that when the OS is running, it will not allow you to just break into the password store. Therefore, you need to make sure that your computer supports booting from CD / DVD or USB media in order to run the necessary utilities.

The most famous of them is the Offline NT Password and Registry editor, which can work with passwords and windows registry XP / Vista / 7. Download the USB or CD version of the utility, burn the downloaded image to a disc, or use our tips for creating a multiboot flash drive. The utility does not have a graphical interface, but you should not be intimidated by this - everything in it is quite simple and clear. In addition, often the desired option is offered by default, so you only need to press the Enter key.

Boot from removable media Offline NT Password and Registry editor. You hardly need additional options downloads, but in some cases you will have to empirically find those that will help the utility start. The next step is to select the number of the partition on which Windows is installed. You will have to navigate first of all by its size. In principle, until the very last moment, the program does not make any changes to Windows, so in case of an error, you can simply start the password reset procedure again.

Then the utility will ask for the path to the folder where the SAM files are located (in fact, this is a registry hive). By default it is X: / Windows / System32 / config, it is also offered at the beginning by the program. Then you need to select the first item (Password reset), since we are going to reset the password.

Then everything is simple. Select the first item (Edit user data and password) and enter the username or user ID in the format 0xabcdwhere abcd Is the RID listed in the first column. The RID is useful if the username is displayed incorrectly or you cannot enter it. For example, when using the Cyrillic alphabet.

It remains to specify item 1 (password reset) or 2 (password change) for the selected user. Exit the password editing mode by entering exclamation mark and hitting Enter.

Everything is almost ready. Introduce q, press Enter, and then agree to the changes by entering y and press Enter again. We refuse further work in the Offline NT Password and Registry editor ( n), remove the USB flash drive or CD and press the coveted Alt + Ctrl + Del combination to reboot. Done - password reset!

It was an easy way to reset your Windows 7 password. It shouldn't be too difficult. You just need to be careful and careful. Problems can only arise if there is no required drivers to work with a hard disk. Then you have to put them on a floppy disk (if, of course, you find a living representative of this almost extinct species and a working drive for it) or on a USB flash drive and at the first stage select the fetch additional drivers item.

For the second and third methods, you only need installation disk Windows 7 and nothing else. A more complex option involves the inclusion of the initially hidden account "Administrator" by editing the registry from the installation windows environment 7. In the future, it will be possible to enter the system under this account and edit any other account in the OS. By default, the "Administrator" does not have a password, which only plays into our hands.

So, we boot from the installation disk and press Shift + F10 to call the command line, where we drive regedit and press Enter to launch the Registry Editor.

Highlight the section HKEY_LOCAL_MACHINE, and in the menu select "File" → "Load hive ..." (File → Load hive ...). We need to open the SAM file, which is located in the folder \\ Windows \\ System32 \\ config on the partition where Windows 7 is installed. When you open, you will be prompted to enter the name of the bootable hive - drive in any.

Now you need to select the section HKEY_LOCAL_MACHINE \\ bust_name \\ SAM \\ Domains \\ Account \\ Users \\ 000001F4 and double click on the key F... The editor will open, in which you need to go to the first number in line 038 - this is 11. It must be changed to 10. Be careful and do not make a mistake - you only need to change it, without adding or removing other numbers!

Now we need to select our bush HKEY_LOCAL_MACHINE \\ bush_name \\ and in the menu select "File" → "Unload hive ..." (File → Unload hive ...), and then confirm the unloading of the hive.

That's it, you can reboot by pulling out the pre-installation disk and log into the system under an administrator account. In the panel windows management in the user management section, you can change the settings for another account. Including change your password.

There is one last way, the wrong one. Why wrong? Because we are going to replace system files, and this is an ignoble business. What is the main idea? It's simple - by default, the OS has the function of detecting sticky keys. You probably came across it at least once, and if not, then just quickly press Shift at least 5 times, and you will see such a wonderful window:

This window belongs to a small auxiliary program sethc.exe, which is located in the Windows system directory. Moreover, it starts even on the welcome screen when you are prompted to select a user and enter a password. But you can replace it with something useful. For instance, cmd.exe... Naturally, not directly in the running OS, but by booting from the installation windows disk 7 and pressing Shift + F10.

You need to start by determining the drive letter on which Windows is installed. The easiest is to just view the contents of the section root with the command dir... C: is likely to be seen as D: but not required.

Having decided on the volume letter, we perform two simple commands - copy the original file with one just in case sethc.exe to the root of the disk or wherever you want, and the second we change it to cmd.exe.

Copy d: \\ windows \\ system32 \\ sethc.exe d: \\ copy d: \\ windows \\ system32 \\ cmd.exe d: \\ windows \\ system32 \\ sethc.exe

Reboot, quickly press the Shift key (or Ctrl, or Alt) several times and observe the command line window. You need to enter one more command in it, substituting the name accordingly desired user and new Password... Other parameters of this command can be found in the official help.

Net user username new password

If you want to return everything to square one, then you need to boot from the installation disk again, open the console and run the command:

Copy d: \\ sethc.exe d: \\ windows \\ system32 \\ sethc.exe

However, you can not restore anything, but leave such a small trick in the system just in case. In addition to the methods listed above, there are many other methods for resetting or recovering a password in Windows, but we will not cover them for now. Once again, we urge our readers to be attentive and careful when working with the insides of the OS, and even better not to bring the situation to a "surgical" intervention in SAM. Successful recovery of access to your accounts!

Many home computers do not need a password to access the system. The password can be set as you wish or as required. The point is that for windows installation 7 supposedly it is necessary to enter a password, but in general this procedure can be skipped by clicking on the "Next" button.

How to remove password in Windows 7

It is a matter of a couple of minutes to cancel the password entry in Windows 7 at login. For this you need:

1. Log in with an administrator account. If there is only one account, then, in fact, it is the administrator.
2. Open "Control Panel".
3. Go to the User Accounts and Family Safety page if you have selected the default category display for tools. If you have selected large or small icons, you can go directly to the User Accounts page.
4. In the "User accounts" block, find and click on the link "Change Windows password".

In order not to go to the "Control Panel" and not search in it required pages, you can use search Windows... For this you need:

1. Click on the "Start" button.
2. Above the button, find a field for entering text.
3. Enter the word "password".
4. Find and click on "Change Windows password" in the search results.
5. Click on "Delete your password".
6. Enter the current password and click "Delete Password".

There is another way that does not require entering the old password. To use it to remove the password in Windows 7, you need:

1. Click on the "Start" button, and there - on the "Run" button. You can use the keyboard shortcut Win + R.
2. Enter "control userpasswords2" without quotes and click "OK".
3. Uncheck "Require username and password" and click "OK".
4. In the window that appears, do not enter anything and click "OK".

How to do it in others windows versionswritten in the article.

Choose a convenient method for yourself and remove the password. If you suddenly forget your password, because of which you cannot log in, it will be difficult to access it, especially for an inexperienced user.

Please note that you must use a local account to complete most of the instructions in this article. windows entry with administrator rights.

How to put a password on a Windows computer

If other people have access to your computer, it's wise to password protect Windows. This way your settings and data will be safe: without special knowledge, no one can view or change them. Windows will ask you for a password when you turn on your computer, when you change your account, or after waking up from sleep mode.

1. Open the section "Start" → "Settings" (the icon in the form of a gear) → "Accounts" → "Login Options".
2. Click Add under Password.
3. Fill in the fields as prompted by the system and click "Finish".

How to set a password on Windows 8.1, 8

1. In the right side panel, click Settings (the gear-shaped icon) → Change computer settings. In the menu of the window that opens, select "Accounts" (or "Users"), and then "Login Options".
2. Click on the "" button.
3. Fill in the fields, click Next and Finish.

How to set a password on Windows 7, Vista, XP

1. Open "Start" → "Control Panel" → "User Accounts".
2. Select the required account and click "Create password" or immediately click "Create password for your account".
3. Fill in the fields using the system prompts and click on the "Create password" button.

If outsiders do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password each time the system starts.

1. Use the keyboard shortcut Windows + R and type in the command line netplwiz (or control userpasswords2if the first command doesn't work). Hit Enter.
2. In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to the item "Require username and password to be entered". Click OK.
3. Enter the password, confirm it and click OK.

Windows will stop prompting for a password only when you turn on your computer. But if you lock the screen ( windows keys + L), log out or the computer enters sleep mode, the display will still ask for a password.

If the option "Require username and password" is unavailable or you want not to disable, but completely remove windows password, try another method for more advanced users.

To do this, open the Account Management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (login by email and password), disable it. Then use the system prompts to create a local profile, but leave the password fields blank in the process.

After disconnecting the account Microsoft system stop syncing your settings and files across computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password blank.

When you delete an old password, the system will never ask you for it until you add a new one.

How to remove a password when waking up from sleep mode

If you turn off the Windows startup password prompt, the system may still prompt you for it on wakeup. But you can deactivate this feature separately using these instructions.

1. In the search bar in Windows, enter "Power supply" and click on the link found to the section with the same name. Or find it manually through the "Control Panel".
2. Click "Prompt for a password on wakeup", then "Change settings that are currently unavailable" and check the box next to "Do not prompt for a password."
3. Save your changes.

How to remove password when waking up Windows XP

1. Open the section "Control Panel" → "Power Options".
2. In the window that appears, open the "Advanced" tab and uncheck the box next to the "Prompt for a password when exiting standby mode" item.
3. Save your changes.

If you've forgotten your password and can't log into your local Windows administrator profile, you don't need to reinstall the OS. There is an easier way out: reset password protection. To do this, you will need another computer, a USB stick and free utility to reset your password.

Create a bootable USB drive on another PC

1. Download the Lazesoft Recover My Password installer to any accessible computer.
2. Run the downloaded file and complete the installation.
3. Connect the USB flash drive to your computer. If necessary, make a copy of the files stored on it, as all information will have to be deleted.
4. Open Lazesoft Recover My Password, click Burn Bootable CD / USB Disk Now! and create bootable USB drive using the program prompts.

Boot your computer with a USB stick

1. Insert the prepared USB drive into the computer for which you forgot the password.
2. Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the hardware manufacturer. Most often, the required key is displayed on the screen during BIOS boot.
3. While in the BIOS menu, go to the Boot section if the system did not redirect you there right away.
4. In the Boot section, place the USB flash drive in the first place in the list of devices that appears on the screen. If you don't know how to do this, take a look around - there should be clues about management nearby.
5. Save your changes.

If the BIOS is also protected by a password that you do not know, then you cannot reset the password. windows protection with Lazesoft Recover My Password.

Perhaps instead of the classic BIOS, you will see a more modern graphical interface. Moreover, even in various old bIOS versions settings may vary. But in any case, the procedure will be approximately the same: go to the Boot boot menu, select the desired USB drive as the source and save the changes.

After that, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is written.

Reset your password in Lazesoft Recover My Password

1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
2. Reset your account password using Lazesoft Recover My Password hints.
3. Reboot.

After these steps, Windows will stop asking for the old password, and you can set a new one according to the instructions at the beginning of the article.

Passwords help protect your account on operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from the administrator's account, and there is no installation media with you. In this case, you will have to reset the password using slightly non-standard methods.

Remove password from Windows 7 without installation media

If you can't download a password reset disk on Windows 7, you can use one of the methods below. Both involve solving the problem with system utilities... You don't need to download a Windows 7 password reset disk or a complete system image to do this. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".

There is no need to try to reset Windows 7 password using third-party software, as this will entail certain problems.

Method 1: command line

It is the most versatile, simple and safe way change password on Windows 7 without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even if from a guest account. This is usually always the default.

The guest account has some limitations compared to the administrator account. By default, they apply to making any changes to the OS, for example, installing / removing programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.

The instructions for this method are as follows:

1. 1. Press the key combination Win + R.
   2. In the line that opens, enter cmd and click Enter.

1. 1. Will start "Command line"... First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the net user command and press Enter.

1. 1. A list of all operating system users is displayed. You need to find the login of the administrator account. This will be easy if the OS has only two accounts.
   2. Now write the command net user admin_name new_password. Example command: net user Admin 123456. Hit Enter.

1. After applying the command, restart the computer and log into the administrator account with the new password.

Method 2: recovery menu

This method can be dangerous, as it involves disconnecting the computer from the power supply during operation. However, a single application should not cause much harm.

The bottom line is as follows:

1. 1. Restart your computer if it was turned on, or turn it on if it was turned off.
   2. When will it start windows boot unplug it abruptly. For example, press the power button or pull out the power cable.
   3. Then reconnect the power and turn on the PC.
   4. Instead of the standard windows startup the screen should start "Windows Error Recovery", that is, recovering from an error.
   5. You will be presented with several options for starting the operating system. Please select "Launch Startup Repair"... In the Russian-language edition it may be called "Start Boot Repair".

1. 1. The system will boot up. You may see a window asking for permission to restore the system ( "System Restore"). Cancel by clicking on "Cancel".

1. 1. A recovery error message appears. Click on item "View problem details".

1. 1. Run text file with a description of the problem. Here you need to click on the item "File" at top menu... From the drop-down list, click on the item "Open".

1. Will open "Conductor" Windows with access to everyone system files... You need to navigate to the following path: C: \\ Windows \\ System32.
2. Find and rename one of these files here utilman.exe or sethc.exeby adding bak or old to the name of one of them. If these files are not displayed in the explorer, then in the column "File type" put value "All files".
3. Now find the file cmd.exe. Copy it and paste it in the same directory.
4. Rename the copied file to "Utilman" or "Sethc"... No need to rename the file to "Utilman"if at step 10 you added a postscript to the file "Sethc" and vice versa.
5. You can close "Notebook" and press "Finish"... The system will then reboot.
6. Wait for the startup windows screen and click on the icon "Special abilities"if renamed the file to "Utilman"... If you renamed it to "Sethc", then you need to press the key five times Shift.

This way you will have access to « Command line» without having any access to the system. In the interface "Consoles" you will have to do the following:

1. 1. If you do not know the exact name of the administrator account, then enter the command net user. It will display all the data regarding system users, including their status.

1. 1. Now write this command: net user Administrator record name new password. Example command, net user Admin 123456. Hit Enter.

1. Restart your computer and try logging in with the new password you set.

The above methods help to reset the password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and reset through it.