Installing Windows 7 gives an error. Windows won't install. Windows account errors, quotas, passwords, users

Often, novice users, to save time and money, do. A user who is doing the installation for the first time may encounter problems and may ask the question why Windows won't install?. Operating systems of the Windows family are very popular and now you need to know why they may not be installed.

Incorrect BIOS setting.

Any clean install Windows starts with preparing your computer. At this stage, when you try to install Windows from a disk or flash drive, problems appear and nothing is installed. For everything to work, you need to set the device that will read the Windows media to boot. For example, if the installation will be performed from a DVD/CD disc, then the first device to boot should be a DVD/CD drive with an optical drive (disk)
If you need it, then the first device to boot should be the flash drive itself, or rather USB HDD, USB Flash, USB Drive. Also in the BIOS there may be a signature based on the name of your flash drive or something similar, depending on the BIOS firmware version and the model of the computer's motherboard. Before saving the selected settings, you need to make sure that the floppy drive is disabled. You need to go to the “Standard CMOS Features” section, where you need to disable “Floppy - 1.44 or Drive A”. Next you need to save the settings, press F10 and YES. The computer will reboot and the system will begin installing Windows from the disk or flash drive.
Even when installing from a flash drive, problems may arise with the type of use hard drive. On modern computers The hard drive can operate in IDE AHCI and RAID modes. If you don’t have a raid array of disks, then let’s look at the remaining settings. You can find these settings in the IDE configuration section. I recommend using AHCI mode but when Windows installation With old flash drives, a message about the absence of a driver may appear. If you have this problem, try IDE mode and then the installation will proceed without errors. Learn more about BIOS settings.

A broken system image or damaged media.

Another persistent problem is the incorrect image capture from Windows. A bad disc (blank disc), a damaged DVD/CD drive through which Windows was recorded. The same can happen with a flash drive - bad memory or faulty USB ports on the mainland. It also happens that the equipment is in good working order and works correctly, but the image itself is damaged initially even before the moment of recording, for example, it was under-downloaded or was even damaged when uploaded to the site. In this case, you need to have several Windows images on hand, on different drives. You can try installing the operating system using another drive, for example an external one. Use different Windows installation methods and devices to achieve your goal of installing Windows by elimination.

The computer hardware is damaged.

Another problem is computer hardware failure. This could be a damaged motherboard, video card, hard drive, RAM, power supply, or processor.
It is necessary to carry out. Identify the damaged part and replace or repair it. There are many tests for this that do not require an OS. You can check the motherboard, processor and video card using the PC Test utility. Winchester can be checked HDD program Regenerator. RAM using the MemTest utility. The power supply can be checked through the BIOS or simply physically.

Outdated PC hardware

Here I think everything is clear if the computer hardware does not meet the minimum system requirements to install Windows, you will not be able to install it. For example, to install Windows 10, you must have at least 1GB on your computer RAM, hard disk space of at least 16GB, processor frequency must be at least 1 GHz. The video card must support DirectX 9.0c. It is clear that such a computer will not be able to provide comfortable work. Therefore for normal operation You need a multi-core processor with a frequency of more than 1.6 GHz and 2 GB of RAM. Sometimes all parameters may be suitable except the video or sound card. For example, many still have ATI Radeon x700 video cards with 256 or 512 MB of memory. It seems that the video cards are not very old. But they don't have DirectX 9.0c support. They support DirectX 9.0b but can no longer work on Windows 8, 8.1 and 10. Carefully review all the specifications of your computer before installing Windows to ensure it meets the system requirements. And if they are suitable, only then start the installation.

What else could be causing Windows to fail to install?

Old Motherboard BIOS boards or video cards. Update them.
Disconnected cable or power, check the connections of all cables and cables.
Conflicting parts – network cards, sound cards, TV tuners and the like.
Windows builds, many download operating system builds and try to install them. Such operating systems often simply cannot be installed on certain computers. Use pure original Windows images to install and then you should not have any problems.

Sometimes when installing Windows, including version 10, an error message is displayed on the screen. The text of the message is: “installing Windows on this disk impossible." In this case, the hard drive is displayed in the BIOS. It is also visible at the stage of installation of the operating system, where it could be divided into sections.

This problem occurs for two reasons:

• the controller is disabled in the BIOS (AHCI mode);
• The hard drive has a GPT volume.

Problem with AHCI mode

In addition to an error message informing that it is impossible to install Windows 7 or 10 on this disk, if there are difficulties with AHCI mode The computer cannot boot from the selected disk. The reason is that the controller may be disabled in the BIOS.

The problem is solved as follows:

Problem with GPT format

Another reason for the impossibility of installing Windows 7 or 10 versions with the display of a similar message may be the GPT format hard section disk.

Until recently, all hard drives were the same type. The only partition style was MBR. Over the past few years, manufacturers have been gradually switching to producing hard drives with the GPT format. But boot files with the OS are not modified for new formats, and as a result, the error described above appears during installation.

MBR (Master Boot Record) is program code and data required to pre-start the computer. They are located in the initial marked sector of the hard drive. The MBR starts after the initial BIOS analysis of the performance of all devices. Its main function is to determine the location of the files that are needed to boot the OS.

GPT new standard volume table placement format. A standard built-in interface was also developed software for computers, replacing BIOS. It is called UEFI (Unified Extensible Firmware Interface).

The problem occurs because the OS installer cannot install Windows on the specified partition due to the fact that the partition table does not suit it.

There are 2 methods to solve the problem:

• installing the system on a similar disk;
• Converting a partition to MBR.

The choice of method should be determined by the following rules:

• if your computer supports the UEFI interface and you need to install a 64-bit OS (for example, Windows 10), then it is recommended to use the first option. Checking the presence of a UEFI interface is very simple. Graphics mode with mouse control indicates the presence of UEFI;
• If the computer was manufactured several years ago, has a BIOS and requires installing a 32-bit operating system from MicroSoft, then you should convert GPT to MBR.

Using MBR limits some features, such as:

• their volume cannot exceed 4 TB;
• The maximum number of volumes on the HDD is limited to 4.

Installation of Windows 7, 8 and 10 on GPT

Problems when installing an OS on a GPT volume usually arise for those who want to install Windows 7, 8 and 10.

To install the OS on a GPT volume, you must meet 2 conditions:

• install a 64-bit system (for example, Windows 10);
• boot in EFI mode.

If the first condition is not met, what should be prepared bootable UEFI drive.

But in most cases, only the second condition is not met. Therefore, it is better to immediately go into the BIOS and check the settings.

There are two parameters to set in the BIOS:

• enable UEFI boot;
• switch the operating mode from SATA to AHCI.

After saving the settings, you can install the OS on your computer. The mistake will not happen again.

Converting GPT volumes to MBR

There are several options for converting volume style. Let's look at them in more detail.

Converting to MBR when installing Windows via the command line

This method is optimal for use in situations where installing an OS such as Windows 7, 8, 10 is not feasible due to the GPT volume type. It can also be useful not only when installing the OS, but also during the normal operation of the OS for converting non-system partitions.

It should be remembered that when converting partitions, all information from them will be lost. Therefore, it is recommended to save everything important in advance. external media information.

To change the style of volumes from GPT to MBR via the command line:

• run the command line in Windows as a user with administrator rights;
• to display the list hard drives connected to the computer, enter the commands “diskpart” and “list disk” in sequence;
• select the disk to change the style with the command “select disk D”, where D is the disk number;
  Then two scenarios are possible.
  1. execute complete cleaning disk with the “clean” command. In this case, all HDD volumes will be deleted;
  2. You can delete HDD volumes one at a time using the commands “detail disk”, “select volume” and “delete volume”;
• start converting the disk to MBR with the “convert mbr” command;
• exit Diskpart by selecting “Exit”. Close the command prompt. After this, it is recommended to continue installing the operating system. This error message will no longer appear.

You can create volumes on the HDD by selecting “ Set up disk».

The volume style change is complete.

Change partition style from GPT to MBR using Windows Disk Management

The alternative volume conversion method requires a properly functioning Windows 7, 8 or 10 operating system on personal computer. You can only convert a disk volume that is not a system one.

The sequence of steps to convert a HDD volume is as follows:

Utilities for changing partition style

In addition to the standard methods for converting HDD volumes provided by Microsoft developers, you can use third party utilities hard drive volume management, such as

Video on the topic

With installation Windows users encounter more often than we would like. Thus, the fact remains unchanged that various types of errors may occur, after which Windows 7 will not install.

We will not consider special cases of malfunctions, but rather their main types and methods of elimination. To structure the search, problems need to be broken down possible reasons into main categories, by going through them one by one you will find your problem.

So, why won't Windows 7 install? – there are quite a lot of problems, but we will highlight the main ones:

• The problem is in the Windows distribution itself, especially if it is a repack;
• Problem with installing Windows on a flash drive/disk, that is, some kind of failure in the boot record;
• The problem is in the flash drive/disk itself and the drive;
• Incorrect BIOS setup or its obsolescence.

So, in order to determine why Windows 7 won’t install, the error can be completely different (it’s better to look for it specifically in order to narrow down the reasons why the problem arose), you need to gradually go through each item, which is what we’ll do.

Faulty Windows distribution

The problem may occur if you booted Windows from outside. Since the “master” can be very different, you can expect any outcome. Although there is nothing left but to download the OS from another source.

A typical manifestation of such a problem is the presence of errors during installation, especially if it constantly occurs in a certain place. It may also be that the flash drive does not show the option to install Windows 7 at all, but this may not be the only reason.

To definitely not consider this option anymore, use the original disk or try loading a different image. Also check that you have installed it correctly.

Windows 7 cannot be installed from a flash drive/disk

Here you should make sure that the information on the media is correct. This problem is very common, as it occurs due to the use of defective or inappropriate programs to create an installation flash drive. You need to use another application, here are the ones that should work: WinSetupFromUSB or UltraISO.

Usually, if there were any failures during the recording process, then you will not see the flash drive at all as a launch medium or various errors will arise during the process: the absence or malfunction of some files.

The same applies to a DVD that was not recorded correctly or that errors occurred during the burning process. Here you should burn the disc again, only using the minimum speed, because this prevents many problems.

Windows 7 won't install - faulty media

The problem is relevant for both DVD disc(more often) and flash drive (less often). This usually means that the disc is too scratched or not recorded properly, or there may be some mechanical damage. The situation is similar with a flash drive, check its functionality on another computer, in particular, try writing/copying several files. Using a standard check (RMB-Properties-Service-Check Disk), make sure that it is working properly.

Also try, in the case of a flash drive, use the rear USB connectors since they have direct access to motherboard, those on the front side use an extension cord, which can cause problems.

When using a disk, you should be sure that the disk drive itself is working properly, since in a situation where the laser loses power, there may be failures in reading information, and this will lead to an error.

These problems are characterized by a situation where they are not displayed at all in Windows or failures constantly occur in a random place (in the case of a disk drive).

Why won't Windows 7 install? BIOS problem

The first reason is outdated BIOS. Thus, it has lost its relevance and can no longer perform some modern challenges, for example: older versions do not support large volumes of media. It is better to update the BIOS or you can use stripped-down media or Windows.

At using USB 3.0 there may be problems when they are not installed Windows drivers 7 as it is not generally designed to use this standard. A problem occurs when installing the original version. A solution can be found if you use additional drivers or third-party OS assemblies. You can also physically switch the drive to a connector with USB 2.0 or disable USB XHCI Controller in the BIOS, and for external HDDs - AHCI.

Also, if Windows 7 is not installed on a laptop, then you should disable the Secure Boot option, which is used mainly in Acer and Asus, but often works in others.

So, we found out what to do, Windows 7 won’t install technical reasons, but it’s also worth mentioning that sometimes protection against installation of a system other than the preinstalled one is simply turned on.

We have figured out what to do if Windows 7 is not installed on your computer, so even if you have not yet encountered such a need, you will be ready to identify and fix the problem at any time.

If you still have questions on the topic “Windows 7 won’t install: how to fix the main errors?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

operating room Windows system It is considered fully automated, but most users encounter situations in which Windows 7 generates an error during the installation process.

It is worth noting that this state of affairs is observed not only during hard formatting disk, but also when the installation process is already running.

In what cases does Windows 7 display error 0x80070017 during installation?

It is worth immediately noting that operating system Windows 7 in various versions and assemblies is universal, however, when installing it, most users may encounter various difficulties. Compared to the XP version, the presence of genuine media with the installer and all necessary drivers is not able to guarantee the successful installation of Windows 7. The thing is that in this case certain settings are initially provided. If they are absent, the operating system will not install on the hard drive. If during the installation process Windows 7 gives an error, you should find the reason for this. This will be discussed further.

Troubles with reading information from optical media

It is already known that installation disk placed on an optical distribution in the form of a DVD media. It is worth noting right away to avoid inaccuracies that it does not fit on an ordinary CD. Therefore, if you come across such media, all that remains is to throw it away, since it is devoid of most components, including the driver database. If during the installation process Windows 7 gives an error, you must immediately pay attention to the condition of the disk. It may have scratches, cracks, or other consequences of mechanical damage that make it impossible to recognize the installation files.

The problem may also arise due to problems with the drive itself. If it does not recognize the disk or an error is displayed during installation, the read head is most likely damaged. It is worth noting that drivers do not always work correctly. What to do in such cases? Everything is quite simple. You will need to replace the drive or create a bootable flash drive. You can also try installing from it. Today there are a large number of programs for installation USB media.

Hard drive operating modes

Sometimes situations are possible when problems also occur with an undamaged disk. various problems with the installation of Windows 7. As a result, the operating system generates an error even at the stage of formatting or copying information. This is due to the fact that during installation it is impossible to gain access to the hard drive. In this situation, you need to try to enter the BIOS and change the operating mode of the SATA controller. That is, switch it from AHCI to IDE. It also happens that the process is relatively successful, but an error is displayed when installing Windows 7.

It may occur due to incorrect boot records. There is no need to waste time and delve into all the details. It is simply necessary to note that it is recommended that during the installation process you perform a bootloader recovery using the combination bootrec /fixmbr, which must be entered in command line. It opens by pressing the Shift + F10 key combination.

Update errors

When it comes to updating, things get a little worse. In this case, you have several options. One of them is to disable automatic updates completely, which can be done in the Update Center. There are also more effective way. To complete this you will need the following steps:

1. Open “All Programs”.
2. Go to the “Standard” section.
3. Enter the following combinations on the command line: first net stop wuauserv, then CD %systemroot%\SoftwareDistribution, then Ren Download Download.old and finally net start wuauserv.

After performing these steps, the update usually occurs without problems.

In the end, it is worth noting that during the installation process, Windows 7 may give an error not only for the reasons described above. In fact, there are many reasons for such failures. Perhaps during the installation process it is necessary not only to install the system, but also to additionally download and install device drivers.

As a rule, this refers to a fully Russified version, which is easy to find in a form where you do not need to enter license codes and subsequent activation. One way or another, there can be many problems, but the solution is always somewhere on the surface. True, not everyone realizes this. The article helps to understand the problem in which the Windows operating system, version seven, gives an error during installation. Perhaps it will be useful for someone.

Although it is believed that the installation of Windows OS is completely automated, unfortunately, many users are faced with situations where they receive an error when installing Windows 7. The saddest thing is that this can be observed both during a logical partition and during an already running installation process.

Why does it give me error 0x80070017 when installing Windows 7?

Let's say right away that Windows 7 OS different versions and assemblies, although it is universal, so to speak, “tailored” to the classics, nevertheless, when installing it, many users encounter various difficulties.

Unlike the same version of XP, even the presence of the original disk with the installer and all drivers does not guarantee the successful installation of the “seven” on a computer or laptop. The fact is that the installer initially contains some settings, without which the operating system simply will not install on the hard drive. When installing Windows 7, it often gives an error even at the initial stage. Why - we will now try to figure it out.

Problems reading data from optical discs

As has already become clear, we will assume that the installation distribution is located on optical media in the form of a DVD. Let’s make a reservation right away: it won’t fit on a regular CD, so if you come across such a disc, you can safely throw it away. It will be missing many components, at least the driver base for sure.

However, returning to the question of why Windows 7 gives an error when installing, you should immediately look at the condition of the disk. Who knows, maybe there are scratches or cracks on it, making it impossible to read the installation files.

On the other hand, the problem may lie in the drive itself (DVD-ROM drive). If for some reason it does not accept the disk or an error occurs during the installation process, it is very likely that the reading head is damaged. And drivers may not always work correctly.

What to do? It's simple: either replace the drive, or create a bootable flash drive and try to install from it. Today there are plenty of programs for creating installation USB media.

Hard drive operating modes

However, even in a situation with undamaged media, a situation may also occur when, when installing Windows 7, it gives an error at the stage of formatting or copying data.

This is also due, in relation to Windows 7, to the fact that the installation process itself cannot gain correct access to the hard drive. In this case, you will need to enter the BIOS and switch the operating mode of the SATA controller from AHCI to IDE.

In some situations, when the installation is more or less successful, the problem that Windows 7 installs an error may be due to the presence of incorrect boot entries. We will not delve into the subtleties. But we can advise you to use bootloader recovery during installation by using the combination bootrec / fixmbr on the command line called by the combination Shift keys+ F10.

Update errors

With updates, the situation is somewhat worse. Even in this case, when installing Windows 7, it gives an error.

Here you can do things differently: either disable automatic updates altogether in the “Update Center” (standard “Control Panel”), or there is a more effective method. It consists of entering the following commands in the command line, called either from the main menu in the “All Programs” / “Standard” sections, from the “Run” menu by entering the abbreviation cmd, or from Windows on the original disk (which is preferable) : first net stop wuauserv, then CD %systemroot%\SoftwareDistribution, then Ren Download Download.old and finally net start wuauserv. After this, the update should occur without problems.

Bottom line

In conclusion, it is worth saying that when installing Windows 7, it gives an error not only in the situations described above. There can be quite a lot of problems. In the installation process itself, you need not only to install the system, but also, as practice shows, to additionally download and install drivers for all devices. In particular, this applies to the maximum Russified version, which can be found, so to speak, in a “cracked” form without entering license codes and subsequent activation.