home » Products and service » Using an iPhone as a modem. How to use iPhone as a modem. Connecting "Modem Mode" via USB

Using an iPhone as a modem. How to use iPhone as a modem. Connecting "Modem Mode" via USB

Can be used as a modem Iphone, it matches certain system requirements and uses the operator's cellular communication.

How to use Iphone as a modem

The first step is to make sure cellular data is on and you have Internet access.

Then open the settings and search there.

It happens that this function is not registered as a separate item in the settings in some versions of IOS. Then it is necessary go to the item "cellular communication" and find the modem mode there.

If the desired item is not there, then it is necessary write settings for the modem yourself.
We select "cellular data network" and find the modem mode there. The same data (APN, username and password) are registered here as in the Internet settings. We reboot the phone and the modem mode appears in the settings as a separate item.

There are three ways use Iphone as a modem

Wi-Fi connection

The easiest way. You must enable modem mode and set password, which will be entered by the person about to connect to your device. We find the network by the name of the device and enter the password.

If you did everything correctly, then your phone will start distributing Wi-Fi, man knowledgeable password will be able to access it and on the phone at the top of the screen you will see the number of connected devices.

USB cable connection

In order to access the Internet from a PC using a USB cable, you need to connect the Iphone to the computer, it is best to do this using the original cable, other cables may make an incorrect connection, or not make it at all, then an inscription will appear on the phone screen that the accessory is not supported.
When you plug the cable into the computer, the question "Trust this computer?" Will appear on the phone screen, answer positively to establish the connection. In Windows 10, 8 and Windows 7, it is required should be installed Apple iTunes (can be downloaded for free from the official site), otherwise the connection will not appear.

Then find your IPhone in network connections and connect, the password is set in the phone.

Connect via Bluetoioth

If you want to use your phone as a Bluetooth modem, you first need to add the device (pair) in Windows. Bluetooth, of course, must be enabled on both the iPhone and the computer or laptop.
Click on the Bluetooth icon in the notification area right click and selecting "Add Bluetooth device".

Then create a pair. The phone and computer displays secret codeif it matches, you need to confirm, then the devices will connect via Bluetooth.

After the pair is successfully created, you need to connect to the Internet through the Iphone hotspot. To do this, go to the "devices and printers" menu on the computer, find the Iphone we need there, right-click and connect.

The message "Modem mode" will appear on the phone, which indicates correct connection... To carry out these operations, you may need the current version of iTunes, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains in touch and has the ability to receive SMS messages and incoming calls. During a conversation, the Internet connection is interrupted and is automatically restored after it ends.

But at the same time, you need to remember two things: working in modem mode, the device discharges much faster, so after finishing work, you need to turn off the "Modem mode" function, and you distribute your mobile traffic, do not overdo it if you do not unlimited Internet, of course. Tariffication is carried out according to the downloaded and transmitted volume of information, which will quickly bring your balance to a zero state.

Enjoy your use.

As soon as users were able to access the Internet from mobile devices using the GPRS protocol from any telecom operator, unprecedented freedom of action and movement appeared. Today, to work remotely, it is enough to have a laptop and a mobile phone with a stable reception signal. Paired with a laptop, it is a workstation that only needs to be configured.

Other than that, nothing is required. Using the iphone as a modem is very convenient. But in 2007, the iphone had no GPRS mode yet. Using it as a modem became possible with the release of the fourth version of the iOS firmware. This was in 2010.

Of course, today many wi-fi access points are installed everywhere, but if the laptop does not see the network, then fortunately there is the possibility of using mobile phone for using the internet.

The first way is to configure using USB

The 4th iOS firmware has the ability to activate the modem mode. To do this, you need to connect the iPhone to the PC via a standard USB cable or via Bluetooth, if one device sees another. This article will discuss the method connect iphone as a modem for the operating room mac systems OS.

In general, the process is similar for the operating room. windows systems... So in any case it won't take much time and effort. The best way is to connect using a regular cable. There will be no question whether the phone sees the computer. The advantages are obvious: the user will not need to set up Bluetooth, the speed of the Internet connection will not be slow, the phone battery will not lose charge.

So, step one - connect your iphone to your computer and go to the settings menu. In the item "main-\u003e network" you need to enable "cellular data transfer". Now it is recommended to configure cellular data parameters, they are determined by each individual operator mobile communication... It's in the cellular data menu. After this check, return to the menu item called "Network" and enter "modem mode".

Here you need to turn it on, and in the window that pops up, select the "USB only" connection type. At this moment, a blinking blue bar will appear on the top of the mobile phone display, which confirms that the modem mode is activated. The computer and phone were set up and now they are automatically connected to the Internet. When wifi module in the computer does not catch the iphone network - the best way out of the situation.

Iphone connection via bluetooth

The second method of connection, as already mentioned, is via Bluetooth. This method is a little more complicated, but in general, everything is quite simple. With the phone, you need to do everything that was described for the method of connecting to the network via a USB cable. But only until modem mode is enabled.

In the second method, you need to select the type of connection via Bluetooth in the window that appears. After that, you can go to the settings operating system Mac OS. There are times when the iphone does not see the computer, then it is necessary to understand the firmware version in more detail. To do this, open a tab called “network” in the “system settings” section.

Next, on the left display, select the “Bluetooth PAN” menu item and find a new device to connect. If the phone sees the computer, then it remains to configure a few items. Go ahead. The next step is to compare the numbers of the firmware versions on the phone and personal computer... Now you can click the "continue" and "connect" buttons - and the Internet connection is ready to use.

The Bluetooth PAN item will be green and will be at the top of the connection list on the phone. In addition, the familiar blue stripe with the signature “modem mode” will appear on the display of the device. What is especially very comfortable is that the iphone will stay connected all this time, as long as the Internet connection is working.

The phone will receive both calls and short sms messages... However, while you are talking on the phone, the Internet connection will be temporarily disconnected. But after you hang up, it will recover automatically. No need to reconfigure. Thus, we talked about two ways to connect the iphone as a modem to a computer.

Each user sees the advantages and disadvantages for their situation. You can choose the one that you consider optimal for your particular case. It is recommended that you make sure you have enough traffic.

After all, when accessing the network through a computer, much more is used than when using the Internet from an iphone. On istore there is more than one kind of application that "sees" how much traffic you have left - it's easy to control.

I think many of you have been in a situation where there is a regular PC or laptop nearby, but there are no Internet access points on it. And access to the network is very necessary from a computer. If you have your own iPhone, then it will help you decide this problem using the modem function.

In this article, we'll talk about how to enable modem mode, if you have it in the settings. There are also cases when this item is simply hidden in the menu, and if you have a similar case, then you will learn how to return this setting. The only thing you need is access to the network on your iPhone (preferably unlimited, since you simply won't notice how you will go into a huge minus on your balance sheet).

How to enable tethering on iPhone

To do this, follow the instructions below:

Go to "Settings".
Click " cellular"And there are two options for the development of events: you see the item "Modem mode" or it is not, but we will talk about this later.
Go to " Cellular network data transmission". It often happens that this setting is at the very bottom, so you scroll to the very bottom. Then you will see blank fields "Name, APN password". You need to enter any username (this will be enough).
Now the active "Modem mode" has already appeared in the settings. If it is in an inactive state, then re-enter the "Cellular" item and turn on the modem.
"Modem mode" is on and all that remains is to connect to it via another device and use the Internet.

Function setting via Wi-Fi, Bluetooth or USB

Apple developers took care of their users in advance and made it so that they give access to Worldwide network via Wi-Fi, Bluetooth or USB, which is quite convenient and easy. Let's take a closer look at each of the methods.

Connecting "Modem Mode" via USB

If you have Windows 7 or older or Ubuntu installed on your computer, then you can easily configure your iPhone as a modem via USB, just follow the instructions below:

Connect the phone via a cable to the computer and you, as a rule, will have a window with a choice of programs to start. Just close it, as it doesn't matter at all for setting up the internet.
Go to "Settings" and go to modem mode, there you will see the item "Shared USB-modem". After turning it on, your computer is in sharing to the Internet.
To disable this mode, simply turn off the USB tethering function on your phone and disconnect the USB cable from your computer.

Connecting "Modem Mode" via Bluetooth

Apple technology also knows how to support Internet access via Bluetooth, and to set up such a connection, follow the instructions:

Connect your phone and computer using Bluetooth data connection.
Set up an Internet connection via Bluetooth on your computer (how to set it up correctly depends on the computer model, so for this information it is better to refer to the instructions that come with the computer).
Go to the "Settings" menu on your phone and turn on "Tethering".
Turn on the USB tethering function. Your phone and computer are now in shared mode.

Connecting "Modem mode" via Wi-Fi

It is very easy to make your phone share the Internet via Wi-Fi, and you will see for yourself now. To do this, follow the instructions:

Open "Settings" and go to the "Modem Mode" menu.
Find the "Wi-fi Hotspot" function and activate it. Now the phone will be able to distribute the Internet via Wi-Fi to which up to eight users can simultaneously connect.
To disable the distribution of Internet access, do everything in the reverse order.

Additional Information

In modem mode, when another device is connected to you, the status bar changes color to blue and displays the number of connected devices, which makes it easy to monitor the status of the Internet distribution.

It should also be remembered that when distributing access to the network via Wi-Fi, only the cellular data network will work.

As you can see, there are many ways to distribute the Internet through your phone. Each method works the same way and does not require additional knowledge. Everything is set up quickly, and in a couple of minutes you can turn your iPhone into an internet hotspot.

Most users of ADSL modems do not know its device, and what internal settings it has. Therefore, users often complain about poor connection, bad connection wireless network, as well as the so-called "lags" and "brakes".

However, in addition to various functions, the ADSL modem also has several modes that change its operation, thereby giving the user a choice in favor of one or another functionality of using the modem.

Let's take a closer look at how to configure the modem mode yourself and how these modes differ.

ADSL Modem Modes

The ADSL modem has two modes:

Bridge mode.
Router mode.

That is, the router operates in bridge mode and router mode. Let's consider these two modes in more detail.

Configuring the modem in the "Bridge" mode

ADSL-modem in the "Bridge" mode works as a usual adapter from the telephone line cord to the network cable to the computer. This mode is necessary because it is impossible to connect a telephone wire directly to the computer's network card.

Find the ip-address of the modem in the documentation and enter it in address bar browser.
In the opened window for accessing the modem settings, you must enter the username and password, which can also be found in the documentation. Usually the default username and password is the word "admin", however, different models of the modem may have different username and password.
You can find the necessary functions in the modem settings. If you cannot find it, you can use the documentation or contact the company that produced the modem.

After that the modem will work in the "Bridge" mode.

Configuring ADSL modem in "Router" mode

If you have a lot of electronic devices in your apartment that require the Internet, then the "Router" mode for an ADSL modem is best suited. In this mode, the modem will be assigned a network ip-address, which will be the same for all devices that will be connected to the modem's common access point. Also in this mode, you can configure a wireless Wi-Fi network so as not to be dependent on wires.

In this mode, instead of a computer, the modem is authenticated and receives network data from the provider, simplifying the work. The modem acts as a server. However, for this, you will need to enter the necessary data from the network provider in the modem settings.

In addition, in this mode, the modem acts as an additional protection against malware the Internet. And also other functions of the modem will become available, such as protecting the network with a username and password, which will allow you not to be afraid of neighbors "sucking on the channel" around your apartment.

All settings are also made through the virtual modem service, as described in the previous section. All information should be available in the documentation or on the website of the modem manufacturer

You can also read our article, where it is described in detail about the internal settings of the modem.

Users of "operating systems" version 9 often report such an error as the modem mode disappeared. On iPad mode modem is most often faulty when updating more early versions devices up to iOS 9.

The problem manifests itself in different ways, depending on the communication company whose SIM card is in the gadget. For some users, the option disappears without a trace from the corresponding menu, for others it does not function correctly. Sometimes it is not possible to enable modem mode at all.

This article will discuss the causes of such a problem and how to fix them.

Reasons why the option is missing

Usually, a malfunction manifests itself equally on absolutely any gadget (second iPad and others), and with any telecom operator (Yota and the like). And all because it is in no way related to hardware problems or specifics specific model device. In 95% of cases, the malfunction manifests itself after the procedure for updating the device to a more "fresh" version. By experience, users have found out that the cause of the failure is resetting the configuration of the settings of the cellular company.

As a rule, it can be set automatically. All the necessary data is contained in the SIM card memory. However, when you upgrade, everything that can be reset is reset and modem mode stops working.

Error correction methods

The algorithm for solving the problem, based on its essence, will be identical for all iOS gadgets (iPad 2, iPad mini, Pro and others). The user is required to configure the APN for modem mode.

What does this mean? This is the name and at the same time the address of the access point through which the user connects to the network. Of course, you need a password and username. The communications company will read these characters and assign the correct IP address to the network. Next, it will connect to the appropriate security element. It will also determine if you need to set up a connection using private networks. In the situation we are considering, when using the modem mode, the gadget will transfer access to its communication company to other devices over the network.

The user is required to perform the following actions:

Opening the settings, going to the cellular point. Then you need to go to the cellular data network.
On the page that pops up, the modem mode item will be visible, and under it there are 3 fields. If they are empty, you must fill them in. For the correct operation of the mode we need, a competent APN configuration is required.
Filling in the fields in accordance with the data of a specific operator.

This information can be found in the contract with the communications company. Or contact the office of the firm directly. Usually, after applying all the methods, the problem is solved, and the device can again be used as a modem for any operators - Yota and others.

Device malfunction

How to enable the mode in question if it began to disappear?

If the firmware did not give anything, then the problem lies in the hardware malfunction of the device. It is likely that the modem module is faulty and therefore the modem mode on the iPad does not work. There is nothing you can do about it - you have to go to the repair shop. It will not be possible to simply connect the network to the iPad if the problem has not been fixed.

Note that in the ninth version of the "operating system" the problem with the incorrect operation of the modem mode is solved very simply. The user must use the username and password for the operator's access point. But if this step does not help, be sure to contact a specialist. Experienced technicians will identify the source of the problem and fix it. And the device can again be used as a modem (for Yota and other operators).

How many times it happens that there is a computer, you need to connect to the Internet from your PC, but there is no way to enter through Wi-Fi. What then is to be done? Is it possible and how to share Wi-fi from an iPhone?

Apple iPhone 6 can be used not only as a phone, but at the same time as a modem, while distributing the Internet within the range of your network.

This process can be ensured fairly quickly by following a series of simple steps. The modem mode can also be distributed to the iPhone 6 apple smartphones for iPhones 4s, 5s, 6, 6 plus and 7. You can distribute the Internet to other Apple devices and to any phones, as well as tablets and computers. In turn, other devices such as iPads, Android OS phones, tablets and computers are also capable of distributing the Internet as a modem.

Having a SIM card for accessing the Internet at high speed from network operators such as MTS, Tele 2, Yota or Beeline, or others mobile operators, you can use your iPhone to activate the Wi-Fi hotspot. Of course, it's good if you have unlimited Internet, otherwise the traffic will quickly be used up, and all the money on your phone account will be spent.

You just need to know how to turn on the modem mode on the iPhone 6. You can connect the iPhone as a modem when you need to help your friends, if they run out of traffic on your phone or connect your laptop to the Internet while on the road. The good news is that setting up an Internet access point will take just a couple of minutes, unlike stationary routers and removable modems.

You can distribute the Internet from an iPhone to any device in different ways: via wireless WI-FI mode, using the Bluetooth function, via a USB cable to a tablet device or PC. Of course, it is certainly more convenient and faster to transfer via Wi-Fi wireless mode.

Consider the option of how to distribute the Internet using WI-FI. In order to resolve the issue of how to set up and connect the modem mode, how to distribute wifi from the iPhone 6, read the following connection procedure. Open the main menu of your smartphone screen and enter the "Settings" of the phone, then - in the "Cellular" section and select the "Cellular data network" function. Then connect the "Modem mode", having previously entered the secret password. Specify possible point your access for the network connection is necessary when the password has not been previously entered, otherwise the connection will occur automatically.

The name and the connected hotspot from your smartphone will appear on the receiving devices. That is, a so-called virtual modem will appear in the connected device, through which it will be possible to launch an additional PC or other device to the access point on the iPhone. In this case, you need to use the Wi-Fi password, where it is visible in the settings.

If your friends want to connect their smartphones to your iPhone 6 in order to receive Internet distribution from the iphone in Wi-Fi mode, and your distributing iPhone 6 is already configured for a modem, they can configure a Wi-Fi hotspot in their smartphones, while it is necessary enter the secret access password you have made, and confirm the activation.

When other devices are connected to the smartphone, you will read a message about this on the status bar. By the way, please note that the mode of the connected Wi-Fi modem is not displayed on the screen. Therefore, the battery in the distributing smartphone can be discharged very quickly.

Know that you can distribute high-speed Internet from one source and to several devices at once: iPhone, laptop, iPad and up to 5 devices simultaneously!

The number of receiving instruments connected to the network will certainly affect the speed of battery discharge. The more there are, the faster the discharging iPhone will be discharged.

If you need to change the password for the Wi-Fi network, go to "Settings" again, go to "Tethering" and set new password for wifi.

In this case, the selected Wi-Fi password code must contain at least eight ASCII characters. Other characters will not work, since other devices will not be able to connect to your access point in this modem mode. The characters that will not work are characters from languages \u200b\u200bfrom Japanese, Chinese, or Russian. ASCII characters are:

Upper and lower case letters of the English alphabet;
Arabic numerals from 0 to 9;
other punctuation marks.

IPhone tethering disappeared

Be aware that with the next update of the phone's firmware, the cellular data settings may be reset, so "Modem mode" will again drop out of the menu settings.

Is it possible to do something if you were distributing the Internet and suddenly the modem mode on the iphone began to disappear, turning off everything additional smartphones from the network?

And sometimes, on the contrary, you have updated the iPhone program to version iOS 8.1 or 9 and the modem settings have failed on the distributing iPhone, while the device reports that the modem mode is not available.

Sometimes the modem mode just disappeared and does not work, but it happens that the download does not occur and the modem constantly freezes when connected persistently.

Don't think that the dial-up service is gone or gone. When connecting, it happens as if the six simply turned off the modem function by default, deciding that the owner of the device does not use this service. In fact, this function has ceased to be enabled in order to avoid the company's responsibility for the operation of the modem connection service, taking into account the peculiarities of the settings of various Internet companies, as well as operators of different countries.

Most users, without hesitation, connect their iPhone 6 as a modem constantly to different devices, so setting a blocking of this function causes indignation of users due to the inability to solve current tasks. You can also solve this problem by restarting the modem.

Removing modem mode

A missing modem can be restored by applying the tethering deactivation process in iPhone 6 or iPhone 6S - quite possible if installed iOS program 9. In this case, the subscriber must first turn on the modem mode, then manually enter the parameters of his direct operator, for example, the Beeline operator must be written - Beeline, Tele2. In this case, the procedure for entering the settings must be performed in a clearly defined sequence.

If, nevertheless, when connecting to your network, a message appears on the screen: "Unable to connect to the network", you need to eliminate the problem body that prevents the connection. To do this, take the following steps in stages:

Log in from the iPhone to the "Settings" section of the menu and go to the "General" menu.
Go down to the bottom of the page, find the "Reset" function, then - "Reset network settings".
Enter your secret password and wait for the factory reset process to complete.
Reconnect to the network.

The above process should launch the iPhone Tethering feature on the iPhone 6.

If it so happens that after replacement SIM card the distributed Internet has disappeared in the smartphone, and the modem mode has turned off, double-check and enter the correct data of the SIM card operator.

By the way, in practice iPhone network 6 and operator Yota don't really like each other. If you have updated iOS 8 to version 8.1, then there may well be problems with connecting the modem.

Sometimes there are problems associated with the lack of access to free Wi-Fi. In this case, an Iphone can be used as a modem, which meets certain system requirements and uses the cellular communication of the operator providing the modem service on this device... Only then will he create a portable Internet access point and be able to distribute Wi-Fi to other devices, as well as using bluetooth and USB cable. Setting up functions does not take much time, unlike routers.

Previously, for these purposes, it was required to install additional software, now all the necessary functions are in standard iOS, which makes it easy and quick to enable, configure and operate. But at the same time you need to remember that working in modem mode, Iphone discharges much faster, so after finishing work, you need to turn off the "Modem mode" function.

How to distribute Internet from Iphone

Iphone, which is equipped with a cellular module and has a connection to the mobile Internet, will be able to distribute the Internet to other devices. If you have unlimited or inexpensive tariff planthen you are not in trouble. Very often, billing is carried out according to the downloaded and transmitted volume of information, which will quickly bring your balance to zero. To use your Iphone as a modem, you must first make sure Cellular Data and Enable 3G / 4G LTE are enabled. To do this, go to the "Settings" tab and select "Cellular". Next, go to the "Modem mode" option and enable this function. The system may ask you to activate Bluetooth for this. A message about the "Modem mode" function will light up on the phone screen. It remains only to specify the password Wi-Fi connections and start distributing the Internet. It is recommended that the password contains at least 8 characters. These include uppercase and lowercase English letters, numbers, and punctuation marks. With these simple steps, you can connect to the Internet from a computer or other devices based on Windows, Android or Linux. Wi-Fi function automatically disconnects if you disconnect all connected devices from the access point.

We distribute the Internet from the Iphone via a USB cable

You can also use your own Iphone to distribute the Internet with via USB cable. In this case, the loss of Internet speed is excluded, and the phone is not discharged. To do this, connect the Iphone to the computer and go to the "Control Panel". Here we select the function "Network and Internet" and then "View the status of the network and tasks." The connection must be activated, if not, then we make this manipulation. Sometimes you need to restart your computer to display the connection. In the "Modem mode" function, switch the option to "USB only".

We distribute the Internet from the Iphone via Bluetooth

To connect to Iphone via Bluetooth, you need to pair it with your computer. The computer monitor shows a code that is entered into the Iphone to activate the "Pair" function. Then you can connect from the computer to the device. The phone will display the message "Modem mode", which indicates the correct connection. To carry out these operations, you may need the current version of iTunes, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains in touch and has the ability to receive SMS messages and incoming calls. During a conversation, the Internet connection is interrupted and is automatically restored after it ends.

Surely many iPhone users know that it can be used as a modem. This can be done via USB, Wi-Fi or Bluetooth connection. However, not every iPhone owner knows how to properly enable modem mode on his gadget and use it to access the network in Windows or Mac OS X.

It is worth noting that very few people use this function on the territory of our country. This may be due to the fact that telecom operators can specifically block the ability to access the Internet for several devices through one. If it does not work out, start the modem mode on apple device, then you should contact your telecom operator for detailed information.

To launch this mode on iPhone, you need to go to "Settings", where select "Cellular". Here you need to make sure that in the "Cellular data" section, data exchange is activated. mobile network... If it is disabled, then this mode will not be visible in the parameters.

If everything is in order, then you need to click on "Modem Mode" and activate it. If at the same time Bluetooth or Wi-Fi is disabled, an offer to activate them will pop up. This will allow it to be used not only via a USB cable, but also via Bluetooth. In addition, it is possible to have your own password for the wireless network, which will be distributed by the iPhone. This is useful if the device will be used as an access point.

Using iPhone as a Windows Modem

Windows is installed on most existing PCs in the world, so the first thing to consider is iPhone applications as a modem just for her. This process is not very different depending on the Windows and iOS version.

USB connection

To be able to use the iPhone as a modem using a USB cable, latest versions Windows, you need to install iTunnes. You can download it from the official resource, and for free. If you don't install iTunes, then the connection is impossible.

After downloading everything you need and activating the modem mode on mobile device, you just need to connect your smartphone via a cord to your PC. When connecting to a PC for the first time, iPhone screen an offer may pop up to confirm the trust of this PC. Here you need to click "Yes", otherwise nothing will work.

After a few seconds, a new one will appear on the PC network connection with the name of the Apple network Mobile Device Ethernet. After that, the Internet should appear. To view the status of the connection, right-click on the connection icon in the system tray and specify "Network Control Center and general access". Next, you need to click "Change adapter parameters", where a list of existing connections will be displayed.

Sharing Wi-Fi from iPhone

If Wi-Fi is launched on the smartphone when the modem mode is activated, then you can
use the device as an access point. In this case, you can simply connect to the wireless network with the name iPhone and a password, which can be set or seen in the modem mode settings on the smartphone. Basically, the connection is correct and you immediately get access to the Internet on your PC.

IPhone Bluetooth tethering mode

If you want to use your smartphone as a BT modem, then you must first add the gadget to Windows. In this case, Bluetooth must be running on both the PC and the smartphone. You can add a gadget using various methods.
You can right-click in the system tray on the BT icon and specify "Add Bluetooth device". In addition, it is possible to do this through the control panel, where you should click on "Devices and Printers", and in the new window click on "Add devices".

In the "top ten" you need to go to "Settings", where you should select "Devices", and then click Bluetooth, after which the search for a gadget will start. After determining the phone, regardless of the option to add, you need to click on the icon with it and click "Link" or "Next".

At this time, a proposal to establish a connection will appear on the display of the device, where you need to click "Create a pair". A window will appear on the PC screen, indicating the correspondence of the codes. Here you need to click "Yes". It must be performed first on a smartphone, and then on a PC.

After these manipulations, you need to go to network connections on the PC and specify the Bluetooth connection. You can also do this using the Win + R combination, where you should write ncpa.cpl and click OK. If the connection has already been created, then no action can be taken.

Then at the top you need to click "View Bluetooth network devices". As a result, a window will appear where the smartphone will be displayed. It is necessary to click on it with the RMB and indicate "Connect via", and then click "Access point". After that, access to the Internet should appear.

Using iPhone in tethering mode on Mac OS X

When connecting the iPhone as a modem to mac computer, then the process is simplified several times. If Wi-Fi is used, then you just need to connect to the iPhone's hotspot with the password, which is specified in the modem parameters of the gadget. It should be noted that the passcode may not be used, but for this, the computer and smartphone must have the same iCloud account.

If you need to use a smartphone via USB, then you just need to connect the phone to the computer and everything will work right away, but for this you need to start the modem mode. If nothing happened, then you should go to the OS X parameters and specify the network. Then you need to select "USB to iPhone", where you need to uncheck "Disconnect if you don't need it."

Only in the case of Buetooth is it necessary to do a few manipulations. In this case, you need to go to the Mac options, where you need to select "Network", and then Bluetooth Pan. Then you need to click "Configure bluetooth device»And find a smartphone. After the connection is established, the Internet will appear on the PC.

In general, that's all possible options using the iPhone as a modem. If there is no modem mode in the smartphone settings, you need to check the data transfer over the mobile network.

Type