Mms does not work. How to set up MMS on MTS: manual and automatic configuration. Checking iPhone settings - are MMS enabled there

Subscribers mobile operator Tele2 have the ability to exchange multimedia messages, provided that the service of sending and receiving MMS is activated on their number. To activate this function, you must enter the appropriate settings for MMS messages from the Tele2 service provider into the mobile device.

Multimedia messages

MMS service allows subscribers to send and receive messages containing attachments in the form of photos, audio recordings and videos. As a rule, modern smartphones and phones are designed in such a way that they are able to automatically compress the dimensions themselves. transferred filesand successfully send multimedia messages despite some network restrictions on their size.

For the successful sending and receiving of MMS messages, it is necessary that the sending and receiving devices have the required function and be configured in accordance with the parameters set by the Tele2 service provider.

Some models of smartphones and tablet PCs are capable of making the necessary parameters and settings by yourself in automatic mode... You just need to insert the SIM card of the Tele2 operator, and after a while you will receive SMS messages with all the necessary settings and instructions. All you need to do is agree with their acceptance.

However, if you are unlucky, and your device could not do it without your participation, do not be discouraged. Just help him by writing the necessary options manually.

Regardless of how your device was configured - manually or automatically, the new parameters for sending MMC messages will take effect only after the device is rebooted.

Request for automatic parameters

If, after turning on the Tele2 SIM card, SMS messages with automatic settings for your phone model have not been received on your device, you can always request them. This can be done in one of the following ways:

• Make a call to short number 679.
• Order settings in personal account.

After your application has been processed, you will receive an SMS message with the required phone settings. Agree to their acceptance, and then restart the device.

Entering the parameters manually

Those who, for some reason, failed to set the settings automatically, will have to register the parameters manually. All operations, regardless of device and operating systeminstalled in it are done in section "Settings".

The standard parameters for activating the option of receiving and sending MMS messages from the Tele2 operator are as follows:

• enter the profile name in the line - Tele2 MMS;
• choose the channel for data transmission - GPRS;
• write home page address like this -;
• the access point line looks like this - tele2.ru;
• port number: 8080 (or 9201 for WAP 1.x phones);
• enter the numbers in the IP-address line: 12.40.65.

Lines requiring a password and username should be left blank.

These are standard mMS parameters- messages. However, when setting up a specific device, the user may have questions. This happens because mobile devices work on the basis of different operating systems, and some nuances should be taken into account when making parameters.

Android

In devices operating on the basis of Android, in order to register a new access point, you should follow the path: Phone menu - Settings - More - Access points (APN). Then call the additional menu and enable the option to create a new access point. In the window that opens, enter the standard parameters in the corresponding lines.

iOS

In devices with an operating iOS system follow the path: Menu - Settings - cellular - Cellular data transmission network. Next, fill in only three lines to configure MMC:

• APN: tele2.ru;
• in the MMSC field put:;
• in the line of the MMS proxy write: 12.40.65: 8080.

Leave all other lines blank.

Windows

The peculiarity of configuring devices running on Windows is that, among other parameters, you will need to put IPv4 in the "Network type" line, and "No" in the "Authentication type" line.

You can find out more detailed information on setting up a specific version of any of the operating systems on the official website of the Tele2 mobile operator.

Please note that after setting the MMS parameters, you need to send a multimedia message to any of the Tele2 subscribers.

This is done so that the communication system "sees" that your device has access to this function. Otherwise, you will not be able to receive the MMS messages sent to you, but you will see only a link leading to the MMS gallery page and a password for viewing it.

If it so happened that you followed all the recommendations and registered all the necessary data, and the MMS service still remained unavailable, do not despair. First, check again if you made a mistake somewhere when entering the settings. Correct it and don't forget reboot device.

But even if this did not help, remember that you can always turn to the Tele2 specialists for help at the nearest office or communication salon, where you will definitely receive qualified assistance on any issue of interest to you regarding the communication and services provided by Tele2.

To send to someone sound file, photo or video, optional email - it is enough to use the MMS sending service. This service is used by a limited number of subscribers, but sometimes it is the only way to deliver multimedia information. For example, sending MMS is useful if the recipient does not have any tools to communicate with the outside world, except simple phone with MMS support. How to send MMS from MTS, how to set up the phone to receive multimedia messaginghow to send a message for free - our review will tell you about everything.

How to connect MMS to MTS

In order to connect MMS to MTS, you do not need to take any action - in most cases this service is activated by default... If for some reason this is not the case, you should look into your Personal Account and connect the Mobile Internet service there (MMS works through data transfer services). If there is no access to the Internet, the service can be activated using the USSD command * 111 * 18 # or by sending SMS with the text 2122 to the short service number 111.

There are no subscription fees and fees for connecting to the "Mobile Internet" service. You can then set up your mobile phone and start messaging. The cost of sending MMS to MTS depends on the subscriber's tariff plan. To reduce the cost of MMS-exchange, an MMS package of 10 messages is provided for 35 rubles for 30 days.

How to set up MMS on MTS

In order to receive and send MMS messages, the subscriber needs a configured phone. More often settings are set automatically, immediately after inserting a SIM card into the phone. If this is not the case, you need order automatic settings by sending an empty SMS to the service number 1234 (or call toll free number 0876). After saving the settings and restarting the phone, you need to send a test MMS to 8890 (free of charge) - the network will understand that the phone is set up and can normally receive multimedia messages.

Otherwise, all received messages will be sent to the MMS-portal of MTS, and the recipient will receive SMS-notifications with links to view MMS on the portal. If automatic settings for some reason do not come or are not installed, you should register them manually. How to do this depends on specific model phone. The subscriber should go to the Internet access settings section and create there profile with the following parameters (sometimes the MMS profile setting can be found in the MMS settings section):

• Profile name - MMS MTS (or something else);
• Home page - http: // mmsc;
• Data channel - GPRS;
• Access point - mms.mts.ru (without http: //);
• IP address (proxy address) - 192.168.192.192;
• Proxy port - 9201 for old phones, 8080 for new phones;
• Username and password - mts.

The parameter names may differ depending on the phone model. Parameters not listed in the overview should be left as they are. After entering the parameters, select the specified profile in the MMS settings, reboot and send a test MMS to the service number 8890.

How to send MMS to MTS from your phone

To send MMS from your mobile phone, need go to the section with messages and select the item for sending messages there (“Send MMS” or just “Send message”, “New message”, etc., depending on the device model). Add to the message required files... The maximum size of MMS is 300 kb, and phones that are too large can be scaled to the required size independently.

Next, select the recipient or type in his number manually, then press the send button - after a few seconds (depending on the connection speed) MMS will be sent to the recipient. The recipient's number must start with +7 - this is a prerequisite for sending MMS messages.

How to send MMS to MTS for free

Send MMS to MTS for free will help official website of MTS - there is a corresponding form for this. Fill in the recipient and sender numbers, enter the title and text of the message (up to 1000 characters), add files or select a picture from the proposed gallery, and then click on the send button. The sender's phone number is indicated to protect recipients from MMS spam - a confirmation SMS will be sent to the specified number. In addition, in the form of sending MMS you will need to go through additional antispam. Service limitations:

• Message size - no more than 300 Kb;
• Text size - no more than 1000 characters;
• Sending MMS from one IP - 1 MMS from 1 IP in two minutes;
• Sending MMS to the same number - once every 2 minutes.

If the recipient of the MMS has activated the service "Call barring informational SMS and SMS / MMS from the MTS website ”, the message will not reach such a recipient.

How to watch MMS on MTS

In order to view the MMS content, you need to extract it by clicking on the corresponding menu item. If the phone is configured to automatically receive MMS, then you just need to open the delivered message... If the recipient's phone is not able to receive MMS, then the messages will be available from the pages of the MMS-portal, which was already mentioned in our review - follow the link indicated in the SMS notification, enter the password and view the contents of the received message.

The article describes how to configure MMC for the Android operating system.

Navigation

The ability to send MMS from certain mobile devices is no longer some kind of special technical service provided for a lot of money. MMS can be sent with the same simplicity as SMS, but for this, of course, your gadget must be configured accordingly. IN this review we will discuss how to configure a mobile device running an operating system “ Android”To send MMS messages.

How to set up a gadget running “Android” to send MMS?

First, let's figure out what configuration methods we have to send MMS to “ Android”:

1. Automatic tuning
2. Setting up by calling a specialist
3. Manual setting
4. Configuration using a computer and the Internet

I would like to add that the very need to configure MMS to “ Android”, As a rule, occurs in the following cases:

1. Factory settings have been reset
2. A new gadget was purchased

How to configure a gadget running “Android” to send MMS using automatic settings?

The easiest method for setting up MMS to “ Android”Is of course automatic setting... That is, in this case, we need to perform a minimum of actions, the rest will be done by the system “ Android”Yourself. But this method of settings works the first time your gadget is registered in the network of any mobile operator.

How to set up MMS on Android?

You need to take the following steps:

1. Install a SIM card in the gadget
2. Turn on the gadget (if you need a pin code, then enter it), wait until the registration process is completed, and an SMS with the settings will be sent to your mobile device
3. After receiving the settings for your gadget, you will need to accept and save them. After restarting the gadget, your mobile device is running “ Android”Will be ready to work with MMS

How to set up a gadget running “Android” to send MMS by calling a specialist?

You can contact a specialist for MMC settings on your gadget for help every time you need it. True, you already have to take more actions than in the previous method.

To set the MMS to “ Android”With the help of a specialist, you need to call your mobile operator:

• « Megaphone"- to the number 0550
• « MTS"- to the number 8900
• « Beeline"- to the number 0611
• « Tele 2"- to the number 611

After the call, we will go to the voice menu (applies to all mobile operators) and follow the instructions of the answering machine. Then we will be contacted by a specialist of the company we have chosen, who needs to read out his passport data to identify our person. After that, the specialist will send the tinctures to our phone. Next, you should proceed as in the previous case - accept and save the settings, and also restart the gadget. In some cases, you will need to call the specialist again and ask him to activate the settings on his SIM card.

How to set up a gadget running “Android” to send MMS manually?

If you purchased your gadget a long time ago, and also cannot get through to a specialist, then you need to set up MMS to “ Android”Manually.

For this you need:

1. Go to the gadget menu
2. Then go to « Settings»
3. Then go to the item " Networks" or " More"Depending on the model of the gadget
4. Then you need to click on " Mobile networks»
5. Go to " Access points"And choose" Mobile data»
6. Then choose “ Internet access points"And click on" New access point»

Then you have to enter certain data, which may differ for each mobile operator. The table below shows which data should be entered in each specific case:

Enter the specified data, save the settings and reboot the gadget. Now your mobile device is on “ Android”Ready to work with MMS.

How to set up a gadget running "Android" to send MMS using a computer and the Internet?

If you don't want to dig into your phone, then set up MMS to “ Android”Is possible with a computer connected to the Internet. To do this, we need to go to the website of our mobile operator and select the appropriate section.

In this review, we have laid out all possible ways MMC settings on your gadget running “ Android”. If the listed methods do not work, then you did something wrong.

Video: Internet and MMS settings for Android phones

If MMS messages are not opening or sending on Android, the first step is to check the APN settings. The configuration is sent by the operator when the phone is switched on for the first time with a new SIM card. However, the settings may crash or turn out to be incorrect after changing the SIM card.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Reasons why MMS do not reach / come on Android

The main cause of problems with MMS is incorrect setting of parameters in the system. This is true for both the sending side and the receiving side. But there may be other reasons:

• The phone does not support the message format sent by another user.
• The size of the MMS is larger than the free space in the smartphone's memory.
• The function is disabled or is not supported in the tariff plan.

First you need to check the MMS settings on your phone, and if they turn out to be correct, then the next step is to call the operator's support service.

Setting up MMS reception for Android

Any operator, be it a long-running MTS or a relatively new Yota, sends Internet and MMS settings when the SIM card is first inserted into the phone. But some users ignore the configuration message and do not save the parameters. As a result, attempts to use mobile traffic to access the Internet or send / receive MMS fail - Android does not understand what data to use to complete the task.

Therefore, in order to understand why MMS is not loaded on Android, you need to make sure that the necessary parameters are added to the system. Each operator has its own identification data, but the procedure for setting up the Internet and MMS is the same for everyone.

Automatic tuning

If you did not receive configuration messages or simply deleted it, do not know where the MMC and Internet settings are stored, then use the option to order parameters from the operator. Each provider has special number to call or send SMS with a specific text. Example for Russian Federation:

• МТС - call to 0876 or empty SMS to 1234. You can order separately MMS settings by sending "MMS" to 1234.
• Beeline - command * 110 * 181 # or call 060432.
• Tele2 - call 679.
• Megaphone - send "3" to number 5049.

In addition, each operator on the official website has a subscriber's personal account, through which you can manage services, including ordering Internet and MMS settings. Authorization in your personal account is carried out using the phone number and password received in the SMS.

Manual MMS configuration

If automatic configuration does not work (the operator does not send the settings, or they are not saved in the phone), add the parameters manually. You can view them on the mobile provider's website in the "Help and Support" section. To execute manual setting, you need to know where MMS parameters are stored in Android. Will help following instruction:

1. Open your phone settings and go to the "Data transfer" section.
2. Enable mobile data by sliding the switch to the active position.
3. Return to the settings menu. Open the "More" section.
4. Go to "Mobile networks" and select "APN access points".
5. Call the additional menu and select adding a new point.

Depending on the model of your smartphone, the item names may differ slightly, which is due to the Android shell of your smartphone manufacturer.

The APN setup menu will appear, in which you must specify the MMC parameters provided by the operator. They are the same for everyone android versions... For example, to set up MMS on Tele2, you must fill in the following fields:

1. Name - Tele2 MMS.
2. APN - mms.tele2.ru.
3. MMSC - http://mmsc.tele2.ru.
4. Proxy - 193.12.40.65.
5. Port - 8080.
6. Authentication is not.
7. APN type - mms.

After entering the connection parameters, save the configuration, restart your smartphone and try sending MMS or ask a friend to send you a photo message. To set up MMS for other operators, use the table below or find the parameters on the official websites of mobile providers.

Articles and Life Hacks

What is setting mms on android? Today, such a service is no longer something new, but it continues to be one of the most convenient, given that you can transfer various files via MMS, including photos and images. Many users specifically choose those cellular operators that provide packaged MMS messages. For example, the MTS company offers its subscribers packages for 10.20 or 50 messages, the MMS + service (messages with a discount), as well as special tariff planswhere unlimited MMS messages are valid. There's even a free MMS Show! And without the help of specialists.

Preparing MMS settings for Android

Reasons not correct work MMS, as always, are banal (but these are definitely not problems with, which apple often have). And the first is the absence of such settings on the device at all. This means they must be ordered from your mobile operator. After they are sent to your phone, you need to save them.

Smartphones of the new generation, upon first launch, together with a SIM card, themselves identify the Internet and MMS settings. However, this only applies to those SIM cards that already contain such information.

How to set up MMS yourself? For this function to work correctly, after saving the settings, the mobile device must create 2 points, having received data via the GSM network or from the SIM card - the point for transmitting MMS messages and the Internet access point. If the SIM card is already many years old, it is unlikely that the phone will be able to independently identify itself in the network. cellular operator... How to be in this case?

Instructions for setting up MMS on Android

How does setting up mms on android begin? First you should go to "Settings" mobile device, item "More". IN different models phones, the item can be called differently - for example, "Communication settings" or analogs of such a phrase. Then you should select the option “ Mobile network»And click on it, after which the user will see the settings that are associated with his cellular operator.

The next item he needs is "Access points" ("Access points", "APN", etc.). Here you need to create a new access point specifically for MMS. To do this, click on the auxiliary menu and select "New access point" ("Create APN"). Most likely, there will be no access point, but if it already exists, but MMS messages are still not sent, you will need to delete it and create a new one.

For a new access point, you need a certain list of parameters, which you can find out from your mobile operator. For example, for Beeline subscribers, they look like this: MMSC - http: // mms /, Proxy - 192.168.094.023: 8080, APN - mms.beeline.ru, Username - beeline, Password - beeline. So, it remains to enter the correct parameters.