The left earpods are not working properly. Why does one earphone not work and how to fix it? AirPods problems - won't connect to Mac

Break down. Moreover, users cannot even understand what is the reason for this breakdown. These and not only problems will be discussed further.

It is worth noting that currently there are a huge number of different companies that are engaged in the production and sale of headphones. However, it is certainly impossible to call all these companies reliable, as in all industries, there are the best and the worst among them.

If we are talking about quality headphones, then, first of all, we mean fairly well-known companies. The EarPods are among the best of their kind. The fact is that the quality of their almost perfect sound attracts buyers from all over the world. However, like any other technology, these headphones have problems.

What if the EarPods are playing quietly?

There are many reasons why headphones begin to reproduce sounds poorly. However, the most common are:

• manufacturing defects;
• mechanical damage;
• incorrect setting.

If we talk about the first two cases, then there are only two ways to solve the problem:

1. The first way is to contact a specialized service company for help.
2. The second is to get new headphones.

Of course, you can also try to disassemble the headphones and fix them yourself, but this usually does not work.

Photo: Disassembled EarPods

As for the problem of connecting headphones, here you will need to go to the settings of your device and make sure that it sees the headphones. If this does not happen, then most likely your operating system simply does not support this device.

Among other things, there are quite often problems with the connector.

Right or left EarPods not working?

This problem is widespread not only in our country, but throughout the world. In fact, the problem is solved simply, unless it is a factory defect. Solution ways:

• You need to switch to mono audio mode. The fact is that almost all sound files on the iPhone are played in stereo. Thus, one of the musical instruments will play in the right earpiece and the other in the left. In order to switch to stereo mode, you need to go to settings, then to universal access and select the required action there.

• The first option is effective, however, it does not always help. A sound problem may occur due to a malfunctioning connector on the device. In order to find out that the reason is in the jack, you need to connect other headphones and try to listen to music. If the problem persists, you will have to contact the service center for help.

What if the EarPods microphone is not working?

As for the microphone, it fails less often than headphones. This is due to the fact that the microphone is used much less intensively. If your microphone stops working, there are several reasons for the breakdown:

1. You need to check if the headphone output is working. All you need to do is turn on the music and listen. In the event that the sound will go, you need to look for the source of the problem in another.
2. The most obvious and popular reasons for a microphone breakdown are factory defects and mechanical damage. In such cases, you will need to contact the service company.
3. Check your phone settings. It is possible that your microphone is simply muted. This can be done with the Mute button. The problem is solved by pressing the button again.

Buttons not working on EarPods?

It is worth noting that such problems arise very often and they are associated with a rather commonplace reason. Headphones almost always conflict with non-Apple technology. Sometimes they just refuse to work on other smartphones and computers.

Decide this problem, alas, it won't work, you just have to switch to smartphones from Apple or buy other headphones.

There are several other reasons why buttons may not work:

• If you have a technique from Apple, but the buttons do not "obey" the first time, then try several times to press the desired button with a little effort. Sometimes it happens that the buttons get stuck and stop responding to commands.
• Another cause of breakdown can be a factory defect. Certainly original headphones, which have a lot of differences from fake ones, are practically not subject to such a problem, but this should not be completely ruled out.
• Mechanical damage can be another cause of breakdown. In this case, you can contact the workshop for help or simply buy new headphones.

Now you know how to fix EarPods when you have problems using them. Most importantly, remember that you should only buy proven original equipment, only in this case you will receive a quality product. Try to use the headset correctly and do not try to fix the breakdown yourself without the proper skills, this can lead to even greater problems.

Hello everyone! In the iPhone 7, Apple removed the 3.5mm headphone jack and, most likely, will not revert to this outdated (in its opinion, arguable) interface in all subsequent models of its mobile devices... This means that, willy-nilly, Lighting-headphones (or special adapters) will gain popularity. You just can't get away from this - you want to listen to music.

No, of course there are also Bluetooth "ears", but they have a couple of significant drawbacks. First, they don't come with the iPhone. Secondly, the price. Therefore, congratulations to all of us - the era of a new interface has come. But along with this "wonderful" event, as usual, problems come - where can we go without them? The fact is that in some iPhone cases it may either not see the Lighting-headphones at all, or they will simply turn off after some time, and on the screen the user will see the inscription “the product is not supported”.

Why is this happening? Let's figure it out now, let's go!

In addition to headphones, the article should also consider adapters with Lighting to 3.5 mm. Indeed, in essence, it is practically the same thing. Their input is the same, but only the output will differ - either two ears or a 3.5 mm interface.

Probably, it is worth starting with "global" problems and listing the reasons why the headphones in the iPhone do not work at all:

But do not immediately run to the workshop, because there is another reason for the inoperability of the "ears" and it, in my opinion, is the most common. True, most often she has slightly different symptoms ...

Let's imagine that the headphones still work through the adapter. However, they do it in a strange way ... after a while they turn off (an inscription is displayed on the screen - the accessory is not supported), and the sound starts being output to the speakers. Moreover, if you pull them out and insert them, then nothing changes. Saves for a short while, but after a couple of songs, the shutdown is repeated. What is the reason?

It is worth noting the main thing: it's not about the software - flashing, resetting settings and other manipulations will not help.

It's simple - the problem lies in the Lighting headphones and adapters themselves, since such problems occur only with non-certified accessories. "The Chinese do not sleep" and the market is simply overwhelmed with non-original products.

Moreover, sometimes it is very difficult to distinguish them visually - they look exactly like real Apple accessories. But there is one trick here, which they have not yet learned to fake - just connect the adapter to the Lighting connector of the iPhone, look at the screen and ... in the pop-up window it may be written:

Only the last inscription indicates that you are using a certified accessory. Everything else may indicate that the adapter is not original, which means you need to prepare for poor sound quality, periodic shutdowns and other "joys".

Why is this happening? The fact is that Apple uses a special chip in its Lighting accessories, which ensures full compatibility and high-quality work with iOS devices. And so far, apparently, it has not been possible to forge it.

Conclusion: stock up on money and go to the store for "real" headphones (adapters) with a Lighting connector. Everything that can be ordered in China (costing 100 rubles per kilogram) either will not work immediately, or after the next iOS updates... At least this is the situation at the moment.

P.S. What do you think about such "protection" - is it good or bad? Write your opinion in the comments, ask questions, click on the buttons social networks! Too lazy to comment? No problem! You can just like it :)

1. Check for debris in the headphone port on your iPhone, iPad, or iPod touch.
2. Check the headphone cable, jack, remote control and earbuds for damage such as wear or breakage.
3. Inspect the mesh of each earbud for debris. To remove debris, gently brush all holes with a clean, dry soft brush.
4. Connect the headphones securely to the device. If your iOS device is protected by a case, remove it to ensure a secure connection.

If the problem with the headphones is not resolved, follow the steps below.

In almost every case, the equipment itself is damaged. If something is placed in the headphone jack, removal can be attempted by several different ways... Most often, these problems occur in the hardware itself. Typically, something is interfering with the headphone jack, triggering a sensor, or the headphone jack itself is inoperative. If the headphone jack is broken, there is very little the owner can do other than replace the phone. If something needs to be knocked out, on the contrary, there are a number of useful methods for removing the obstruction.

If you don't hear any sounds or only the left or right earbud is working

1. Adjust the volume using the volume buttons on your iOS device or use the Volume slider on.
2. Try connecting a second pair of headphones to see if replacement is required. If the second pair works, contact the manufacturer of the first pair to find out if you need a replacement. If the second pair doesn't work,.

If the device does not exit headphone mode

If the headphones are disconnected from the iOS device and the Headphones volume indicator continues to display on the screen, see.

Headphone jack problems

Almost every headphone jack problem is a problem hardware... When the process is complete, users just need to press the power button again. The headphone jack can be checked by looking through the hole with a flashlight. Those who check for hardware failure should carefully inspect the headphone jack for debris. Such debris may include food, dirt, or a broken part of the headphones. Be careful when trying to remove debris from the headphone jack.

If the microphone doesn't work

1. Make sure the headphones have a built-in microphone.
2. Check if the microphone is blocked by small debris, lint or plastic wrap.
3. Try connecting a second pair of headphones to see if replacement is required. If the second pair works, contact the manufacturer of the first pair to find out if you need a replacement. If the second pair of headphones doesn't work,.

If the remote control still does not work, contact

If the buttons on the Apple EarPods do not work

Such efforts can inadvertently exacerbate the problem. If the obstructing element cannot be removed, it may have to replace the phone, so it is often better to try to remove it than just replace the phone. However, if the owner of the phone is willing to take the risk, there are several methods you can try. This will destroy the feather in the process.

One attempts this cleaning method by inserting the cartridge into the headphone jack, twisting the cartridge back and forth, trying to dislodge any debris, and then shaking the phone until the debris is gone. Users should not push too hard or penetrate too deep into the headphone jack, otherwise it may cause further damage. Instead, users should try a different repair method.

Ruler iPhone smartphones includes several generations of high-tech functional devices designed for comfort and versatility in use. But the special approach of the developers to the creation does not at all guarantee that the devices will last forever without any breakdowns and failures. For example, the specialists of the Ay-Yai-Yai service quite often face a problem when the "Headphones" mode is turned on in the iPhone without headphones. And this problem can bring a lot of unpleasant moments to the owner and his interlocutors.

You can also use a can of compressed air to clean a broken headphone jack. This will often work like a magic fix, even if nothing is blocking the headphone jack. This compressed air will blow and loosen trapped debris, helping it find its way out. Start by pulling out the headphone jack from the outside, and then gradually work into the jack itself.

Moisture in one breath can damage the headphone jack, which can become permanent. Tweezers can also be used to clean up such abstraction, provided they are small enough to fit into the tiny headphone jack. One should have an idea of \u200b\u200bwhere the obstacle lies before attempting such a procedure.

Reasons and solutions

The main problem with this headset problem is that the user cannot answer calls in normal mode, since he cannot hear the interlocutor. Basically, the gadget simply cuts off the audio to the external speakers, sending signals to the bottom connector. In this case, the headphones themselves are not connected, although the iPhone is in connection mode.

Trying to use the tweezers can damage the sides of the headphone jack, so extra care is recommended. However, if paying for repair or replacement is not a viable option, self-assembly may be the only option. In this case, one attempt to disassemble the entire phone removes the obstructing element and then reassembles the phone.

This approach is not recommended. It is possible that nothing is interfering with the headphone jack, but the jack itself is not working. This can be caused by a number of things. This is one of the most common methods for breaking headphone jacks. In most cases, the owners of these phones cannot understand how their phone got wet.

It is logical to assume that the main reason for the breakdown lies in the operation of the headset jack. And in 90 percent of cases this is true, although the reasons for the malfunction may be as follows:

1. Mechanical impact... As a result of such interference, the integrity of the connector may be violated, due to which it will not work correctly, recognizing the connection, even if it is not there. It will be safer to install a new part in place of the damaged one.

When wrapping the headphones in this way, if the headphones are plugged into a wall outlet, this pushes the plug, straining it to move in the direction of the weight of the headphones, thereby gradually pulling the headphone jack off the logic board. These parts cannot be removed and replaced separately. This creates a serious inconvenience, since the phone will no longer perform its main function without sound. Such damage restricts the use of this smartphone to use applications and the Internet without sound or sending text messages.

They cover their parts and labor for a lifetime warranty. Again, users can try to fix the phone on their own, but this is not recommended as it can be extremely difficult. The tips mentioned above must be followed with care and caution as they can damage the headphone jack without repair.

2. Normal pollution. The headset output may malfunction if it contains a large amount of dirt particles that prevent normal work systems. In this case, routine cleaning of the connector will help.

3. Also, the display of the iPhone system constantly in the headphones is possible if water gets into the lower input of the iPhone. To restore it, you need to hand over the gadget to specialists for special cleaning with the removal of oxidation products.

Those looking to repair a damaged phone should exercise patience, care and concern when trying to repair their phones. While a mistake can be catastrophic, the cost of repairs makes such a risk. There is no specific solution or reason for this problem. It could be a headphone issue, software glitch, or hardware glitch.

Try plugging in your headphones and then gently plug it back in. Most of the time this would fix the problem. But if it is not, then this is not the end of the list, keep reading. Try another pair of headphones. It's time for a treasure hunt. Then take a toothpick or any other thin thing, wrap cotton around it, and then clean the port. If something is bothering the port, then there is a chance to run into a problem in the topic.

In some cases, software malfunctions can lead to an unauthorized switch to headset mode, but such breakdowns occur quite rarely and are eliminated by routine debugging or reinstalling software.

With the release of the new AirPods, many users have encountered problems with quick disconnection or incorrect work headset and smartphone. Also, on new iPhones 7 does not always work correctly more early version headphones - standard EarPods. Let's consider in more detail all the causes of failures and their effective solutions.

Using EarPods on IPhone 7

Do you use your usual EarPods on the iPhone 7? Although this headset is a certified product from Apple, it is not adapted for the IPhone 7. You can only connect the headphones to the charging port using a special adapter.

Reasons why EarPods don't work:

• poor quality adapter;
• inoperative charging port;
• broken plug or broken wire near the plug.

To be able to connect EarPods to the IPhone 7, users often buy third-party adapters with a Lightning port or a modification of the EarPods with the same Lightning output. Unofficial products in 80% of cases will not work with iPhones, so we recommend purchasing only certified products and accessories for the IPhone.

AirPods sync error

AirPods won't connect on your phone? In this case, you need to reset the headset settings:

Resetting the settings removes all bugs and errors in the operation of the hardware components of AirPods. It is recommended to do Hard resetas soon as you discover a problem with the accessory.

The synchronization problem may not only be on the headphone side. Don't forget to check if Bluetooth is enabled on the iPhone. Also, the Bluetooth module may not work in the phone itself. You can solve the problem by replacing the antenna, which is responsible for Wi-Fi and Bluetooth connections.

To replace the antenna, you need to remove the motherboard from the iPhone. To do this, you need a set of tools that can be purchased on our website:

1. sucker;
2. set of screwdrivers;
3. plastic spatula (spudger);
4. tweezers;
5. magnetic surface to accommodate detached parts.

In the figure below, the Wi-Fi / Bluetooth module is outlined in orange on motherboard IPhone 7. Remove the protective cover and replace the antenna with a new part.

AirPods drain quickly

Even if the headphones are fully functional, many users still have difficulty using a new headset. One such problem is the need to charge the headphones very often.

The charging level of an accessory can be viewed by connecting it to an iPhone. The headphones come with a special chargerwhere you want to place the headset. If your AirPods are running low on battery power, always carry a power adapter with you. This phenomenon is quite normal, and Apple representatives argue the short operating time of the headphones with a compact battery that was built into the case. The typical runtime for AirPods to turn off completely is 3 to 4 hours.

You can easily extend the life of your headset. To do this, insert one earphone into the charger, and with the other continue to listen to music. This will not stop playing the track.

Apple slightly delayed the release of new wireless AirPods, thanks to which, they say, the company was able to resolve whole line technical problems that inevitably happen with new devices. However, judging by the reviews, not all airPods problems Apple specialists got it right.

On the other hand, most of the troubles that users most often complain about can be classified as standard. That is, those that the user himself can eliminate without much effort.

If it comes to business, competently.

In this regard, about what can happen from in the process of their operation, and what should be done in such cases.

airPods problems - not connecting

If one or both AirPods suddenly stopped connecting to the iPhone, iPod or iPad with which you habitually use them, then the first thing you need to do is just insert them into the case. Next, wait at least 10 seconds, then take out both headphones and insert them into your ears. After another 3-5 seconds, AirPods should automatically connect to any of the already "familiar" devices, if one is nearby and in working order.

During the process, the connection indicator on the headphone case should flash white. If the white color of the indicator is not observed, close the case, press the reset button, hold it down, open the case again and look at the color of the indication. It either immediately turns white, or you need to hold the button down a little longer until it blinks yellow several times, and then finally blinks white.

If the headphones are still not connected, then you need to turn off and turn on Bluetooth, to which the headphones are "tied", and to which they do not want to connect at a given time. We open " Control center ", Turn off the Bluetooth module, wait with half a minute , turn it on again and look at the behavior of our AirPods. Connected - good, not connected - reboot them (more on this separately - at the end of the post ).

airPods problems - only one earphone works ( left or right)

As practice shows, this sometimes happens if, for any reason, replace one of the headphones in the pair. Without presetting the new AirPod usually just won't sync with the old one and won't connect to the playback device. To fix the problem, you just need to tell the iPhone, iPad or Mac to "forget" the old AirPods and then connect both existing ones as a new pair. This can be done as follows:

• open " Settings ", Then" Bluetooth »And find old AirPods in the list;
• we tap the letter "i" on the right and then - " Forget this device "(If you did not find the" Forgetting "function in the device settings, try restarting the network settings: "Settings" → "General" → "Reset" → "Reset network settings").

After that, we connect both headphones to the device, following the standard pairing procedure. If after that only one earphone still works, we perform the reboot procedure (see below).

airPods problems - won't connect to Mac

To begin with, we note that if your Mac, let's say, is not very new, then connecting AirPods to it can really be not so easy. But sometimes AirPods for some reason do not want to connect with new Macs. If such an opportunity has occurred, then we begin with the actions listed in the previous paragraph.

But keep in mind that if you turn off Bluetooth on your computer, then all wireless BT-peripherals that worked with it turn off. In particular, a mouse, if it is also Bluetooth. Therefore, instead of disconnecting the Bluetooth-module of the laptop, it is better to try to delete the current pair with the headphones and pair it again ( « System settings"-\u003e" Bluetooth " choose AirPods and click " X «).

By the way, directly from Mac, through iCloud, you can also "untie" the headphones from all your iOS devices with which they are paired, ie. iPhone, iPad and Apple Watch... Only after that it is advisable to restart each of these devices.

New pair with AirPods, once again open bluetooth settings on a Mac and go through the standard pairing procedure. Then iCloud will automatically connect the headphones to all other devices. In the overwhelming majority of cases, failures when connecting AirPods to Apple devices in this way are eliminated.

If AirPods suddenly stop automatically connecting to your Mac, ..

... then you can quickly fix the problem in one of the following ways:

• open " System settings ", Click" Bluetooth ", Further - " Turn off Bluetooth ", Wait at least 30 seconds, then press" Turn on Bluetooth «;
• in the menu bar, click the speaker icon and in the list “ Output device »Indicate AirPods ;
• on Mac, open “ System settings", Click" Bluetooth“, We wait a little while the computer finishes searching for all available Bluetooth devices and AirPods will appear in the list (most likely marked“ Not connected"), Now in the menu bar (at the very top of the screen) we click the speaker icon, we also wait a little while all devices are displayed in the list, select AirPods and wait for a sound signal, which indicates the completion of the headphone connection procedure.
• in some cases also help some reboots Mac contract which clears the old iCloud and Bluetooth cache.

airPods problems - won't connect to Apple Watch

Before connecting Airpods to your smartwatch via Airplay, try turning on Airplane Mode for a few seconds in your Apple Watch, and then turning it off. Trick often helps fix bugs with connecting or syncing headphones to Apple Watch.

airPods problems - not syncing with iCloud

In this case, you just need to log out of iCloud and then log in again. This is often enough to fix various sync bugs. Including those due to which one earphone stops working (this often happens in the first 1-2 days after connecting AirPods).

If reconnecting to iCloud does not help, then the synchronization problem can also be solved by restarting the headphones themselves. The procedure is described below.

airPods problems - disconnected while talking on the phone

There is also such a problem. And it is especially annoying if the call is very important, or the headphones turn off when you are in motion - you drive, walk and run. Such a sudden shutdown occurs for a number of reasons, and therefore the problem is also eliminated in different ways.

We start with the simplest thing - check the charge level of the headphones' batteries. If this is the order, then we switch AirPods to work with phone calls only through one earphone. This is their normal mode, and the AirPods should work seamlessly there. We configure AirPods so that the left or right earpiece always acts as the headset microphone. To do this, tap on the iPhone "Settings" -\u003e "Bluetooth" , in the list of devices we find AirPods and click the letter "i" to the right of the name, then tap “ Microphone "And choose at our discretion" Always Left AirPods" or " Always Right AirPods«.

In addition, you can also try to temporarily disable the automatic ear detection function. The mega-functionality of your AirPods will decrease somewhat from this, but on the other hand, it may be possible to find out why the headphones turn off during a call. On the iPhone, press again "Settings" -\u003e "Bluetooth" , in the list of devices we find AirPods and tap the letter "i" to the right of the name and on the next screen turn off “ Auto ear detection «.

In some cases, restarting the iPhone and / or hard restarting the AirPods helps.

airPods problems - discharge very quickly

Ideally, fully charged AirPods last up to 5 hours offline... A 15-minute charge of fully discharged headphones lasts about 3 hours of use. And the headphones work for about a day if you put them in the case from time to time.

If the autonomy of your AirPods differs markedly from these indicators, then first check if the " Auto detect ear ". Thanks to it, the headphones automatically turn off as soon as you take them out of your ears, and do not waste battery power. Tapay "Settings" -\u003e "Bluetooth", the letter "i" next to AirPods -\u003e "Auto-detect ear" (the switch should be green).

If your headphones run down faster than usual, try opening and closing your AirPods less often next to your iPhone (or iPad). It is believed that the headphones somehow update the Bluetooth connection every time, which also does not help to save the power of their tiny batteries.

If AirPods are discharged very quickly, even if they are not used in any way, then you need to restart them. And if resetting the settings did not produce the desired effect, then it is better to contact the service or the store for advice. It may be that the AirPods will need to be replaced.

how to restart AirPods

The procedure is simple, it takes 20 seconds, but, as you already understood, it allows you to solve many software problems that arise with AirPods. Plus, after rebooting, the headphones. as a rule, they connect faster too. So, in order:

• we put AirPods in the case;
• on the back of the case we find a button, press it and hold it down for at least 20-30 seconds;
• the orange light on the case lights up - the reboot is complete, close the case;
• open the case next to the iPhone, after which the headphones will automatically reconnect to the smartphone;
• iCloud will also automatically reconnect AirPods to all your other Apple devices.

how to clean AirPods

First, regularly. Secondly, if you notice that one earphone began to sound worse (or both began to sound worse at once), then the first step is to inspect both devices for the presence of various kinds of substances on them, that is, dirt.

The longer you wear headphones and the longer you neglect the procedure for caring for them, the more unpleasant this very procedure will end up. For the simple reason that getting earwax accumulated in the holes of AirPods is not only unpleasant, but also difficult.

You can clean AirPods with a regular toothbrush (clean and dry) with soft bristles. If the radiator grilles are heavily clogged, try first to "stir up" the dirt with a brush, and then, with the utmost care, pull it out using ... for example, a vacuum cleaner. And do not forget that in your hands, "ears" for 160 bucks.

In the most extreme case and if your headphones , then you can use your mouth (they say that this is even more effective than a vacuum cleaner). It will hardly work the first time, but if you repeat the procedure several times and with the help of a suitable brush, then sooner or later you will remove the debris from the grates.

We will repeat, there is really little pleasant, therefore it is better not to bring it to this and just clean the headphones at least from time to time, without waiting for them to clog to a completely obscene state.